Over 30% transparency large area inverted organic solar array by spray

Sariciftci, 1992, Photoinduced electron transfer from a conducting polymer to buckminsterfullerene, Science, 258, 1474, 10.1126/science.258.5087.1474 Yu, 1995, Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunction, Science, 270, 1789, 10.1126/science.270.5243.1789 Yang, 1996, Morphology of composites of semiconducting polymers mixed with C60, Synth. Met., 83, 85, 10.1016/S0379-6779(97)80058-6 Shaheen, 2001, 2.5% efficient organic plastic solar cells, Appl. Phys. Lett., 78, 841, 10.1063/1.1345834 Padinger, 2003, Effects of postproduction treatment on plastic solar cells, Adv. Funct. Mater., 13, 85, 10.1002/adfm.200390011 Brabec, 2002, Effect of LiF/metal electrodes on the performance of plastic solar cells, Appl. Phys. Lett., 80, 1288, 10.1063/1.1446988 Ma, 2005, Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology, Adv. Funct. Mater., 15, 1617, 10.1002/adfm.200500211 Reyes-Reyes, 2005, High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends, Appl. Phys. Lett., 87, 083506, 10.1063/1.2006986 Chen, 2009, Polymer solar cells with enhanced open-circuit voltage and efficiency, Nat. Photonics, 3, 649, 10.1038/nphoton.2009.192 Krebs, 2010, Using light-induced thermocleavage in a roll-to-roll process for polymer solar cells, ACS Appl. Mater. Interfaces, 2, 877, 10.1021/am900858x Krebs, 2009, A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies, J. Mater. Chem., 19, 5442, 10.1039/b823001c Krebs, 2007, Large area plastic solar cell modules, Mater. Sci. Eng. B, 138, 106, 10.1016/j.mseb.2006.06.008 Steim, 2009, Flexible polymer photovoltaic modules with incorporated organic bypass diodes to address module shading effects, Sol. Energy Mater. Sol. Cells, 93, 1963, 10.1016/j.solmat.2009.07.013 Blankenburg, 2009, Reel to reel wet coating as an effieicnt up-scaling techniue for the production of bulk-heterojunction polymer solar cells, Sol. Energy Mater. Sol. Cells, 93, 476, 10.1016/j.solmat.2008.12.013 Niggemann, 2008, Organic solar cell modules for specific applications—from energy autonomous systems to large area photovoltaics, Thin Solid Films, 516, 7181, 10.1016/j.tsf.2007.12.093 Tipnis, 2009, Large-area organic photovoltaic module—fabrication and performance, Sol. Energy Mater. Sol. Cells, 93, 442, 10.1016/j.solmat.2008.11.018 Lungenschmied, 2007, Flexible, long-lived, large-area, organic solar cells, Sol. Energy Mater. Sol. Cells, 91, 379, 10.1016/j.solmat.2006.10.013 Jung, 2010, Annealing-free high efficiency and large area polymer solar cells fabricated by a roller painting process, Adv. Func. Mater., 20, 2355, 10.1002/adfm.201000164 Zimmermann, 2007, ITO-free wrap through organic solar cells—a module concept for cost-efficient reel-to-reel production, Sol. Energy Mater. Sol. Cells, 91, 374, 10.1016/j.solmat.2006.10.005 Manceau, 2011, ITO-free flexible polymer solar cells: from small model devices to roll-to-roll processed large modules, Org. Electron., 12, 566, 10.1016/j.orgel.2011.01.009 Krebs, 2009, All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps, Org. Electron., 10, 761, 10.1016/j.orgel.2009.03.009 Huang, 2008, A Semi-transparent plastic solar cell fabricated by a lamination process, Adv. Mater., 20, 415, 10.1002/adma.200701101 Yu, 2008, Efficient inverted solar cells using TiO2 nanotube arrays, Nanotechnology, 19, 255202, 10.1088/0957-4484/19/25/255202 Li, 2006, Efficient inverted polymer solar cells, Appl. Phys. Lett., 88, 253503, 10.1063/1.2212270 Zou, 2010, Metal grid/conducting polymer hybrid transparent electrode for inverted polymer solar cells, Appl. Phys. Lett., 96, 203301, 10.1063/1.3394679 Waldauf, 2006, High efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact, Appl. Phys. Lett., 89, 233517, 10.1063/1.2402890 Zhou, 2009, Inverted and transparent polymer solar cells prepared with vacuum-free processing, Sol. Eng. Sol. Cells, 93, 497, 10.1016/j.solmat.2008.11.002 Weickert, 2010, Holger Christian Hesse and Lukas Schmidt–Mende, spray-deposited PEDOT:PSS for inverted organic solar cells, Sol. Energy Mater. Sol. Cells, 94, 2371, 10.1016/j.solmat.2010.08.018 Kim, 2010, Performance optimization of polymer solar cells using electrostatically sprayed photoactive layers, Adv. Funct. Mater., 20, 3538, 10.1002/adfm.201000433 Kim, 2010, Substrate heated spray-deposition method for high efficient organic solar cell: morphology inspection, Jap. J. Appl. Phys., 49, 01800, 10.1143/JJAP.49.018002 Lim, 2008, Spray-deposited poly(3.4-ethylenedioxythiophene):poly(styrenesulfonate) top electrode for organic solar cells, Appl. Phys. Lett., 93, 193301, 10.1063/1.3021022 Lewis, 2009, Fabrication of organic solar array for applications in microelectromechanical systems, J. Renewable Sustainable Energy, 1, 013101, 10.1063/1.2998825 Van Zant, 2000 van der Pauw, 1958, A method of measuring the resistivity and Hall coefficient on lamellae of arbitrary shape, Philips Tech. Rev., 20, 220 Kline, 2006, Morphology and charge transport in conjugated polymers, J Macromol. Sci. C: Polym. Rev., 46, 27, 10.1080/15321790500471194 Geiser, 2008, Poly(3-hexylthiophene)/C60 heterojunction solar cells: implication of morphology on performance and ambipolar charge collection, Sol. Eng. Sol. Cells, 92, 464, 10.1016/j.solmat.2007.11.001 Graupner, 1996, Shallow and deep traps in conjugated polymers of high intrachain order, Phys. Rev. B, 54, 7610, 10.1103/PhysRevB.54.7610 Nelson, 2002, Organic photovoltaic films, Curr. Opinion Solid State Mater. Sci., 6, 87, 10.1016/S1359-0286(02)00006-2 Dennler, 2006, A new encapsulation solution for flexible organic solar cells, Thin Solid Films, 511–512, 349, 10.1016/j.tsf.2005.12.091