Examination of organic coatings on metallic substrates by scanning electrochemical microscopy in feedback mode: Revealing the early stages of coating breakdown in corrosive environments

Mayne, 1994, The mechanism of the protective action of paints, vol. 2, 14:22 Grundmeier, 2003, Corrosion Protection by Organic Coatings, vol. 4, 500 Stratmann, 1994, Corrosion protection by organic films, Electrochimica Acta, 39, 1207, 10.1016/0013-4686(94)E0038-2 Rohwerder, 2006, Application of scanning Kelvin probe in corrosion science, 605 Mansfeld, 2006, 463 Darowicki, 2005, Application of the dynamic EIS to investigation of transport within organic coatings, Progress in Organic Coatings, 52, 306, 10.1016/j.porgcoat.2004.06.007 Schmidt, 1998, Scanning Kelvin probe investigations of filiform corrosion on aluminum alloy 2024-t3, Corrosion Science, 40, 1441, 10.1016/S0010-938X(98)00044-4 Leng, 1999, The delamination of polymeric coatings from steel. Part 1: Calibration of the Kelvin probe and basic delamination mechanism, Corrosion Science, 41, 547, 10.1016/S0010-938X(98)00166-8 Fürbeth, 2001, The delamination of polymeric coatings from electrogalvanised steel – a mechanistic approach. Part 1: Delamination from a defect with intact zinc layer, Corrosion Science, 43, 207, 10.1016/S0010-938X(00)00047-0 Rohwerder, 2003, Microscopic aspects of electrochemical delamination: An SKPFM study, Electrochimica Acta, 48, 1235, 10.1016/S0013-4686(02)00831-9 Doherty, 2004, Micro-cells beneath organic lacquers: A study using scanning Kelvin probe and scanning acoustic microscopy, Corrosion Science, 46, 1265, 10.1016/j.corsci.2003.09.016 Reddy, 2004, Breakdown of organic coatings in corrosive environments examined by scanning kelvin probe and scanning acoustic microscopy, Electrochimica Acta, 49, 2965, 10.1016/j.electacta.2004.01.055 Sykes, 2008, Interpretation of scanning Kelvin probe potential maps for coated steel using semi-quantitative current density maps, Corrosion Science, 50, 2773, 10.1016/j.corsci.2008.07.023 Rohwerder, 2009, Application of SKP for in situ monitoring of ion mobility along insulator/insulator interfaces, Electrochimica Acta, 54, 6058, 10.1016/j.electacta.2009.03.012 Worsley, 2000, Influence of remote cathodes on corrosion mechanism at exposed cut edges in organically coated galvanized steels, Corrosion (NACE), 56, 492, 10.5006/1.3280553 Ogle, 2000, Localized electrochemical methods applied to cut edge corrosion, Journal of the Electrochemical Society, 147, 3654, 10.1149/1.1393954 Elvins, 2005, Short term predictive testing for cut edge corrosion resistance in zinc-aluminium alloy galvanised steels, Corrosion Engineering, Science and Technology, 40, 43, 10.1179/174327805X29796 Zin, 2005, Under-film corrosion of epoxy-coated galvanised steel: An EIS and SVET study of the effect of inhibition at defects, Progress in Organic Coatings, 52, 126, 10.1016/j.porgcoat.2004.10.006 Cabral, 2006, The corrosion resistance of hot dip galvanised steel and AA2024-T3 pre-treated with bis-[triethoxysilylpropyl] tetrasulfide solutions doped with Ce(NO3)3, Corrosion Science, 48, 3740, 10.1016/j.corsci.2006.01.010 Ogle, 2006, Observation of self-healing functions on the cut edge of galvanized steel using SVET and pH microscopy, Journal of the Electrochemical Society, 153, B1, 10.1149/1.2126577 Zheludkevich, 2007, On the application of electrochemical impedance spectroscopy to study the self-healing properties of protective coatings, Electrochemistry Communications, 9, 2622, 10.1016/j.elecom.2007.08.012 Lamaka, 2007, Nanoporous titania interlayer as reservoir of corrosion inhibitors for coatings with self-healing ability, Progress in Organic Coatings, 58, 127, 10.1016/j.porgcoat.2006.08.029 Thébault, 2008, Investigation of self-healing mechanism on galvanized steels cut edges by coupling SVET and numerical modeling, Electrochimica Acta, 53, 5226, 10.1016/j.electacta.2008.02.066 Simões, 2009, Corrosion inhibition at galvanized steel cut edges by phosphate pigments, Electrochimica Acta, 54, 3857, 10.1016/j.electacta.2009.01.065 R.M. Souto, B. Normand, H. Takenouti, M. Keddam, Self-healing processes in coil coated cladding studied by the Scanning Vibrating Electrode, Electrochimica Acta (2009), Ref. No. ELECTACTA-S-09-02700. Jorcin, 2006, Delaminated areas beneath organic coating: A local electrochemical impedance approach, Corrosion Science, 48, 1779, 10.1016/j.corsci.2005.05.031 Zhong, 2008, Corrosion of steel under the defected coating studied by localized electrochemical impedance spectroscopy, Electrochimica Acta, 53, 4740, 10.1016/j.electacta.2008.02.014 Dong, 2008, Localized EIS characterization of corrosion of steel at coating defect under cathodic protection, Electrochimica Acta, 54, 628, 10.1016/j.electacta.2008.07.016 Bastos, 2005, Application of the Scanning Electrochemical Microscope to the examination of organic coatings on metallic substrates, Progress in Organic Coatings, 53, 177, 10.1016/j.porgcoat.2005.02.005 González-García, 2005, In situ monitoring of electroactive species by using the Scanning Electrochemical Microscope. Application to the investigation of degradation processes at defective coated metals, Corrosion Science, 47, 3312, 10.1016/j.corsci.2005.07.005 Simões, 2008, Assessment of the corrosion protection of aluminium substrates by a Mg-rich primer: EIS, SVET and SECM study, Progress in Organic Coatings, 63, 260, 10.1016/j.porgcoat.2008.02.007 Shao, 2009, The role of a zinc phosphate pigment in the corrosion of scratched epoxy-coated steel, Corrosion Science, 51, 371, 10.1016/j.corsci.2008.11.015 Souto, 2004, Damage to paint coatings caused by electrolyte immersion as observed in situ by Scanning Electrochemical Microscopy, Corrosion Science, 46, 2621, 10.1016/j.corsci.2004.06.002 Souto, 2008, Evaluation of the corrosion performance of coil-coated steel sheet as studied by Scanning Electrochemical Microscopy, Corrosion Science, 50, 1637, 10.1016/j.corsci.2008.02.019 Souto, 2009, Characterization of coating systems by scanning electrochemical microscopy: Surface topology and blistering, Progress in Organic Coatings, 65, 435, 10.1016/j.porgcoat.2009.03.008 Bard, 1993, Scanning Electrochemical Microscopy, vol. 18, 243 R.M. Souto, Y. González-García, S. González, G.T. Burstein, Imaging the origins of coating degradation and blistering caused by electrolyte immersion assisted by SECM, Electroanalysis (2009), doi:10.1002/elan.200900262. Bragato, 2002, Oxygen as redox mediator in scanning electrochemical microscopy. Application to the study of localised acid attack of marble, Annali di Chimica, 92, 153 R.M. Souto, L. Fernández-Mérida, S. González, SECM imaging of interfacial processes in defective organic coatings applied on metallic substrates using oxygen as redox mediator, Electroanalysis (2009), doi:10.1002/elan.200900232. González-García, 2007, Electrochemical and structural properties of a polyurethane coating on steel substrates for corrosion protection, Corrosion Science, 49, 3514, 10.1016/j.corsci.2007.03.018