Tension and compression tests of two polymers under quasi-static and dynamic loading

Kolsky, 1949, An investigation of the mechanical properties of materials at very high rates of loading, Proceedings of the Royal Society of London, B62, 676 C.J. Maiden, S.J. Green, Compressive strain-rate tests on six selected materials at strain rates from 10−3 to 104 in/in/sec, Transactions of the ASME, Journal of Applied Mechanics (1966) 496–504. Chou, 1973, The effect of strain rate and heat developed during deformation on the stress–strain curve of plastics, Experimental Mechanics, 13, 422, 10.1007/BF02324886 Briscoe, 1985, The flow stress of high density polyethylene at high rates of strain, Polymer Communications, 26, 307 Walley, 1989, A study of the rapid deformation behaviour of a range of polymers, Philosophical Transactions of the Royal Society of London, 328, 1, 10.1098/rsta.1989.0020 Dioh, 1993, Thickness effects in split Hopkinson pressure bar tests, Polymer, 34, 4230, 10.1016/0032-3861(93)90181-9 Gray, 1997, Influence of temperature and strain rate on the mechanical behavior of Adiprene L-100, Journal de Physique IV France, Colloq. C3 (DYMAT 97), 7, 523 Chen, 1997, Dynamic response of Epon 828/T-403 under multiaxial loading at various temperatures, Transactions of the ASME, Journal of Engineering Materials and Technology, 119, 305, 10.1115/1.2812261 Chen, 1998, Constitutive behavior of Epon 828/T-403 at various strain rates, Mechanics of Time-Dependent Materials, 2, 103, 10.1023/A:1009866108965 Ward, 1993 Meyers, 1994 Gray, 2000, Classic split-Hopkinson pressure bar testing, vol. 8, 462 Lindholm, 1968, High strain rate testing: tension and compression, Experimental Mechanics, 8, 1, 10.1007/BF02326244 Chen, 1999, A split Hopkinson bar technique for low-impedance materials, Experimental Mechanics, 39, 81, 10.1007/BF02331109 Follansbee, 1985, The Hopkinson bar, 198 Chen, 1994, Evaluation of ceramic specimen geometries used in split Hopkinson pressure bar, DYMAT Journal, 1, 193 Ravichandran, 1994, Critical appraisal of limiting strain rates for compression testing of ceramics in a split Hopkinson pressure bar, Journal of the American Ceramic Society, 77, 263, 10.1111/j.1151-2916.1994.tb06987.x Chen, 2000, A quartz-crystal-embedded split Hopkinson pressure bar for soft materials, Experimental Mechanics, 40, 1, 10.1007/BF02327540 Campbell, 1970, The temperature and strain-rate dependence of the shear strength of mild steel, Philosophical Magazine, 21, 63, 10.1080/14786437008238397 Klepaczko, 1994, An experimental technique for shear testing at high and very high strain rates. The case of a mild steel, International Journal of Impact Engineering, 15, 25, 10.1016/S0734-743X(05)80005-3 Herrmann, 1956, Three-dimensional and shell-theory analysis of axially symmetric motions of cylinders, Journal of Applied Mechanics, 23, 563, 10.1115/1.4011399 Miklowitz, 1966, Elastic wave propagation, 809 Liu, 1989, The dynamic behavior of an elastic circular tube due to longitudinal impact, JSME International Journal, Series I, 32, 535 Geers, 1972, Analysis of wave propagation in elastic cylindrical shells by the perturbation method, Journal of Applied Mechanics, 39, 385, 10.1115/1.3422689 Gamby, 1991, Asymptotic analysis of wave propagation in a finite viscoplastic bar, Acta Mechanica, 87, 163, 10.1007/BF01299793 Bragov, 1995, Methodological aspects of studying dynamic material properties using the Kolsky method, International Journal of Impact Engineering, 16, 321, 10.1016/0734-743X(95)93939-G Zhao, 1997, On the use of a viscoelastic split Hopkinson pressure bar, International Journal of Impact Engineering, 19, 319, 10.1016/S0734-743X(96)00038-3 Sawas, 1998, Dynamic characterization of compliant materials using an all-polymeric split Hopkinson bar, Experimental Mechanics, 38, 204, 10.1007/BF02325744 Ravichandran, 1991, Dynamic behavior of brittle materials under uniaxial compression, AMD-130, 85 Nemat-Nasser, 1991, Hopkinson techniques for dynamic recovery experiments, Proceedings of the Royal Society of London, A435, 371 Togami, 1996, A split Hopkinson bar technique to evaluate the performance of accelerometers, Transactions of the ASME, Journal of Applied Mechanics, 63, 353, 10.1115/1.2788872 Frew, 2001, A split Hopkinson bar technique to determine compressive stress–strain data for rock materials, Experimental Mechanics, 41, 40, 10.1007/BF02323102 D.J. Frew, M.J. Forrestal, W. Chen, Pulse-shaping techniques for testing brittle materials with a split Hopkinson pressure bar, Experimental Mechanics (2001) submitted for publication. Lakes, 1999 Reedy, 1996, Butt joint strength: effect of residual stress and stress relaxation, Journal of Adhesion Science and Technology, 10, 33, 10.1163/156856196X00436