Box-Behnken statistical design to optimize preparation of activated carbon from Limonia acidissima shell with desirability approach

Singh, 2003, Color removal from wastewater using low-Cost activated carbon derived from agricultural waste material, Ind. Eng. Chem. Res., 1965, 10.1021/ie020800d Mohanty, 2006, Removal of crystal violet from wastewater by activated carbons prepared from rice husk, Ind. Eng. Chem. Res., 5165, 10.1021/ie060257r Bacaoui, 2002, Experimental design to optimize preparation of activated carbons for use in water treatment, Environ. Sci. Technol., 36, 3844, 10.1021/es010305t Lim, 2010, Activation of palm shells by phosphoric acid impregnation for high yielding activated carbon, J. Anal. Appl. Pyrolysis, 88, 181, 10.1016/j.jaap.2010.04.004 Yakout, 2012, Characterization of activated carbon prepared by phosphoric acid activation of olive stones, Arab. J. Chem., 5, S1155 Kobya, 2005, Adsorption of heavy metal ions from aqueous solutions by activated carbon prepared from apricot stone, Bioresour. Technol., 96, 1518, 10.1016/j.biortech.2004.12.005 Tan, 2008, Optimization of preparation conditions for activated carbons from coconut husk using response surface methodology, Chem. Eng. J., 137, 462, 10.1016/j.cej.2007.04.031 Isoda, 2014, Optimization of preparation conditions of activated carbon from agriculture waste utilizing factorial design, Powder Technol., 256, 175, 10.1016/j.powtec.2014.02.029 Prahas, 2008, Activated carbon from jackfruit peel waste by H3PO4 chemical activation: pore structure and surface chemistry characterization, Chem. Eng. J., 140, 32, 10.1016/j.cej.2007.08.032 Samorn Hirunpraditkoon, Penjit Srinophakun, Narumon Sombun, Elvin J. Moore, Synthesis of Activated Carbon from Jatropha Seed Coat and Application to Adsorption of Iodine and Methylene Blue, (n.d.) 37–41. doi:10.1080/00986445.2013.828611. Ozdemir, 2014, Preparation and characterization of activated carbon from grape stalk by zinc chloride activation, Fuel Process. Technol., 125, 200, 10.1016/j.fuproc.2014.04.002 Torne, 2009, Statistical optimization of the synthesis of highly microporous carbons by chemical activation of kraft lignin with NaOH, J. Chem. Eng. Data, 2216, 10.1021/je800827n Teng, 1998, Preparation of activated carbons from bituminous coals with zinc chloride activation, Ind. Eng. Chem. Res., 5885, 58, 10.1021/ie970534h Shakeel, 2014, Box-Behnken statistical design for removal of methylene blue from aqueous solution using sodium dodecyl sulfate self- microemulsifying systems, Ind. Eng. Chem. Res., 53, 1179, 10.1021/ie403271t Montgomery, 2013 Li, 2015, Optimization of preparation process of activated carbon from chestnut burs assisted by microwave and pore structural characterization analysis, J. Air Waste Manage. Assoc., 65, 1297, 10.1080/10962247.2015.1083493 Al-Qaessi, 2010, Production of Activated Carbon from Date Stones by Using Zinc Chloride, Energy Sources Part A: Recovery Util. Environ. Eff., 37 Loredo-Cancino, 2013, Determining optimal conditions to produce activated carbon from barley husks using single or dual optimization, J. Environ. Manage., 125, 117, 10.1016/j.jenvman.2013.03.028 Wang, 2013, Optimization of mesoporous activated carbon from coconut shells by chemical activation with phosphoric acid, BioResources, 8, 6184 Zhang, 2015, Preparation of high specific surface area activated carbon from walnut shells by microwave-induced KOH activation, J. Porous Mater., 22, 1527, 10.1007/s10934-015-0035-5 Gottipati, 2010, Process optimization of adsorption of Cr (VI) on activated carbons prepared from plant precursors by a two-level full factorial design, Chem. Eng. J., 160, 99, 10.1016/j.cej.2010.03.015 Vaez, 2012, Optimization and modeling of photocatalytic degradation of azo dye using a response surface methodology (RSM) based on the central composite design with immobilized titania nanoparticles, Ind. Eng. Chem. Res., 51, 4199, 10.1021/ie202809w Tang, 2013, Optimization of reaction parameters for the synthesis of chromium methionine complex using response surface methodology, Org. Process Res. Dev., 17, 632, 10.1021/op3002905 Varala, 2016, New biosorbent based on deoiled karanja seed cake in biosorption studies of Zr(IV): optimization using Box-Behnken method in response surface methodology with desirability approach, Chem. Eng. J., 302, 786, 10.1016/j.cej.2016.05.088 Yang, 2011, Experimental design to optimize the preparation of activated carbons from herb residues by vacuum and traditional ZnCl 2 chemical activation, Ind. Eng. Chem. Res., 4057, 10.1021/ie101531p Dhawane, 2015, Central composite design approach towards optimization of flamboyant pods derived steam activated carbon for its use as heterogeneous catalyst in transesterification of Hevea brasiliensis oil, Energy Convers. Manag., 100, 277, 10.1016/j.enconman.2015.04.083 Zeng, 2014, Preparation of ultra fi ne nanoparticles under supergravity field and their flame-Retardant properties, Ind. Eng. Chem. Res., 53, 18380, 10.1021/ie502689e Ahmad, 2005, Optimization of coagulation-flocculation process for palm oil mill effluent using response surface methodology, Environ. Sci. Technol., 39, 2828, 10.1021/es0498080 Abnisa, 2011, Optimization and characterization studies on bio-oil production from palm shell by pyrolysis using response surface methodology, Biomass Bioenergy, 35, 3604, 10.1016/j.biombioe.2011.05.011 A. Roy, S. Chakraborty, S.P. Kundu, B. Adhikari, S.B. Majumder, Erratum: Adsorption of anionic-Azo dye from aqueous solution by lignocellulose-biomass jute fiber: Equilibrium, kinetics, and thermodynamics study (Ind. Eng. Chem. Res. (2012) 51 (12095–12106) (DOI: 10.1021/ie301708e))). Zhu, 2014, Optimization of copper (II) adsorption onto novel magnetic calcium alginate/maghemite hydrogel beads using response surface methodology, Ind. Eng. Chem. Res., 53, 4059, 10.1021/ie4031677 Theydan, 2012, Optimization of preparation conditions for activated carbons from date stones using response surface methodology, Powder Technol., 224, 101, 10.1016/j.powtec.2012.02.037 Duan, 2011, Process optimization for the preparation of activated carbon from jatropha hull using response surface methodology, Energy Sources Part A Recovery Util. Environ. Eff., 33, 2005, 10.1080/15567030903515047 Kim, 2011, Surface functionality and carbon structures in lignocellulosic-derived biochars produced by fast pyrolysis, Energy Fuels, 4693, 10.1021/ef200915s Feng, 2004, Adsorption of lead and mercury by rice husk ash, J. Colloid Interface Sci., 278, 1, 10.1016/j.jcis.2004.05.030 Sricharoenchaikul, 2008, Preparation and characterization of activated carbon from the pyrolysis of physic nut (Jatropha curcas L.) waste, Energy Fuels, 31, 10.1021/ef700285u Adinaveen, 2015, Surface and porous characterization of activated carbon prepared from pyrolysis of biomass (rice straw) by two-stage procedure and its applications in supercapacitor electrodes, J. Mater. Cycles Waste Manag., 17, 736, 10.1007/s10163-014-0302-6 Baccar, 2009, Preparation of activated carbon from Tunisian olive-waste cakes and its application for adsorption of heavy metal ions, J. Hazard. Mater., 162, 1522, 10.1016/j.jhazmat.2008.06.041 Coates, 2000, 10815 Yang, 2007, Characteristics of hemicellulose, cellulose and lignin pyrolysis, Fuel, 86, 1781, 10.1016/j.fuel.2006.12.013 Hu, 2014, Preparation of activated carbon and silica particles from rice straw, ACS Sustain. Chem. Eng., 2, 726, 10.1021/sc5000539