Compressive membrane action in progressive collapse resistance of RC flat plates

Hawkins NM, Mitchell D. Progressive collapse of flat plate structures. In: ACI J Proc, vol. 76(7); 1979. Muttoni, 2008, Punching shear strength of reinforced concrete slabs without transverse reinforcement, ACI Struct J, 105, 440 Mirzaei, Y. Post-punching behavior of Reinforced concrete slabs. PhD thesis, École Polytechnique Fédérale de Lausanne, Switzerland; 2010. 230p. <http://infoscience.epfl.ch/record/148592/files/EPFL_TH4613.pdf>. Sagaseta, 2011, Non-axis-symmetrical punching shear around internal columns of RC slabs without transverse reinforcement, Mag Concr Res, 63, 441, 10.1680/macr.10.00098 Habibi, 2012, Assessment of CSA A23. 3 Structural integrity requirements for two-way slabs, Can J Civ Eng, 39, 351, 10.1139/l2012-013 ASCE-7. Minimum design loads for buildings and other structures. American Society of Civil Engineers, SEI/ASCE-7; 2010. Choi HJ, Krauthammer T. Investigation of progressive collapse phenomena in a multi-story building. In: Eleventh international symposium on the interaction of the effects of munitions with structures, Mannheim, Germany; 2003. Sasani, 2007, Experimental and analytical progressive collapse evaluation of actual reinforced concrete structure, ACI Struct J, 104 Sasani, 2010, Gravity load redistribution and progressive collapse resistance of a 20-story RC structure following loss of an interior column, Struct J ACI, 107, 636 Sasani, 2011, Progressive collapse resistance of an actual 11-story structure subjected to severe initial damage, J Struct Eng, 137, 893, 10.1061/(ASCE)ST.1943-541X.0000418 Kokot, 2012, Static and dynamic analysis of a reinforced concrete flat slab frame building for progressive collapse, Eng Struct, 40, 205, 10.1016/j.engstruct.2012.02.026 Schousboe, 1976, Bailey’s crossroads collapse reviewed, J Constr Div, 102, 365, 10.1061/JCCEAZ.0000612 Carino, 1983, A review of the Skyline Plaza collapse, Concr Int, 5, 35 Kaminetzky, 1991 King, 2004, Collapse of 2000 Commonwealth Avenue: punching shear case study, J Perform Constr Facil, 18, 54, 10.1061/(ASCE)0887-3828(2004)18:1(54) GSA. Progressive collapse analysis and design guidelines for new federal office buildings and major modernization projects. General Services Administration; 2003. DOD. Unified facilities criteria, design of buildings to resist progressive collapse. Washington (DC), US Department of Defense; 2010. Westergaard HM, Slater WA. Moments and stresses in slabs. In: ACI J Proc, ACI; 1921. Ockleston, 1955, Load tests on a three storey reinforced concrete building in Johannesburg, Struct, Eng, 33, 304 Ockleston, 1958, Arching action in reinforced concrete slabs, Struct Eng, 36, 197 Park, 1964, The ultimate strength and long-term behavior of uniformly loaded, two-way concrete slabs with partial lateral restraint at all edges, Mag Concr Res, 16, 139, 10.1680/macr.1964.16.48.139 Criswell ME. Static and dynamic response of reinforced concrete slab–column connections. ACI Special Publication, SP 42-31; 1974, p. 721–46. Hewitt, 1975, Punching shear strength of restrained slabs, J Struct Div, 101 Vecchio, 1990, Membrane action in reinforced concrete slabs, Can J Civ Eng, 17, 686, 10.1139/l90-082 Salim, 2003, Punching shear failure in reinforced concrete slabs with compressive membrane action, ACI Struct J, 100 Jahangir Alam, 2009, Experimental investigation of edge restraint on punching shear behavior of RC slabs, IES J Part A: Civ Struct Eng, 2, 35 Pinho Ramos, 2011, Punching of flat slabs with in-plane forces, Eng Struct, 33, 894, 10.1016/j.engstruct.2010.12.010 Dat, 2011, Membrane actions of RC slabs in mitigating progressive collapse of building structures, Eng Struct, 55, 107, 10.1016/j.engstruct.2011.08.039 Dat, 2013, Experimental study of beam–slab substructures subjected to a penultimate-internal column loss, Eng Struct Kinnunen S, Nylander H. Punching of concrete slabs without shear reinforcement. In: Trans Royal Instit Tech, Stockholm, Sweden, vol. 3(158); 1960. p. 1–112. Moe J. Shearing strength of reinforced concrete slabs and footings under concentrated loads. Development department bulletin No. D47, Portland Cement Association, Skokie I11; 1961. 130p. SIA 262. Concrete structures. Schweizerischer Ingenieur- und Architektenverein (SIA), Zurich; 2003. EC2. 1-2: 2004 Eurocode 2: design of concrete structures-Part 1-1: General rules and rules for buildings. European Standards, London; 2004. ACI 318. Building code requirements for structural concrete (ACI 318-11) and commentary (ACI 318R-11). American Concrete Institute; 2011. Mirzaei, 2008 Loo, 1997, Cracking and punching shear failure analysis of RC flat plates, J Struct Eng, 123, 1321, 10.1061/(ASCE)0733-9445(1997)123:10(1321) Vidosa, 1988, Symmetrical punching of reinforced concrete slabs: an analytical investigation based on nonlinear finite element modeling, ACI Struct J, 85 Polak, 1998, Modeling punching shear of reinforced concrete slabs using layered finite elements, ACI Struct J, 95 Megally, 2000, Punching of concrete slabs due to column moment transfer, J Struct Eng, 126, 180, 10.1061/(ASCE)0733-9445(2000)126:2(180) Wang, 2008, Finite-element analysis of reinforced concrete flat plate structures by layered shell element, J Struct Eng, 134, 1862, 10.1061/(ASCE)0733-9445(2008)134:12(1862) ACI-ASCE Committee 426. Shear strength of reinforced concrete members-slabs. In: Proc, ASCE, 100(ST8); 1974. p. 543–1591. Mitchell, 1984, Preventing progressive collapse of slab structures, J Struct Eng, 110, 1513, 10.1061/(ASCE)0733-9445(1984)110:7(1513) Knoll, 2009, Design for robustness, Struct Eng Documents, 11, 99 Lubliner, 1989, A plastic damage model for nonlinear analysis of concrete, Int J Solids Struct, 25, 299, 10.1016/0020-7683(89)90050-4 Lee, 1998, Plastic-damage model for cyclic loading of concrete structures, J Eng Mech, 124, 892, 10.1061/(ASCE)0733-9399(1998)124:8(892) Abaqus INC. Standard user’s manual, 6.9 edition; 2010. Kupfer H, Hilsdorf HK, Rusch H. Behavior of concrete under biaxial stresses. In: ACI J Proc, ACI; 1969. Fib. Punching of structural concrete slabs. Fib bulletin 12, (fédération internationale du béton), Suisse; 2001. Long AE. A two-phase approach to the prediction of the punching strength of slabs. In: ACI J Proc, ACI; 1975. Theodorakopoulos, 2002, Ultimate punching shear strength analysis of slab–column connections, Cem Concr Comp, 24, 509, 10.1016/S0958-9465(01)00067-1 Guandalini S. Poinçonnement Symétrique Des Dalles En Béton Armé, Thèse de doctorat, N. 3380, Lausanne, Switzerland. (French); 2005. 289p. Guandalini, 2009, Punching tests of slabs with low reinforcement ratios, ACI Struct J, 106, 87 Muttoni, 2008, Shear strength of members without transverse reinforcement as function of critical shear crack width, ACI Struct J, 105, 163 Dragosvic, 1974, Punching shear, Heron, 20, 48 Sacramento, 2012, Punching strength of reinforced concrete flat slabs without shear reinforcement, Rev IBRACON Estruturas Mater, 5, 659, 10.1590/S1983-41952012000500005 ACI-ASCE Committee 426. Suggested revisions to shear provisions for building codes. American Concrete Institute, Detroit; 1978. 88p. ACI Committee 349. Code requirements for nuclear safety related concrete structures. American Concrete Institute; 2001. Fenwick, 1993, Elongation and load deflection characteristics of reinforced concrete members containing plastic hinges, Bull NZNSEE, 26, 28 Kim, 2004, Effect of beam growth on reinforced concrete frames, J Struct Eng, ASCE, 130, 1333, 10.1061/(ASCE)0733-9445(2004)130:9(1333) Bresler B, Pister KS. Strength of concrete under combined stresses. In: ACI J Proc, ACI; 1958. Müllers I. Zur Robustheit im Hochbau: Stützenausfall als Gefährdungsbild für Stahlbetontrag-werke. Ph.D. Thesis, ETH, Zurich, Switzerland; 2007. ACI-ASCE Committee 352.1R-11. Guide for design of slab–column connections in monolithic concrete structures. American Concrete Institute; 2012. Sasani, 2008, Response of a reinforced concrete infilled-frame structure to removal of two adjacent columns, Eng Struct, 30, 2478, 10.1016/j.engstruct.2008.01.019