A Phenomenological Constitutive Model for Describing Thermo-Viscoplastic Behavior of Al-Zn-Mg-Cu Alloy Under Hot Working Condition
Tóm tắt
In order to predict the high-temperature deformation behavior of Al-Zn-Mg-Cu alloy, the hot compression tests were conducted in the strain rate range of (0.001–0.1)s−1 and the forming temperature range of (573–723) K. Based on the experimental results, Johnson-Cook model was found inadequate to describe the high-temperature deformation behavior of Al-Zn-Mg-Cu alloy. Therefore, a new phenomenological constitutive model is proposed, considering the coupled effects of strain, strain rate and forming temperature on the material flow behavior of Al-Zn-Mg-Cu alloy. In the proposed model, the material constants are presented as functions of strain rate. The proposed constitutive model correlates well with the experimental results confirming that the proposed model can give an accurate and precise estimate of flow stress for the Al-Zn-Mg-Cu alloy investigated in this study.
Tài liệu tham khảo
Robinson JS, Tanner DA, Truman CE, Wimpory RC (2011) Measurement and prediction of machining induced redistribution of residual stress in the aluminium alloy 7449. Exp Mech 51:981–993
Díaz FV, Bolmaro RE, Guidobono APM, Girini EF (2010) Determination of residual stresses in high speed milled aluminium alloys using a method of indent pairs. Exp Mech 50:205–215
Dorogoy A, Karp B, Rittel D (2011) A Shear compression disk specimen with controlled stress triaxiality under quasi-static loading. Exp Mech doi:10.1007/s11340-011-9482-3
Rajamuthamilselvan M, Ramanathan S (2011) Hot deformation behaviour of 7075 alloy. J Alloys Compd 509:948–952
Phaniraj C, Samantaray D, Mandal S, Bhaduri AK (2011) A new relationship between the stress multipliers of Garofalo equation for constitutive analysis of hot deformation in modified 9Cr–1Mo (P91) steel. Mater Sci Eng A 528:6066–6072
Lin YC, Chen MS (2009) Numerical simulation and experimental verification of microstructure evolution in a 3-dimensional hot upsetting process. J Mater Process Technol 209:4578–4583
Lin YC, Chen MS, Zhong J (2009) Study of metadynamic recrystallization behaviors in a low alloy steel. J Mater Process Technol 209:2477–2482
Lin YC, Chen MS (2009) Study of microstructural evolution during static recrystallization in a low alloy steel. J Mater Sci 44:835–842
Lin YC, Chen XM (2011) A review of experimental results and constitutive descriptions for metals in hot working. Mater Des 32:1733–1759
Johnson GR, Cook WH (1985) Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Eng Fract Mech 21:31–48
Samantaray D, Mandal S, Bhaduri AK (2009) A comparative study on Johnson-Cook, modified Zerilli-Armstrong and Arrhenius type constitutive model to predict elevated temperature flow behaviour in modified 9Cr-1Mo steel. Comput Mater Sci 47:568–576
Samantaray D, Mandal S, Borah U, Bhaduria AK, Sivaprasad PV (2009) A thermo-viscoplastic constitutive model to predict elevated temperature flow behaviour in a titanium modified austenitic stainless steel. Mater Sci Eng A 526:1–6
Lin YC, Chen XM, Liu G (2010) A modified Johnson-Cook model for tensile behaviors of typical high-strength alloy steel. Mater Sci Eng A 527:6980–6986
Lin YC, Chen XM (2010) A combined Johnson-Cook and Zerilli-Armstrong model for hot compressed typical high-strength alloy steel. Comput Mater Sci 49:628–633
Samantaray D, Mandal S, Bhaduri AK, Venugopal S, Sivaprasad PV (2011) Analysis and mathematical modeling of elevated temperature flow behaviour of austenitic stainless steels. Mater Sci Eng A 528:1937–1943
Hou QY, Wang JT (2010) A modified Johnson–Cook constitutive model for Mg–Gd–Y alloy extended to a wide range of temperatures. Comput Mater Sci 50:147–152
Lin YC, Chen MS, Zhong J (2008) Constitutive modeling for elevated temperature flow behavior of 42CrMo steel. Comput Mater Sci 42:470–477
Mandal S, Rakesh V, Sivaprasad PV, Venugopal S, Kasiviswanathan KV (2009) Mater Sci Eng A 500:114–121
Lin YC, Xia YC, Chen XM, Chen MS (2010) Constitutive descriptions for hot compressed 2124-T851 aluminum alloy over a wide range of temperature and strain rate. Comput Mater Sci 50:227–233
Ji GL, Li FG, Li QH, Li HQ, Li Z (2011) A comparative study on Arrhenius-type constitutive model and artificial neural network model to predict high-temperature deformation behaviour in Aermet100 steel. Mater Sci Eng A 528:4774–4782
Cai J, Li FG, Liu TY, Chen B, He M (2010) Constitutive equations for elevated temperature flow stress of Ti-6Al-4V alloy considering the effect of strain. Mater Des 32:1144–1151
Zener C, Hollomon H (1944) Effect of strain-rate upon the plastic flow of steel. J Appl Phys 15:22–27
Li Q, Wang TS, Jing TF, Gao YW, Zhou JF, Yu JK, Li HB (2009) Warm deformation behavior of quenched medium carbon steel and its effect on microstructure and mechanical properties. Mater Sci Eng A 515:38–42