Analysis of planar multibody systems with revolute joint wear

Dubowsky, 1974, On predicting the dynamic effects of clearances in planar mechanisms, ASME, Journal of Engineering for Industry, 317, 10.1115/1.3438320 Dubowsky, 1971, Dynamic analysis of mechanical systems with clearances. Part 1. Formulation of dynamic model, ASME, Journal of Engineering for Industry, 305, 10.1115/1.3427895 Dubowsky, 1977, Design and analysis of multilink flexible mechanisms with multiple clearance connection, ASME, Journal of Engineering for Industry, 88, 10.1115/1.3439171 Earles, 1973, Motion analysis of a rigid link mechanism with clearance at a bearing using Lagrangian mechanics and digital computation, Mechanisms, 83 Wu, 1977, A determination of contact-loss at a bearing of a linkage mechanism, Journal of Engineering for Industry, Series B, 99, 375, 10.1115/1.3439239 Furuhashi, 1978, Research on dynamics of four-bar linkage with clearances at turning pairs. 1st Report: general theory using continuous contact model, JSME, 21, 518, 10.1299/jsme1958.21.518 Morita, 1978, Research on dynamics of four-bar linkage with clearances at turning pairs. 2nd Report: analysis of crank-lever mechanism with clearance at joint of crank coupler using continuous contact model, JSME, 21, 1284, 10.1299/jsme1958.21.1284 Morita, 1978, Research on dynamics of four-bar linkage with clearances at turning pairs. 3rd Report: analysis of crank-lever mechanism with clearance at joint of coupler and lever using continuous contact model, JSME, 21, 1292, 10.1299/jsme1958.21.1292 Furuhashi, 1978, Research on dynamics of four-bar linkage with clearances at turning pairs. 4th Report: forces acting at joints of crank-lever mechanism, JSME, 21, 1299, 10.1299/jsme1958.21.1299 Farahanchi, 1994, Chaotic and periodic dynamics of a slider-crank mechanism with slider clearance, Journal of Sound and Vibration, 177, 307, 10.1006/jsvi.1994.1436 Rhee, 1996, Dynamic response of a revolute joint with clearance, Mechanisms Machine Theory, 31, 121, 10.1016/0094-114X(95)00061-3 Khulief, 1986, Dynamic analysis of constrained system of rigid and flexible bodies with intermittent motion, Journal of Mechanisms, Transmissions, and Automations in Design, 108, p.38, 10.1115/1.3260781 Ravn, 1998, vol. 2 Flores, 2004, Dynamic analysis for planar multibody mechanical systems with lubricated joints, Multibody System Dynamics, 12, 47, 10.1023/B:MUBO.0000042901.74498.3a Ravn, 2000, Joint clearances with lubricated long bearings in multibody mechanical systems, Journal of Mechanical Design, 122, 484, 10.1115/1.1314867 Flores, 2004, Revolute joints with clearance in multibody systems, Computers and Structures, 82, 1359, 10.1016/j.compstruc.2004.03.031 P. Flores, Dynamic analysis of mechanical systems with imperfect kinematic joints, Ph.D. Thesis, Minho University (Portugal), Guimarães, 2004. Flores, 2006, A study on dynamics of mechanical systems including joints with clearance and lubrication, Mechanism and Machine Theory, 41, 247, 10.1016/j.mechmachtheory.2005.10.002 Nikravesh, 1988 Haug, 1989 Hamid, 1994, vol. 5 Schmitz, 2005, The difficulty of measuring low friction: uncertainty analysis for friction coefficient measurement, Journal of Tribology, 127, 673, 10.1115/1.1843853 Sawyer, 2001, Wear predictions for a simple-cam including the coupled evolution of wear and load, Lubrication Engineering, 31 Blanchet, 1997, The interaction of wear and dynamics of a simple mechanism, Journal of Tribology, 119, 597, 10.1115/1.2833543 Kim, 2005, Finite element analysis and experiments of metal/metal wear in oscillatory contacts, Wear, 258, 1787, 10.1016/j.wear.2004.12.014 Oqvist, 2001, Numerical simulations of mild wear using updated geometry with different step size approaches, Wear, 249, 6, 10.1016/S0043-1648(00)00548-2 Podra, 1997, Wear simulation with the Winkler surface model, Wear, 207, 79, 10.1016/S0043-1648(96)07468-6 Podra, 1999, Finite element analysis wear simulation of a conical spinning contact considering surface topography, Wear, 224, 13, 10.1016/S0043-1648(98)00318-4 Podra, 1999, Simulating sliding wear with finite element method, Tribology International, 32, 71, 10.1016/S0301-679X(99)00012-2 Flodin, 1997, Simulation of mild wear in spur gears, Wear, 207, 16, 10.1016/S0043-1648(96)07467-4 Flodin, 2001, A simplified model for wear prediction in helical gears, Wear, 249, 285, 10.1016/S0043-1648(01)00556-7 Brauer, 2003, Simulation of wear in gears with flank interference—a mixed FE and analytical approach, Wear, 254, 1216, 10.1016/S0043-1648(03)00338-7 Hugnell, 1994, Simulating follower wear in a cam-follower contact, Wear, 179, 101, 10.1016/0043-1648(94)90226-7 Hugnell, 1996, Simulation of the mild wear in a cam-follower contact with follower rotation, Wear, 199, 202, 10.1016/0043-1648(96)06920-7 Nayak, 2006, Predictions of cam follower wear in diesel engines, Wear, 260, 181, 10.1016/j.wear.2005.02.022 Fregly, 2005, Computational wear prediction of a total knee replacement from in vivo kinematics, Journal of Biomechanics, 38, 305, 10.1016/j.jbiomech.2004.02.013 Maxian, 1996, A sliding-distance coupled finite element formulation for polyethylene wear in total hip arthroplasty, Journal of Biomechanics, 29, 687, 10.1016/0021-9290(95)00125-5 Bevill, 2005, Finite element simulation of early creep and wear in total hip arthroplasty, Journal of Biomechanics, 38, 2365, 10.1016/j.jbiomech.2004.10.022 Schmitz, 2004, Wear-rate uncertainty analysis, ASME, Journal of Tribology, 126, 802, 10.1115/1.1792675 Yang, 2005, A test methodology for determination of wear coefficient, Wear, 259, 1453, 10.1016/j.wear.2005.01.026 Mukras, 2009, Numerical integration schemes and parallel computation for wear prediction using finite element method, Wear, 266, 822, 10.1016/j.wear.2008.12.016 Mauntler, 2007, An instrumented crank-slider mechanism for validation of a combined finite element and wear model ESDU-78035 Tribology Series, 1978