Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay

Ngo, 2018, Additive manufacturing (3D printing): a review of materials, methods, applications and challenges, Compos B Eng, 143, 172, 10.1016/j.compositesb.2018.02.012 Tay, 2017, 3D printing trends in building and construction industry: a review, Virtual Phys Prototyp, 12, 261, 10.1080/17452759.2017.1326724 Gosselin, 2016, Large-scale 3D printing of ultra-high-performance concrete–a new processing route for architects and builders, Mater Des, 100, 102, 10.1016/j.matdes.2016.03.097 Farina, 2016, On the reinforcement of cement mortars through 3D printed polymeric and metallic fibers, Compos B Eng, 90, 76, 10.1016/j.compositesb.2015.12.006 Roussel, 2012, The origins of thixotropy of fresh cement pastes, Cement Concr Res, 42, 148, 10.1016/j.cemconres.2011.09.004 Roussel, 2018, Rheological requirements for printable concretes, Cement Concr Res, 10.1016/j.cemconres.2018.04.005 Le, 2012, Mix design and fresh properties for high-performance printing concrete, Mater Struct, 45, 1221, 10.1617/s11527-012-9828-z Kazemian, 2017, Cementitious materials for construction-scale 3D printing: laboratory testing of fresh printing mixture, Construct Build Mater, 145, 639, 10.1016/j.conbuildmat.2017.04.015 3D Printing Entire Buildings: https://www.3dnatives.com/en/3d-printed-house-companies-120220184/(accessed April 21, 2018). Tregger, 2010, Influence of clays on the rheology of cement pastes, Cement Concr Res, 40, 384, 10.1016/j.cemconres.2009.11.001 Kawashima, 2013, Modification of cement-based materials with nanoparticles, Cement Concr Compos, 36, 8, 10.1016/j.cemconcomp.2012.06.012 Qian, 2018, Enhancing thixotropy of fresh cement pastes with nanoclay in presence of polycarboxylate ether superplasticizer (PCE), Cement Concr. Res., 111, 15, 10.1016/j.cemconres.2018.06.013 Assaedi, 2016, Characterizations of flax fabric reinforced nanoclay-geopolymer composites, Compos B Eng, 95, 412, 10.1016/j.compositesb.2016.04.007 Messina, 2018, Alkali activated waste fly ash as sustainable composite: influence of curing and pozzolanic admixtures on the early-age physico-mechanical properties and residual strength after exposure at elevated temperature, Compos B Eng, 132, 161, 10.1016/j.compositesb.2017.08.012 Garg, 2017, A new computational approach for estimation of wilting point for green infrastructure, Measurement, 111, 351, 10.1016/j.measurement.2017.07.026 Committee, 2004, ASTM C 618 standard specification for coal fly ash and raw or calcined natural pozzolan for use as a mineral admixture in concrete, Annu. Book ASTM Stand. Sect., 4 Haden, 1963, Attapulgite: properties and uses, Clay Clay Miner, 10, 284, 10.1346/CCMN.1961.0100123 Dakhane, 2017, Mechanical and microstructural characterization of alkali sulfate activated high volume fly ash binders, Mater Des, 122, 236, 10.1016/j.matdes.2017.03.021 Liddel, 1996, Yield stress measurements with the vane, J Non-Newtonian Fluid Mech, 63, 235, 10.1016/0377-0257(95)01421-7 Williams, 1999, The influence of mixing on the rheology of fresh cement paste, Cement Concr Res, 29, 1491, 10.1016/S0008-8846(99)00124-6 Khayat, 2012, Field-oriented test methods to evaluate structural build-up at rest of flowable mortar and concrete, Mater Struct, 45, 1547, 10.1617/s11527-012-9856-8 Roussel, 2006, A thixotropy model for fresh fluid concretes: theory, validation and applications, Cement Concr Res, 36, 1797, 10.1016/j.cemconres.2006.05.025 Panda, 2018, Experimental study on mix proportion and fresh properties of fly ash based geopolymer for 3D concrete printing, Ceram Int, 44, 10258, 10.1016/j.ceramint.2018.03.031 ASTM C1702-15a, 2015, 8 ASTM C109/C109M-13, 2013, 10 Panda, 2018, Measurement of tensile bond strength of 3D printed geopolymer mortar, Measurement, 113, 108, 10.1016/j.measurement.2017.08.051 Panda, 2017, Additive manufacturing of geopolymer for sustainable built environment, J Clean Prod, 167, 281, 10.1016/j.jclepro.2017.08.165 Ma, 2018, Experimental and modeling study on the non-linear structural build-up of fresh cement pastes incorporating viscosity modifying admixtures, Cement Concr. Res., 108, 1, 10.1016/j.cemconres.2018.02.022 Kawashima, 2012, Study of the mechanisms underlying the fresh-state response of cementitious materials modified with nanoclays, Construct Build Mater, 36, 749, 10.1016/j.conbuildmat.2012.06.057 Tregger, 2010, Influence of clays on the rheology of cement pastes, Cement Concr Res, 40, 384, 10.1016/j.cemconres.2009.11.001 Ferron, 2007, Rheological method to evaluate structural buildup in self-consolidating concrete cement pastes, ACI Mater J, 104, 242 Cheng, 1986, Yield stress: a time-dependent property and how to measure it, Rheol Acta, 25, 542, 10.1007/BF01774406 Kawashima, 2013, Rate of thixotropic rebuilding of cement pastes modified with highly purified attapulgite clays, Cement Concr Res, 53, 112, 10.1016/j.cemconres.2013.05.019 Ferron, 2013, Aggregation and breakage kinetics of fresh cement paste, Cement Concr Res, 50, 1, 10.1016/j.cemconres.2013.03.002 Roussel, 2008, Distinct-layer casting of SCC: the mechanical consequences of thixotropy, Cement Concr Res, 38, 624, 10.1016/j.cemconres.2007.09.023 Panda, 2018, Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing, Cement Concr Compos, 94, 307, 10.1016/j.cemconcomp.2018.10.002 Wolfs, 2018, Early age mechanical behaviour of 3D printed concrete: numerical modelling and experimental testing, Cement Concr Res, 106, 103, 10.1016/j.cemconres.2018.02.001 Li, 2004, Microstructure of cement mortar with nano-particles, Composites Part B, 35, 185, 10.1016/S1359-8368(03)00052-0 Al-Ostaz, 2010, A molecular dynamic and microporomechanics study on the mechanical properties of major constituents of hydrated cement, Compos B Eng, 41, 543, 10.1016/j.compositesb.2010.06.005 Wang, 2014, Effects of nanomaterials on the hydration kinetics and rheology of Portland cement pastes, Adv Civil Eng Mater, 3, 142