Microbial-based metalworking fluids in milling operations

Priarone, 2016, Modelling of Specific Energy Requirements in Machining as a Function of Tool and Lubricoolant Usage, CIRP Annals – Manufacturing Technology, 65, 25, 10.1016/j.cirp.2016.04.108 Brinksmeier, 2015, Metalworking Fluids – Mechanisms and Performance, CIRP Annals – Manufacturing Technology, 64, 605, 10.1016/j.cirp.2015.05.003 Cheng, 2005, Treatment of Spent Metalworking Fluids, Water Research, 39, 4051, 10.1016/j.watres.2005.07.012 Taylor, 1906 Priarone, 2014, Milling and Turning of Titanium Aluminides by using Minimum Quantity Lubrication, Procedia CIRP, 24, 62, 10.1016/j.procir.2014.07.147 Denkena, 2015, Energy Efficient Machining of Ti-6Al-4V, CIRP Annals – Manufacturing Technology, 64, 61, 10.1016/j.cirp.2015.04.056 Vijay, 2007, Predicting Dermal Permeability of Biocides in Commercial Cutting Fluids using a LSER Approach, Toxicology Letters, 175, 34, 10.1016/j.toxlet.2007.09.005 Winter, 2013, Investigation of a New Polymer-Water based Cutting Fluid to Substitute Mineral Oil based Fluids in Grinding Processes, CIRP Journal of Manufacturing Science and Technology, 6, 254, 10.1016/j.cirpj.2013.07.003 Padmanaban, 2013, Development of Bio based Semi-Synthetic Metal Working Fluid in Industrial Waste Water, Procedia Engineering, 64, 1436, 10.1016/j.proeng.2013.09.225 Redetzky, 2014, Microorganisms as a Replacement for Metal Working Fluids, Tribology in Manufacturing Processes & Joining by Plastic Deformation, 2, 357 Redetzky, 2015, The Influence of Cell Counts, Cell Size, EPS and Microbial Inclusions on the Lubrication Properties of Microorganisms, Production Engineering Research and Development, Annals of the WGP, 9, 149, 10.1007/s11740-014-0592-5 Meyer, 2016, Influence of Metalworking Fluid Additives on the Thermal Conditions in Grinding, CIRP Annals – Manufacturing Technology, 65, 313, 10.1016/j.cirp.2016.04.016 Huesmann-Cordes, 2014, Influence of Additives in Metalworking Fluids on the Wear Resistance of Steels, Procedia CIRP, 13, 108, 10.1016/j.procir.2014.04.019 Li, 2006, An Experimental Study of Tool Wear and Cutting Force Variation in the End Milling of Inconel 718 with Coated Carbide Inserts, Journal of Materials Processing Technology, 180, 296 Willey, 2016 Sharma, 2016, Effects of Minimum Quantity Lubrication (MQL) in Machining Processes using Conventional and Nanofluid based Cutting Fluids: A Comprehensive Review, Journal of Cleaner Production, 127, 1, 10.1016/j.jclepro.2016.03.146