An evaluation of multipass narrow gap laser welding as a candidate process for the manufacture of nuclear pressure vessels

Ayres, 2010, Development of reduced pressure electron beam welding process for thick section pressure vessel welds Kim, 1995, Int J Press Vess Pip, 62, 123, 10.1016/0308-0161(95)93969-C Kim, 2001, Effects of alloying elements on mechanical and fracture properties of base metals and simulated heat-affected zones of SA508 steels, Metall Mater Trans A, 32A, 903, 10.1007/s11661-001-0347-8 Lee, 2010, Int J Press Vess Pip, 87, 74, 10.1016/j.ijpvp.2009.11.001 Guo, 2015, Mater Sci Eng.A, 625, 65, 10.1016/j.msea.2014.11.056 Francis, 2007, Mater Sci Technol, 23, 1009, 10.1179/174328407X213116 Hosseinzadeh, 2014, Towards good practice guidelines for the contour method of residual stress measurement, J Eng ASTM E8M 08, 2008, Standard test methods for tension testing of metallic materials, ASTM Int. ASTM E23, 2016, Standard test methods for notched bar impact testing of metallic materials, ASTM Int. Mark, 2012, Acta Mater, 60, 3268, 10.1016/j.actamat.2012.03.022 Traoré, 2014, Plasticity in the contour method of residual stress measurement, Adv Mater. Res, 996, 337, 10.4028/www.scientific.net/AMR.996.337 Guo, 2016, Residual stress distributions in laser and gas-metal-arc welded high-strength steel plates, Mater Sci Technol, 32, 1449, 10.1080/02670836.2016.1175687 Muransky, 2016, Mitigating cutting-induced plasticity in the contour method. Part 2: numerical analysis, Int J Solids Struct, 94–95, 254, 10.1016/j.ijsolstr.2015.12.033 Sun, 2017, Evaluation of errors associated with cutting-induced plasticity in residual stress measurements using the contour method, Exp Mech, 57, 719, 10.1007/s11340-017-0255-5 Smith, 2014, Int J Press Vessels Pip, 120–121, 66, 10.1016/j.ijpvp.2014.05.001 Sanderson, 2000, Advanced welding processes for fusion reactor fabrication, Fusion Eng Des, 49–50, 77, 10.1016/S0920-3796(00)00407-5