A state-of-the-art review of measurement techniques on tire–pavement interaction noise

Measurement - Tập 128 - Trang 325-351 - 2018
Tan Li1,2
1Department of Mechanical Engineering, Virginia Tech, Blacksburg, VA 24061, USA
2Maxxis Technology Center, Suwanee, GA 30024, USA

Tài liệu tham khảo

Li, 2018, Literature review of models on tire-pavement interaction noise, J. Sound Vib., 420, 357, 10.1016/j.jsv.2018.01.026 Campillo-Davo, 2013, An experimental procedure to obtain sound power level of tyre/road noise under Coast-By conditions, Appl. Acoust., 74, 718, 10.1016/j.apacoust.2012.10.007 Siemens, Product Lifecycle Management Soft- ware Inc., “Standards and regulations in pass-by noise testing”, in: Technical info Siemens PLM Software, 2014. P. Zakelj, “Tire tread noise treatment,” in US Patent US6112167, 2000. He, 2011, Analysis of tire tread pattern’s impact on interior vibration and noise based on Wavelet Transform, Appl. Mech. Mater., 66–68, 1755, 10.4028/www.scientific.net/AMM.66-68.1755 He, 2011, The energy distribution of tire-road noise and noisy speech based on wavelet packet, Key Eng. Mater. (Switzerland), 464, 721, 10.4028/www.scientific.net/KEM.464.721 SungWook, 2012, The study of tire pattern noise by using wavelet transform, Appl. Mech. Mater., 105–107, 267 Chen, 2013, Analysis tire tread patterns noise based on Wavelet transform, Adv. Mater. Res., 823, 180, 10.4028/www.scientific.net/AMR.823.180 ISO, “Acoustics - Method for measuring the influence of road surfaces on traffic noise - Part 1: The Statistical Pass-By Method,” ISO 11819-1, 1997. G. Wang, R. Shores, J. Botts, R. Hibbett, “On-Board Sound Intensity Tire-Pavement Noise Study in North Carolina.,” in Final Report No. FHWA/NC/2010-13. North Carolina Department of Transportation, Research and Development Group, 2011, p. 210p-. R.O. Rasmussen, R.C. Sohaney, “Tire/Pavement and Environmental Traffic Noise Research Study,” p. 147p-, 2012. ISO, “Acoustics -- Method for measuring the influence of road surfaces on traffic noise -- Part 4: SPB method using backing board,” ISO/PAS 11819-4, 2013. “Controlled Pass-By Method”, French National Standard NF S S1 119-2, 1999. ISO, “Measurement of noise emitted by accelerating road vehicles -- Engineering method -- Part 1: M and N categories,” ISO 362-1, 2015. ISO, “Measurement of noise emitted by accelerating road vehicles -- Engineering method -- Part 2: L category,” ISO 362-2, 2009. UN, ECE, “ECE, R51 Agreement concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts Which Can Be Fitted and/or Be Used on Wheeled Vehicles and the Conditions for Reciprocal Recognition of Approvals,” 2011. Copeland, 2012, Tire noise pass-by testing system meets latest standards, Sound Vibration, 46, 12 ISO, “Tyres - Coast-by methods for measurement of tyre-to-road sound emission,” ISO 13325, 2003. UNECE, “ECE R117/2011 Uniform provisions concerning the approval of tyres with regard to rolling sound emissions and to adhesion on wet surfaces and/or to rolling resistance,” 2011. General Motors, “Tire Coast Down Noise Evaluation Procedure,” in GMW14469, 2017. Toyota Motor Corporation, “Measurement Methods for Exterior Tire/Road Noise,” in TSA3237, 2007. Sandberg, 2002 Bernhard, 2005, An Introduction to Tire/Pavement Noise of, Asphalt Pavement D.I. Hanson, R.S. James, “Colorado DOT Tire/Pavement Noise Study.,” in: Report No. CDOT-DTD-R-2004-5, Colorado Department of Transportation, 2004. D.M. Lodico, J.L. Rochat, P. Donavan, R.O. Rasmussen, “Overview and application of the Statistical Isolated Pass-By Method (SIP) for determining the influence of road surfaces on vehicle noise (AASHTO TP-98),” in: 41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012, 2012, vol. 3, pp. 2592–2601. Figlus, 2017, Analysis of the influence of different means of transport on the level of traffic noise, Scientific J. Silesian Univ. Technol. Ser. Transp., 97, 27 AASHTO, Standard Method of Test for Determining the Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By (SIP) Method, AASHTO TP 98, 2013. R.O. Rasmussen, “Tire-Pavement Noise Standards - An Update of Tire-Pavement Noise Technical Working Group”, in: Presentation at Pavement Evaluation 2010, Roanoke, Virginia, 2010. AASHTO, 2013, Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method, AASHTO TP 76 AASHTO, 2013, Standard Method of Test for Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous Flow Traffic Time-Integrated Method (CTIM), AASHTO TP 99 J.L. Rochat, A.L. Hastings, D.R. Read, M. Lau, “FHWA Traffic Noise Model (TNM) Pavement Effects Implementation Study,” 2012. J.L. Rochat, D. Lodico, P. Donavan, R.O. Rasmussen, “Overview and application of the Continuous-Flow Traffic Time-Integrated Method (CTIM) for determining the influence of road surfaces on traffic noise,” in: 41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012, 2012, vol. 3, pp. 2602–2611. Illingworth & Rodkin Inc, 2011 P. Donavan, J. Reyff, A. Pommerenck, “Quiet Pavement Pilot Program : Progress Report 3”, in: Report FHWA AZ-12-577, Arizona Department of Transportation, 2012. von Graevenitz, 2018, The amenity cost of road noise, J. Environ. Econ. Manage., 90, 1, 10.1016/j.jeem.2018.04.006 “Directive 2001/43/EC of the European Parliament and of the Council of 27 June 2001 amending Council Directive 92/23/EEC relating to tyres for motor vehicles and their trailers and to their fitting,” 2001. ISO, 1994, Acoustics – Determination of sound power levels of noise sources using sound pressure – engineering method in an essentially free field over a reflecting plane, ISO 3744 ISO, 1996, Acoustics – Noise emitted by machinery and equipment – Rules for the drafting and presentation of a noise test code, ISO 12001 van der Heijden, 1982, A note on the neglect of the Doppler effect in the modelling of traffic flow as a line of stationary point sources, J. Sound Vib., 8, 442, 10.1016/0022-460X(82)90271-1 R. McDaniel, A. Shah, T. Dare, R. Bernhard, “Hot Mix Asphalt Surface Characteristics Related to Ride, Texture, Friction, Noise and Durability,” 2014. Dick, 2010, “Influence of Pavement on Traffic Noise – Statistical Pass-By Measurements of Traffic on Several, Interstate Pavements ISO, 1981, Acoustics – Measurement of noise emitted by accelerating road vehicles – Engineering method, ISO 362 ISO, 1985, Acoustics – Measurement of noise emitted by accelerating road vehicles – Engineering method, ISO 362/Amd 1 T.C. Giorjao, R. Yoneda, A.L. Cherman, A.R. Morais, Tire contribution for pass by noise, in: SAE Technical Papers, 2005. J.A. Ejsmont, U. Sandber, “Tire/Road Noise: Trailer Measurements in Practice,” in: Proc. of INTER-NOISE 85, 1985. AASHTO, 2012, Standard, Method of Test for Determining the Influence of Road Surfaces on Vehicle Noise Using the Statistical Isolated Pass-By (SIP) Method, AASHTO TP 98 AASHTO, 2012, Standard Method of Test for Determining the Influence of Road Surfaces on Traffic Noise Using the Continuous Flow Traffic Time-Integrated Method (CTIM), AASHTO TP 99 T. Siddon, Noise Generation Mechanisms for Passenger Car Tires, in: 84th meeting of the ASA, 1972. R.F. Miller, D.B. Thrasher, Spectral Analyses in Truck Tire Noise Fields, in: SAE West Coast Meeting, Anaheim CA, August 1974, 1974. Reiter, 1974 S. Landers, G. Richards, J. Bradisse, Onboard Tire Sound Level Testing Technique, Highway Tire Noise, Society of Automotive Engineers, no. 762017, 1977. Landers, 1977 M.C.P. Underwood, P. Nelson, “Lorry Tyre Noise”, Vehicle Noise and Vibration, no. C139/84, p. 50p-, 1984. W.F. Reiter, A.C. Eberhardt, “The Relationship between Truck Tire Vibration and Near and Far Field Sound Levels”, Highway Tire Noise, Society of Automotive Engineers, no. 762021, 1977. Eberhardt, 1981, An Experimental and Analytical Investigation of the Vibration Noise Generation Mechanism in Truck Tires, United States Y. Zhang, J.G. McDaniel, M.L. Wang, “Pavement macrotexture estimation using principal component analysis of tire/road noise,” in: Proc. SPIE, Int. Soc. Opt. Eng. (USA), 2014, vol. 9063, p. 90630K (9 pp.)-pp. P.R. Donavan, D.M. Lodico, Measuring Tire-Pavement Noise at the Source (NCHRP Report 630), 2009. SAE, 2014, Sound Level Of Highway Truck Tires, SAE J 57 U. Sandberg, J.A. Ejsmont, “Selection of Tyres with Regard to Noise Emissions”, in: Unpublished, VTI, Sweden, 1992. S. Phillips, S. Kollamthodi, P. Nelson, Investigations of tyre/road noise – Draft report, in: Project report PR/SE/272/2001 S032J/VB, Transport Research Laboratory, Crowthorne, U.K., 2001. Chuang, 2005 Freitas, 2018, Traffic noise and pavement distresses: modelling and assessment of input parameters influence through data mining techniques, Appl. Acoust., 138, 147, 10.1016/j.apacoust.2018.03.019 Ibarra, 2016, Characterization of the road surfaces in real time, Appl. Acoust., 105, 93, 10.1016/j.apacoust.2015.10.023 ANSI, ASA, 2010, American National Standard Method for Determining the Acoustic Impedance of Ground Surfaces, ANSI/ASA, S1 M.M. Osman, D.N. May, “Relative Influence of Pavement Texture and Tire Type on Pavement/Tire Noise”, in: Vehicle Noise Regulation and Reduction, SP-456, 1980, no. 800282. E. Ungar, B. Bronsdon, Tire Noise Data Bank, in: Bolt, Beranek, and Newman, Inc. Report No. 4411, June, 1980, Prepared for the U.S. Environmental Protection Agency, Office of Noise Abatement and Control, EPA Contract No. 68-01-3950., 1980. G. Breyer, “Low-Noise Road Surfaces in Austria”, in: Proceedings of the International Tire/Road Noise Conference 1990, Gothenberg, Sweden, 1990. M. Springborn, “Measurement of Tire/Road Noise and the Influence of the Road Surface,” in: Proceedings of the International Tire/Road Noise Conference 1990, Gothenberg, Sweden, 1990. H. Steven, “Investigations on a Measuring Method for the Tyre/Road Noise of Passenger Cars,” in: Proceedings of the International Tire/Road Noise Conference 1990, Gothenberg, Sweden, 1990. J.D. Chalupnik, “Predicting Roadside Noise Levels from Near Field Trailer Measurements,” in: Proceedings of Noise-Con 1996, Seattle, WA, 1996, vol. 1, pp. 61–66. M.T. McNerney, B.J. Landsberger, T. Turen, A. Pandelides, “Comparative Field Measurements of Tire/Pavement Noise of Selected Texas Pavements,” in: Center for Transportation Research, the University of Texas at Austin, Austin, TX, Report No. 7-2957-2, 2000, p. 56p-. P. Donovan, B. Rymer, Measurement of Tire Pavement Noise Sound Intensity Methodology, in: Proceedings of Asphalt Rubber 2003, 2003. K.P. Biligiri, Asphalt mixtures’ properties indicative of tire/pavement noise, in: PhD Dissertation, ARIZONA STATE UNIVERSITY, 2008. P. Donavan, Sound intensity measurement errors in the presence of large pressure to intensity ratios, in: SAE Technical Paper 951334, 1995. Bloemhof, 1986, Note on the relationship of sound pressure and sound intensity, Appl. Acoust., 19, 159, 10.1016/0003-682X(86)90030-7 Crocker, 1997 Fahy, 1995 Waser, 1984, Introduction to the Two-Microphone Cross-Spectral Method of Determining Sound Intensity, Noise Control Eng. J., 10.3397/1.2827629 P. Donavan, L. Oswald, Quantification of Noise Mechanisms of Blank, Rib, and Cross-Bar Tread Bias-Ply Truck Tires, in: General Motors Research Laboratories, 1981, no. GMR-3750. L. Oswald, P. Donavan, Acoustic Intensity Measurements in Low Mach Number Flows of Moderate Turbulence Levels, in: General Motors Research Laboratories, 1980, no. GMR-3269. P. Donavan, The Role of Acoustic Tube Resonances in the Radiation of Sound from Circumferentially Ribbed Truck Tires, in: General Motors Research Laboratories, 1981, no. GMR-3846. Y. Oshino, H. Tachibana, Noise Source Identification on Rolling Tires by Sound Intensity Measurement, in: Proceedings of the International Tire/Road Noise Conference 1990, 1990, vol. 12, no. 2, pp. 87–92. Bennetts, 2013, Advances in the measurement of road and tyre noise, Acoust. Bull., 38, 35 O. Krauss, F. Gauterin, Analysis of tire road noise using a tire cavity sound measurement system, in: Proceedings - European Conference on Noise Control, 2012, pp. 911–915. Bschorr, 1981, Theoretische und experimentelle Untersuchungen zur Abstrahlung von Reifenlärm, in Interim Report, Messerschmitt-Bölkow- Blohm GmbH O. Bschorr, Bestimmung des straßenbedingten Verkehrslärms durch Messung des Torusgeräusches,” in: VDI Report Nr. 1632, 2001. Wolf, 1997 J. Masino, B. Daubner, M. Frey, F. Gauterin, “Development of a tire cavity sound measurement system for the application of field operational tests,” in: 2016 Annual IEEE Systems Conference (SysCon). Proceedings, 2016, p. 5 pp.-pp. E.U. Saemann G. Dimitri P. Kindt, Tire Requirements for Pavement Surface Characteristics, in: Presented at 7th Symposium on Pavement Surface Characteristics: SURF 2012 Norfolk, VA, 2012, pp. 1–33. U. Sandberg, J.A. Ejsmont, Noise emission, friction and rolling resistance of car tires - summary of an experimental study, in: Proc. of NOISE-CON 2000, Newport Beach, California, 2000. ISO, “Acoustics -- Measurement of the influence of road surfaces on traffic noise -- Part 2: The close-proximity method,” ISO/DIS 11819-2, 2014. CROW, “CPX trailer comparison round robin test data analysis,” in: Report D12-02, 2012. A. Buytaert, “Differences in rolling noise level between the left and the right tire of a CPX-trailer,” in: Proceedings of Forum Acusticum, 2014, vol. 2014–Janua, p. Ecophone; et al.; KFB Poland; Ministry of Science. R.O. Rasmussen, R.J. Bernhard, U. Sandberg, E.P. Mun, “The Little Book of Quieter Pavements.,” Report No. FHWA-IF-08-004, 2007. GB, “Acoustics, Measurement of Noise Inside Motor Vehicles”, in: Chinese Standard GB/T 18697, 2002. General Motors, “Road Noise Test Procedure,” in GMW8460, 2006. Ford Motor Company “Vehicle NVH Test Procedure (VNVHTP C07): Vehicle Operation - Cruise - Coarse & Rough Road”, in: CETP 00.00-R-466, 2004. Ford Motor Company, “Vehicle NVH Test Procedure (VNVHTP # C26): Vehicle Operation - Cruise - Smooth Road (Tire Noise),” in: CETP: 00.00-R-469, 2001. J. Chang, W. WanYing, J. XiaoXiong, C. Jin, W.Y. Wang, X.X. Jin, J. Chang, W. WanYing, J. XiaoXiong, Study on tire noise transfer path identification, in: 2010 10th International Conference on Signal Processing Proceedings (ICSP 2010), 2010, pp. 2629–2632. AVEC, “Full, OBSI System Model”, in: Acoustical and Vibrations Engineering Consultants, Blacksburg, 2012. GM, 2004, Road Tire Noise Evaluation Procedure, General Motors Test Procedure GMN7079TP ASTM, 2009, New Practice for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method, ASTM WK26025 Kohler, 2010 P.R. Donavan, L.J. Oswald, The Identification and Quantification of Truck Tire Noise Sources under On-Road Operating Conditions, in: General Motors Research Laboratories, 1980, no. GMR-3380, pp. 253–258. Hamill, 1985, Airborne Tire/Road Noise Test Method Development, Noise & Vibration Laboratory, General Motors Proving Ground Cantrell, 1988, “Airborne Tire Noise Generation – the Effects of Axle Weight, Tire Inflation Pressure, and Suspension Alignment, Noise & Vibration Laboratory, General Motors Proving Ground G. Rasmussen, “Pin-Point Noise Sources on Vehicles during Pass-By Using Intensity Technique,” in: Proceedings of the International Tire/Road Noise Conference 1990, 1990. H. Stumpf, “Linking Evaluation of Heavy Truck Tyre Noise Measured by ISO 362 with Scale Factors for Sound Intensity,” in: Proceedings of the International Tire/Road Noise Conference 1990, 1990. ANSI, “Precision Methods For The Determination Of Sound Power Levels Of Noise Sources In Anechoic And Hemi-Anechoic Rooms,” ANSI S12.35, 2001. P.R. Donavan, “Tire-Pavement Interaction Noise Measurement under Vehicle Operating Conditions of Cruise and Acceleration,” in: Society of Automotive Engineers Noise and Vibration Conference Proceedings, 1993. H. Hall, S. Bolton, Cooperative Research Program: Correlation of Tire Intensity and Passby SPL”, in Ray W Herrick Laboratories, 1994. J. S. Bolton, H. R. Hall, R. F. Schumacher, J. Stott, S. Bolton, H. R. Hall, R. F. Schumacher, S. J., “Correlation of Tire Intensity Levels and Passby Sound Pressure Levels,” in: Society of Automotive Engineers Noise and Vibration Conference Proceedings, 1995. P.R. Donavan, “An Assessment of the Tire Noise Generation and Sound Propagation Characteristics of an ISO 10844 Road Surface,” in: Society of Automotive Engineers Noise and Vibration Conference Proceedings, 1997. I. Sakamoto, T. Tanaka, N. Katsura, Y. Kujikawa, “Comparison of Sound Intensity Measured Close to Tires Attached to Trailer between On Road and On Roller Bench,” in: Proceedings of Inter-Noise 2003, 2003. I. Sakamoto, T. Tanaka, N. Katsura, Y. Fujikawa, S. Kogawa, “Analysis of Tire/Road Noise Radiation Characteristics under Acceleration Conditions by Sound Intensity,” in: Proceedings of Inter-Noise 2004, 2004. P.R. Donavan, B. Rymer, “Assessment of Highway Pavements for Tire/Road Noise Generation,” in: Society of Automotive Engineers Noise and Vibration Conference Proceedings, 2003. P. Donavan, L. Scofield, An Evaluation of the Effects of Different Portland Cement Concrete Pavement Texturing on Tire/Pavement Noise, in: Proceedings of NoiseCon 2003, 2003. P. Donavan, B. Rymer, “Quantification of Tire/Pavement Noise: Application of the Sound Intensity Method,” in: Proceedings of Inter-Noise 2004, 2004. Donavan, 2006, “Further Development of the Sound Intensity Method of Measuring Tire Noise Performance of In-Situ Pavements”, in California Department of Transportation, Division of Environmental, Analysis Li, 2017, Tire-Pavement Interaction Noise (TPIN) Modeling Using Artificial Neural Network (ANN), PhD Dissertation, Virginia Tech Li, 2017 T. Li, R. Burdisso, C. Sandu, “An Artificial Neural Network Model to Predict Tread Pattern-Related Tire Noise,” in: SAE 2017 Noise and Vibration Conference and Exhibition, June 12-15, 2017, Grand Rapids, Michigan, USA, SAE Technical Paper 2017-01-1904, 2017. T. Li, J. Feng, R. Burdisso, C. Sandu, “The Effects of Tread Pattern on Tire Pavement Interaction Noise,” in: 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, INTER-NOISE 2016 Hamburg, Germany, August 21-24, 2016, 2016, pp. 2185–2196. T. Li, J. Feng, R. Burdisso, C. Sandu, “The Effects of Speed on Tire-Pavement Interaction Noise (Tread-Pattern-Related Noise and Non-Tread-Pattern-Related Noise),” in: 35th Annual Meeting and Conference on Tire Science and Technology, September 13-14, 2016, Akron, Ohio, USA, 2016. SAE, “Sound Level Of Highway Truck Tires,” SAE J 57, 1977. Y. Oshino, H. Tachibana, “Relationships between Road Texture and Tire/Road Noise,” in: Proceedings of Noise-Con 1996, Seattle, WA, 1996, vol. 1, pp. 67–72. Y. Oshino, T. Mikami, H. Tachibana, “Study of road surface indices for the assessment of tire/road noise,” in: Proceedings of Inter-Noise 2001, the Haag, the Netherlands, 2001. Fujikawa, 2004 ISO, “Acoustics -- Measurement of the influence of road surfaces on traffic noise -- Part 2: The close-proximity method,” ISO 11819-2, 2000. AASHTO, 2008, Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method, AASHTO TP 76 L. Khazanovich, B.I. Izevbekhai, “Trend of pavement on board sound intensity with respect to texture degradation patterns in mnroad test cells,” in: Institute of Noise Control Engineering of the USA - 23rd National Conference on Noise Control Engineering, NOISE-CON 08 and Sound Quality Symposium, SQS 08, 2008, vol. 1, pp. 160–172. L.R. Wayson, M.J. MacDonaldA, A. Martin, “On-Board Sound Intensity (OBSI) Study: Phase 2,” in: Final Report, FDOT Project No. #BDT06, 2014, p. 145p-. R.L. Wayson, J.M. MacDonald, M. Berrios, “On-board sound intensity measurements and results in Florida,” in: 24th National Conference on Noise Control Engineering 2010, Noise-Con 10, Held Jointly with the 159th Meeting of the Acoustical Society of America, 2010, vol. 1, pp. 573–584. P.R. Donavan, D. Lodic, “Applicability of on-board sound intensity (OBSI) method to quantifying the effect of pavement type on tire-pavement noise,” in: Institute of Noise Control Engineering of the USA - 23rd National Conference on Noise Control Engineering, NOISE-CON 08 and Sound Quality Symposium, SQS 08, 2008, vol. 1, pp. 173–184. R.O. Rasmussen, R.C. Sohaney, P.R. Donavan, B.C. Rymer, “Improving wayside noise measurements on roadways and at test tracks using on-board sound intensity,” in: 41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012, 2012, vol. 3, pp. 2583–2591. Wang, 2012, Pavement noise investigation on North Carolina highways: an on-board sound intensity approach, Can. J. Civ. Eng. (Canada), 39, 878, 10.1139/l2012-076 P.R. Donavan, D.M. Lodico, Evaluation of on-board sound intensity measurement parameters using a tire noise chassis dynamometer, in: 41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012, 2012, vol. 3, pp. 2555–2569. M. Trevino, T. Dossey, “On-board sound intensity testing of PFC pavements in Texas,” in: Institute of Noise Control Engineering of the USA - 22nd National Conference on Noise Control Engineering, NOISE-CON 2007, 2007, vol. 1, pp. 423–434. D.E. Mogrovejo, G.W. Flintsch, E.D. de León Izeppi, K.K. McGhee, “Effect of Air Temperature and Vehicle Speed on Tire/Pavement Noise Measured with On-Board Sound Intensity Methodology,” in: The Transportation Research Board (TRB) 92nd Annual Meeting, Washington, D.C., January 13-17, 2013, 2013. L. Khazanovich and B. I. Izevbekhai Implication of time-dependent texture degradation on pavement on board sound intensity patterns in MnROAD test cells, in: Proceedings of the International Noise Conference, Dearborn Michigan July 2008, 2008. Carrasco, 2012, Effect of Air Temperature, Vehicle Speed, and Pavement Surface Aging on Tire / Pavement Noise Measured with On-Board Sound Intensity Methodology, Virginia Tech E. Haas, J. Hencken, T. Bennert, “A statistical evaluation of one-third octave band frequencies measured using the on-board sound intensity method,” in: 41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012, 2012, vol. 11, pp. 9464–9475. R. O. Rasmussen, R.C. Sohaney, “Measuring and visualizing tire-pavement noise using on-board sound intensity,” in: ASTM Special Technical Publication, 2012, vol. 1555 STP, pp. 160–169. Cvar, 2000 M. Bergmann, “Noise generation by tire vibrations,” in: Proceedings of INTER- NOISE 80, Miami, FL, 1980, p. 239. Dare, 2013, Accelerometer Measurements of Tire Tread Vibrations and Implications to Wheel-Slap Noise, Tire Sci. Technol., 41, 109, 10.2346/tire.13.410202 Keltie, 1982, Analytical model of the truck tire vibration sound mechanism, J. Acoust. Soc. Am., 71, 359, 10.1121/1.387460 E. L. Dugan and C. B. Burroughs, “Measurement of automobile tire tread vibration and radiated noise,” in: Proceedings of Noise-Con 03, Cleveland, OH, 2003, p. 168. Dare, 2012 N.-A. Nilsson, O. Bennerhult, S. Soderqvist, “External tire/road noise: its generation and reduction,” in: Inter-Noise 80. Noise Control for the 80’s. Proceedings of the 1980 International Conference on Noise Control Engineering, 1980, pp. 245–252. Kostial, 2013, Artificial Neural Networks Application in Modal Analysis of Tires, Measurement Sci. Rev., 13, 273, 10.2478/msr-2013-0040 W.F. Reiter, A.C. Eberhardt, “Experimental investigation of truck tire noise generated through tire vibration,” in: Proceedings of INTER-NOISE 74, Washington, D.C., 1974, p. 467. Fujikawa, 2009, Examination of road roughness parameters for abating tire vibration and radiated noise, Noise Control Eng. J., 57, 77, 10.3397/1.3081450 C.B. Burroughs, E.L. Dugan, “Measurements of blank tire tread vibration and radiated noise,” in: Proceedings of INTER-NOISE 02, Dearborn, MI, 2002, p. 467. K.J. Plotkin, M.L. Montroll, W.R. Fuller, “The generation of tire noise by air pumping and carcass vibration,” in: Proceedings of INTER- NOISE 80, Miami, FL, 1980, p. 273. G. Rocca, P. Kindt, J. M. Middelberg, C. G. DíAz, B. Peeters, and H. Van Der Auweraer, “Indoor vibration testing for high-frequency modal characterization of tyres,” in: Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers ana Information in Engineering Conference, 2011. K. Larsson, W. Kropp, “A high frequency range tyre model based on two coupled elastic plates,” in: Proceedings of INTER-NOISE 99, Fort Lauderdale, FL, 1999, pp. 131–136. W. Kropp, K. Larsson, F. Wullens, P. Andersson, F.-X. Becot, T. Beckenbauer, “The modeling of tyre/road noise - A quasi three-dimensional model,” in: Proceedings of INTER-NOISE 01, The Hague, Holland, 2001, p. 2322. Perisse, 2000, A comparison of the 2D ring and 3D orthotropic plate for modelling of radial tire vibration, 2497 Fujikawa, 1999, “Generation mechanism of tire/road noise, Part 1: Tire vibration cause by road roughness”, in: Proceedings of INTER-NOISE 99, Fort Lauderdale, 319 S. Ullrich, “Drum-measurements of tyre noise as a function of roadway tempera- ture and circumferential forces,” in: Proceedings of INTER-NOISE 93, page 659, Leuven, Belgium, 1993. JASO, “Test procedures for tire noise,” in: Japanese Automobile Standards Organization JASO C606-81, 1981. GB, “轮胎噪声测试方法 转鼓法(Tyre noise test - methods of drum),” GB/T32789-2016, 2016. Ford Motor Company, “Laboratory Dynamometer Procedure for Tire Radiated Noise Measurement”, in: CETP 04.04-E-402, 2016. U. Sandberg, J.A. Ejsmont, “Three basic methods for measurement of tire/road noise,” in: Proceedings of INTER-NOISE 84, page 93, Honolulu, HI, 1984. U. Sandberg, “Review of comparative study of tire:road noise measurements on drums and road.” 1983. J.A. Ejsmont, “Tire/road noise: comparison of road and laboratory measurements and influence of some tire parameters on generation of sound,” in: Statens Väg-och Trafikinstitut. VTI Rapport nr 244A, 1982, p. 47p-. B. Swieczko-Zurek, J. Ejsmont, G. Ronowski, S. S. Taryma, B. Świeczko-żurek, J. Ejsmont, G. Ronowski, S. S. Taryma, “Comparison of road and laboratory measurements of tyre/road noise,” in: INTERNOISE 2014 - 43rd International Congress on Noise Control Engineering: Improving the World Through Noise Control, 2014. ISO, 2014, Acoustics – Specification of test tracks for measuring noise emitted by road vehicles and their tyres, ISO 10844 ISO, “Acoustics - Test surface for road vehicle noise measurement,” in: Technical Report ISO 10844, International Organization for Standardization, 1991. Tong, 2014, Simulation on the radial tire wear noise, Appl. Mech. Mater., 488, 1121, 10.4028/www.scientific.net/AMM.488-489.1121 N.-A. Nilsson, “Principles in the control of external tire/road noise,” in: Proceedings of INTER-NOISE 82, page 123, San Francisco, CA, 1982. BASt (Federal Highway Research Institute), “Der Prufstand Fahrzeug/Fahrbahn der BASt (Federal Highway Research Institute’s vehicle-pavement interaction test facility),” http://www.bast.de/EN/Automotive_Engineering/Technology/Technology_node.html. R.J. Bernhard, W.D. Thornton, “Preliminary results using the tire/pavement test apparatus,” in: Proceedings of INTER-NOISE 03, Jeju, South Korea, 2003. Park, 2001, Visualization of pass-by noise by means of moving frame acoustic holography, J. Acoust. Soc. Am. (USA), 110, 2326, 10.1121/1.1404976 R.J. Ruhala, C.B. Burroughs, Tire/pavement interaction noise source identification using multi-planar nearfield acoustical holography, in: SAE Technical Papers no. 724, 1999. Ruhala, 1999 H.-S. Kwon, J. S. Bolton, D. L. Hallman, Nearfield acoustical holography applied to sound radiation from tires, in: Proceedings - National Conference on Noise Control Engineering, 1998, pp. 103–108. S. Dumbacher, J. Blough, D. Hallman, P. Wang, “Source identification using acoustic array techniques,” in: SAE Technical Papers, 1995. K. Ginn, Tyre Noise Measurements Using Spatial Transformation of Sound Fields, in: Proceedings of the International Tire/Road Noise Conference 1990, Gothenberg, Sweden, August, 1990, 1990. W. Hendricx, F. Mancosu, Experimental Determination of the Noise Emitting Parts of a Rotating Tire in the European Research Project TINO, in: SAE Paper 1999-01-1732, Society of Automotive Engineers Noise and Vibration Conference Proceedings, Traverse City, MI, 1999. R.J. Ruhala, C.B. Burroughs, “Application of nearfield acoustical holography to tire/pavement interation noise emissions”, in: SAE Technical Papers, 1997. Ruhala, 1998, 109 B. Kim, T. Lee, “A Study on the Tire Noise,” in: Proceedings of Inter-Noise 2003, Seogwipo, Korea, 2003. J.-G. Ih, A. Oey, “Effect of patterns on wave propagation and sound radiation over the tire surface,” in: 41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012, 2012, vol. 2, pp. 1436–1441. Vercammen, 2015, Comparison of Two Measurement Methods for Exterior Noise Radiation Characterization of a Loaded Rotating Tyre Stijn Vercammen, SAE Technical Paper 2015–01-2197 Cho, 2008, Determination of the sound power levels emitted by various vehicles using a novel testing method, Appl. Acoust., 69, 185, 10.1016/j.apacoust.2006.08.012 Cho, 2008, Study to analyze the effects of vehicles and pavement surface types on noise, Appl. Acoust., 69, 833, 10.1016/j.apacoust.2007.04.006 Moir, 1974, Simple sound power measurements, Appl. Acoust., 7, 15, 10.1016/0003-682X(74)90003-6 ISO, “Acoustics – determination of sound power levels of noise source – engineering methods for free-field conditions over a reflecting plane,” no. 3744, 1981. Jacobsen, 1992, Sound power determination using the intensity tech- niques in the presence of diffuse background noise, J. Sound Vib., 159, 353, 10.1016/0022-460X(92)90041-U Fahy, 1997, International standards for the determination of sound power levels of sources using sound intensity measurement: An exposition, Appl. Acoust., 50, 97, 10.1016/S0003-682X(96)00043-6 ISO, “Acoustics – attenuation of sound during propagation outdoors – part 2: General method of calculation,” ISO 9613-2, 1996. Yang, 2011, Quantitative measurement of pass-by noise radiated by vehicles running at high speeds, J. Sound Vib., 330, 1352, 10.1016/j.jsv.2010.10.001 W. D. Fonseca, S. N. Y. Gerges, “Development of a low cost system for pass-by noise beamforming measurements,” in: 20th International Congress on Acoustics 2010, ICA 2010 - Incorporating Proceedings of the 2010 Annual Conference of the Australian Acoustical Society, 2010, vol. 3, pp. 2123–2129. P. A. G. Zavala, J. R. D. F. Arruda, F. G. Bueno, G. Miranda, W. Mothio, C. A. Adas, “Heavy vehicles pass-by noise beamforming using generalized inverse method and an optimized array,” in: SAE Technical Papers, 2013, vol. 13. Lustberg, 1993 T. Tanaka, “Identification Methods for Tire/Road Noise during Vehicle Operating Conditions with Acoustic Holography,” in: Proceedings of Inter-Noise 2004, Prague, Czech Republic, August, 2004. Poveda-Martinez, 2017, Acoustic directivity and detectability of electric powered two-wheelers, Acta Acustica united with Acustica, 103, 1014, 10.3813/AAA.919131 J. Maillard, J. Jagla, Auralization of non-stationary traffic noise using sample based synthesis - Comparison with pass-by recordings, in: 41st International Congress and Exposition on Noise Control Engineering 2012, INTER-NOISE 2012, 2012, vol. 1, pp. 608–619. Dutilleux, 2008, The revision of the French method for road traffic noise prediction, J. Acoust. Soc. Am., 123, 3150, 10.1121/1.2933163 Dutilleux, 2010, NMPB-routes-2008: The revision of the french method for road traffic noise prediction, Acta Acustica united with Acustica, 96, 452, 10.3813/AAA.918298 Salomons, 2010, Efficient numerical modeling of traffic noise, J. Acoust. Soc. Am., 127, 796, 10.1121/1.3273890 van Maercke, 2007, Development of an analytical model for outdoor sound propagation within the harmonoise project, Acta Acustica united with Acustica, 93, 201 Can, 2008, Capturing urban traffic noise dynamics through relevant descriptors, Appl. Acoust., 69, 1270, 10.1016/j.apacoust.2007.09.006 “EU Project ‘Quiet City Transport’ (QCITY), TIP4-CT-2005-516420 (2005-2009),” http://www.qcity.org. “EU Project “CityHush – Acoustically green road vehicles and city areas“, SPC8-GA-2009-233655 (2010-2012).,” http://www.cityhush.eu. Kleiner, 1993, Auralization-an overview, J.-Audio Eng. Soc., 41, 861 Funkhouser, 2004, A beam tracing method for interactive architectural acoustics, J. Acoustical Soc. Am., 115, 739, 10.1121/1.1641020 T. Funkhouser, I. Carlbom, G. Elko, G. Pingali, M. Sondhi, and J. West, “A beam tracing approach to acoustic modeling for interactive virtual environments,” in: Proceedings of the 25th annual conference on Computer graphics and interactive techniques, pp. 21–32, 1998. Laine, 2009, Accelerated beam tracing algorithm, Appl. Acoust., 70, 172, 10.1016/j.apacoust.2007.11.011 M. E. Nilsson, M. Rådsten-Ekman, J. Alvarsson, P. Lundén, J. Forssén, “Perceptual validation of auralized road traffic noise,” in: Proceedings of Inter-Noise 2011. Osaka, Japan: The Institute of Noise Control Engineering of Japan and the Acoustical Society of Japan, 2011. T. Kaczmarek, Road-vehicle simulation for psychoacoustic studies, in: ICA 2007, MADRID, Spain, 2007. J. Maillard, J. Martin, A simulation and restitution technique for the perceptive evaluation of road traffic noise,” in: Proc. Paris, France, EURONOISE 2008, 2008. J. Jagla, J. Maillard, N. Martin, “Sample-based engine noise synthesis using a harmonic synchronous overlap-and-add method,” in: Proc. of IEEE International Conference on Acoustics Speech and Signal Processing, 2012, pp. 373–376. J. Maillard, “Prediction and auralization of construction site noise,” in: Proc. Edinburgh, Scotland, EURONOISE 2009, October 26-28, 2009. R. Sottek, A. Fiebig, S. Guidati, P. Marla, B. Philippen, “Measuring and analyzing road traffic noise,” in: Proceedings - European Conference on Noise Control, 2012, pp. 1075–1082. Fiebig, 2012 Löfdahl, 2015, An auralization model for structure-borne tire noise, Appl. Acoust., 96, 61, 10.1016/j.apacoust.2015.03.011 Berckmans, 2010, Evaluation of substitution monopole models for tire noise sound synthesis, Mech. Syst. Sig. Process., 24, 240, 10.1016/j.ymssp.2009.06.005 Nykänen, 2008 W.F. Reiter Jr., A.C. Eberhardt, Truck tire vibration noise, in: SAE Technical Papers, 1974. P. R. Donovan, L. M. Pierce, D. M. Lodico, J. L. Rochat, H. S. Knauer, P. R. Donavan, Evaluating Pavement Strategies and Barriers for Noise Mitigation, p. 73p-, 2013. P.R. Donavan, The effects of porous pavements on tire/pavement noise source levels and pass-by measurements, in: Proceedings of Noise-Con 2011, Portland, OR, 2011. P.R. Donavan, Assessment of tire/pavement interaction noise under vehicle passby test conditions using sound intensity measurement methods, J. Acoust. Soc. Am. (USA) 103, 1998. U. Sandberg, “Noise emission influence of road surfaces, as measured with the statistical pass-by and close-proximity methods, using different vehicle classes and different tires,” in: Proc. of the Tyre/road Noise Seminar 1997 in Gdansk, Poland, 1997. H. Steven, D. Küppers, G.J. van Blokland, M.H. van Houten, R. van Loon, International validation test for the close proximity (CPX) method, 2000. S. Konishi, T. Fujino, K. Usami, N. Tomita, T. Ozaki, “Drum test method of tire road noise,” in: Conference of the Japanese Soc. of Automotive Engineers (JSAE) in Sapporo, Japan, 1996. T. Bravo, D. Ibarra, P. Cobo, D. Ibarra, “Extrapolation of maximum noise levels from near-field measurements to far-field positions,” in: American Society of Mechanical Engineers, Noise Control and Acoustics Division (Publication) NCAD, 2012, vol. 12, pp. 10337–10348. Anfosso-Ledee, 2004 Glowacz, 2018, Acoustic based fault diagnosis of three-phase induction motor, Appl. Acoust., 137, 82, 10.1016/j.apacoust.2018.03.010 Deptula, 2016, Decision Support System for Identifying Technical Condition of Combustion Engine, Arch. Acoustics, 41, 449, 10.1515/aoa-2016-0046 Glowacz, 2016, Fault Diagnostics of Acoustic Signals of Loaded Synchronous Motor Using Smofs-25-Expanded and Selected Classifiers, Tehnicki Vjesnik, 23, 1365 Fastl, 2007, Psychoacoustics: Facts and models, 10.1007/978-3-540-68888-4