Automated analysis of microstructural effects on the failure response of heterogeneous adhesives

Alfano, 2015, Global sensitivity analysis in the identification of cohesive models using full-field kinematic data, Int. J. Solids and Struct., 55, 66, 10.1016/j.ijsolstr.2014.06.006 Aragón, 2013, Effect of in-plane deformation on the cohesive failure of heterogeneous adhesives, J. Mech. Phys. Solids, 61, 1600, 10.1016/j.jmps.2013.03.003 Bhandari, 2007, 3D polycrystalline microstructure reconstruction from FIB generated serial sections for FE analysis, Comput. Mater. Sci., 41, 222, 10.1016/j.commatsci.2007.04.007 Bogdanovich, 1999, Three-dimensional finite element analysis of double-lap composite adhesive bonded joint using submodeling approach, Compos. Part B: Eng., 30, 537, 10.1016/S1359-8368(99)00026-8 Chaboche, 2001, Interface debonding models: a viscous regularization with a limited rate dependency, Int. J. Solids and Struct., 38, 3127, 10.1016/S0020-7683(00)00053-6 Chen, 2014, Special issue on multiscale modeling and simulation of physical phenomena of material systems, J. Nanomech. Micromech, 10.1061/(ASCE)NM.2153-5477.0000099 Daux, 2000, Arbitrary branch and intersecting cracks with the extended finite element method, Int. J. Numer. Methods in Eng., 48, 1741, 10.1002/1097-0207(20000830)48:12<1741::AID-NME956>3.0.CO;2-L De Borst, 2003, Numerical aspects of cohesive-zone models, Eng. Fract. Mech., 70, 1743, 10.1016/S0013-7944(03)00122-X Duarte, 2000, Generalized finite element methods for three-dimensional structural mechanics, Comput. Struct., 77, 215, 10.1016/S0045-7949(99)00211-4 Feder, 1980, Random sequential adsorption, J. Theor. Biol., 87, 237, 10.1016/0022-5193(80)90358-6 Feyel, 1999, Multiscale FE2 elastoviscoplastic analysis of composite structures, Comput. Mater. Sci., 16, 344, 10.1016/S0927-0256(99)00077-4 Feyel, 2003, A multilevel finite element method (FE2) to describe the response of highly non-linear structures using generalized continua, Comput. Methods in Appl. Mech. Eng., 192, 3233, 10.1016/S0045-7825(03)00348-7 Feyel, 2000, FE2 multiscale approach for modelling the elastoviscoplastic behaviour of long fibre SiC/Ti composite materials, Comput. Methods in Appl. Mech. Eng., 183, 309, 10.1016/S0045-7825(99)00224-8 Freed, 2008, A new cohesive zone model for mixed mode interface fracture in bimaterials, Eng. Fract. Mech., 75, 4583, 10.1016/j.engfracmech.2008.04.013 Fu, 2008, Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites, Compos. Part B: Eng., 39, 933, 10.1016/j.compositesb.2008.01.002 Gojny, 2005, Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites, Compos. Part A: Appl. Sci. Manuf., 36, 1525, 10.1016/j.compositesa.2005.02.007 Gustafson, 2009, The influence of adhesive constitutive parameters in cohesive zone finite element models of adhesively bonded joints, Int. J. Solids Struct., 46, 2201, 10.1016/j.ijsolstr.2008.11.016 Henkel Corporation, 2013. Structural Adhesives and nvh Selector GuideHenkel Corporation. Hesebeck, 2007, Modeling of flexible adhesive joints in automotive crash simulations: Calibration and application of cohesive elements Hill, 1985, On the micro-to-macro transition in constitutive analyses of elastoplastic response at finite strain, vol. 98, 579 Hirschberger, 2009, Computational multiscale modelling of heterogeneous material layers, Eng. Fract. Mech., 76, 793, 10.1016/j.engfracmech.2008.10.018 Hirschberger, 2008, Computational homogenization of material layers with micromorphic mesostructure, Philos. Mag., 88, 3603, 10.1080/14786430802502567 Hsieh, 2010, The mechanisms and mechanics of the toughening of epoxy polymers modified with silica nanoparticles, Polymer, 51, 6284, 10.1016/j.polymer.2010.10.048 Imanaka, 2001, Fracture toughness of spherical silica-filled epoxy adhesives, Int. J. Adhes. Adhes., 21, 389, 10.1016/S0143-7496(01)00016-1 Izrailev, 1997, Molecular dynamics study of unbinding of the avidin-biotin complex, Biophys. J., 72, 1568, 10.1016/S0006-3495(97)78804-0 Kanouté, 2009, Multiscale methods for composites: a review, Arch. Comput. Methods in Eng., 16, 31, 10.1007/s11831-008-9028-8 Kari, 2007, Numerical evaluation of effective material properties of randomly distributed short cylindrical fibre composites, Comput. Mater. Sci., 39, 198, 10.1016/j.commatsci.2006.02.024 Kawaguchi, 2003, The effect of particle–matrix adhesion on the mechanical behavior of glass filled epoxies: Part 1. A study on yield behavior and cohesive strength, Polymer, 44, 4229, 10.1016/S0032-3861(03)00371-9 Kawaguchi, 2003, The effect of particle–matrix adhesion on the mechanical behavior of glass filled epoxies: Part 2. A study on fracture toughness, Polymer, 44, 4239, 10.1016/S0032-3861(03)00372-0 Khoramishad, 2010, Predicting fatigue damage in adhesively bonded joints using a cohesive zone model, Int. J. Fatigue, 32, 1146, 10.1016/j.ijfatigue.2009.12.013 Korta, 2015, Experimental and numerical study on the effect of humidity-temperature cycling on structural multi-material adhesive joints, Compos. Part B: Eng, 10.1016/j.compositesb.2015.05.020 Kulkarni, 2010, Coupled multi-scale cohesive modeling of failure in heterogeneous adhesives, Int. J. Numer. Methods in Eng., 84, 916, 10.1002/nme.2923 Liu, 2011, Recent advances and emerging applications of the boundary element method, Appl. Mech. Rev., 64, 030802, 10.1115/1.4005491 Markatos, 2013, The effects of manufacturing-induced and in-service related bonding quality reduction on the mode-I fracture toughness of composite bonded joints for aeronautical use, Compos. Part B: Eng., 45, 556, 10.1016/j.compositesb.2012.05.052 Marques, 2015, Testing and simulation of mixed adhesive joints for aerospace applications, Compos. Part B: Eng., 74, 123, 10.1016/j.compositesb.2015.01.005 Matouš, 2008, Multiscale cohesive failure modeling of heterogeneous adhesives, J. Mech. Phys. Solids, 56, 1511, 10.1016/j.jmps.2007.08.005 May, 2010, Effects of the addition of inorganic nanoparticles on the adhesive strength of a hybrid sol–gel epoxy system, Int. J. Adhes. Adhes., 30, 505, 10.1016/j.ijadhadh.2010.05.002 Melenk, 1996, The partition of unity finite element method: Basic theory and applications, Comput. Methods in Appl. Mech. Eng., 139, 289, 10.1016/S0045-7825(96)01087-0 Miehe, 2002, Homogenization of inelastic solid materials at finite strains based on incremental minimization principles. Application to the texture analysis of polycrystals, J. Mech. Phys. Solids, 50, 2123, 10.1016/S0022-5096(02)00016-9 Miehe, 1999, Computational homogenization analysis in finite plasticity simulation of texture development in polycrystalline materials, Comput. Methods in Appl. Mech. Eng., 171, 387, 10.1016/S0045-7825(98)00218-7 Mosby, 2014, Hierarchically parallel coupled finite strain multiscale solver for modeling heterogeneous layers, Int. J. Numer. Methods in Eng. Needleman, 1992, Micromechanical modelling of interfacial decohesion, Ultramicroscopy, 40, 203, 10.1016/0304-3991(92)90117-3 Oden, 1998, A new cloud-based hp finite element method, Comput. Methods in Appl. Mech. Eng., 153, 117, 10.1016/S0045-7825(97)00039-X Ortiz, 1999, Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis, Int. J. Numer. Methods in Eng., 44, 1267, 10.1002/(SICI)1097-0207(19990330)44:9<1267::AID-NME486>3.0.CO;2-7 Pan, 2008, Numerical generation of a random chopped fiber composite RVE and its elastic properties, Compos. Sci. Technol., 68, 2792, 10.1016/j.compscitech.2008.06.007 Park, 2011, Cohesive zone models: a critical review of traction-separation relationships across fracture surfaces, Appl. Mech. Rev., 64, 060802, 10.1115/1.4023110 Piegl, 1987, Curve and surface constructions using rational b-splines, Comput. Aided Des., 19, 485, 10.1016/0010-4485(87)90234-X Popelar, 1997, Multiaxial nonlinear viscoelastic characterization and modeling of a structural adhesive, J. Eng. Mater. Technol., 119, 205, 10.1115/1.2812245 Reinoso, 2012, Experimental and three-dimensional global-local finite element analysis of a composite component including degradation process at the interfaces, Compos. Part B: Eng., 43, 1929, 10.1016/j.compositesb.2012.02.010 Renard, 1987, Etude de l’initiation de l’endommagement dans la matrice d’un matériau composite par une méthode d’homogénéisation, La Recherche aérospatiale, 43 Sørensen, 2002, Cohesive law and notch sensitivity of adhesive joints, Acta Materialia, 50, 1053, 10.1016/S1359-6454(01)00404-9 Sarathi, 2007, Understanding the thermal, mechanical and electrical properties of epoxy nanocomposites, Mater. Sci. Eng.: A, 445, 567, 10.1016/j.msea.2006.09.077 Sharland, 1987, A review of the theoretical modelling of crevice and pitting corrosion, Corros. Sci., 27, 289, 10.1016/0010-938X(87)90024-2 Soghrati, 2014, Hierarchical interface-enriched finite element method: an automated technique for mesh-independent simulations, J. Comput. Phys., 275, 41, 10.1016/j.jcp.2014.06.016 Soghrati, 2015, On the application of higher-order elements in the hierarchical interface-enriched finite element method, Int. J. Numer. Methods in Eng Soghrati, 2015, An adaptive interface-enriched generalized FEM for the treatment of problems with curved interfaces, Int. J. Numer. Methods in Eng, 10.1002/nme.4860 Soghrati, S., Duarte, C. A., Geubelle, P. H., In press. An adaptive interface-enriched generalized finite element method for the treatment of problems with curved interfaces. Int. J. Numer. Methods in Eng. Soghrati, 2012, A 3D interface-enriched generalized finite element method for weakly discontinuous problems with complex internal geometries, Comput. Methods in Appl. Mech. Eng., 217-220, 46, 10.1016/j.cma.2011.12.010 Spring, 2014, A growing library of three-dimensional cohesive elements for use in ABAQUS, Eng. Fract. Mech., 126, 190, 10.1016/j.engfracmech.2014.04.004 Sukumar, 2000, Extended finite element method for three-dimensional crack modeling, Int. J. Numer. Methods in Eng., 48, 1549, 10.1002/1097-0207(20000820)48:11<1549::AID-NME955>3.0.CO;2-A Terada, 2001, A class of general algorithms for multi-scale analyses of heterogeneous media, Comput. Methods in Appl. Mech. Eng., 190, 5427, 10.1016/S0045-7825(01)00179-7 Tsige, 2004, Effect of cross-linker functionality on the adhesion of highly cross-linked polymer networks: a molecular dynamics study of epoxies, Macromolecules, 37, 630, 10.1021/ma034970t Wang, 2013, Large-scale thermal analysis of fiber composites using a line-inclusion model by the fast boundary element method, Eng. Anal. Bound. Elem., 37, 319, 10.1016/j.enganabound.2012.11.007 Xu, 1993, Void nucleation by inclusion debonding in a crystal matrix, Model. Simul. Mater. Sci. Eng., 1, 111, 10.1088/0965-0393/1/2/001 Yang, 2012, Modeling of high strength steel joints bonded with toughened adhesive for vehicle crash simulations, Int. J. Adhes. Adhes., 39, 21, 10.1016/j.ijadhadh.2012.06.007 Zhai, 2008, Effect of nano-Al2O3 on adhesion strength of epoxy adhesive and steel, Int. J. Adhes. Adhes., 28, 23, 10.1016/j.ijadhadh.2007.03.005