Experimental investigations on a diesel engine operated with fuel blends derived from a mixture of Pakistani waste tyre oil and waste soybean oil biodiesel

Agrawal AK (2007) Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines. Energy Combust Sci 33:233–271 Alsaleh A, Sattler ML (2014) Waste tire pyrolysis: influential parameters and product properties. Curr Sustainable Renewable Energy Rep 1:129–135 Cunha A Jr, Feddern V, De Prá MC, Higarashi MM, De Abreu PG, Coldebella A (2013) Fuel 105:228–234 Benallal B, Roy C, Pakdel H, Chabot S, Poirier MA (1995) Characterization of pyrolytic light naphtha from vacuum pyrolysis of used tyres comparison with petroleum naphtha. Fuel 74(11):1589–1594 Bhatt PM, Patel PD (2012a) Suitability of tyre pyrolysis oil (TPO) as an alternative fuel for internal combustion engine. Int J Adv Eng Res Stud 4:61–65 Bhatt PM, Patel PD (2012b) Suitability of tyre pyrolysis oil (TPO) as an alternative fuel for internal combustion engine. IJAERS 4:61–65 Chang DYZ, Gerpen JH, Lee I, Johnson LA, Hammond EG, Marley SJ (1996) Fuel properties and emissions of soybean oil esters as diesel fuel. J Am Oil Chem Soc 73:1549–1555 Danesan V. 2007. International combustion engine, 3rd ed. McGraw-Hill Dogan Q, Celik MB, Ozdalyan B (2012) The effect of tyre derived fuel/diesel fuel blends utilization on diesel engine performance and emissions. Fuel 95:340–346 Dung NA, Klaewkla R, Wongkasemjit S, Jitkarnka S (2009a) Light olefins and light oil production from catalytic pyrolysis of waste tyre. J Anal Appl Pyrolysis 86:281–286 Dung NA, Mhodmonthin A, Wongkasemjit S, Jitkarnka S (2009b) Effects of ITQ-21 and ITQ-24 as zeolite additives on the oil products obtained from the catalytic pyrolysis of waste tyre. J Anal Appl Pyrolysis 85:338–344 Dung NA, Tanglumlert W, Wongkasemjit S, Jitkarnka S (2010) Roles of ruthenium on catalytic pyrolysis of waste tyre and the changes of its activity upon the rate of calcinations. J Anal Appl Pyrolysis 87:256–262 Dung NA, Wongkasemjit S, Jitkarnka S (2009c) Effects of pyrolysis temperature and Pt-loaded catalysts on polar-aromatic content in tyrederived oil. Appl Catal B Environ 91:300–307 Edwin Raj R, Robert Kennedy Z, Pillai BC (2013) Optimization of process parameters in flash pyrolysis of waste tyres to liquid and gaseous fuel in a fluidized bed reactor. Energy Convers Manag 67:145–151 Ganesan, V. (2007). An analysis of working capital management efficiency in telecommunication equipment. Industryrivier Academic Journal, 3:2, Fall Hariharan S, Murugan S, Nagarajan G (2013) Effect of diethyl ether on tyre pyrolysis oil fueled diesel engine. Fuel 104:109–115 Islam MR, Haniu H, Beg Alam MR (2008) Liquid fuels and chemicals from pyrolysis of motorcycle tyre waste product yields, compositions and related properties. Fuel 87:3112–3122 Kalitko VA (2010) Steam thermolysis of tyre shreds: modernization in afterburning of accompanying gas with waste steam. J Eng Phys Thermo Phys 83:179–187 Kaminsky W, Mennerich C (2001) Pyrolysis of synthetic tyre rubber in a fluidised-bed reactor to yield 1,3-butadiene, styrene and carbon black. J Anal Appl Pyrolysis 59:803–811 Kaminsky W, Mennerich C, Zhang Z (2009) Feedstock recycling of synthetic and natural rubber by pyrolysis in a fluidized bed. J Anal Appl Pyrolysis l85:334–337 Kapura T, Muruganb S, Patelc SK (2014) Experimental study of diethyl ether addition on the performance and emissions of a diesel engine. Energy Procedia. 54:615–626 Lapuerta M, Armas O, Ballesteros R, Fernández J (2005) Diesel emissions from biofuels derived from Spanish potential vegetable oils. Fuel 84(6):773–780 Lapuerta M, Hernández JJ, Ballesteros R, Durán A (2003) Composition and size of diesel particulate emissions from a commercial European engine tested with present and future fuels. Proc Inst Mech Eng, Part D: J Automobile Eng 217:907–919 Laresgoiti MF, Caballero BM, de Marco I, Torres A, Cabrero MA, Chomón MJ (2004) Characterization of the liquid products obtained in tyre pyrolysis. J Anal Appl Pyrolysis 71:917–934 Li L, Wang J, Wang Z, Xiao J (2015) Combustion and emission characteristics of diesel engine fueled with diesel/biodiesel/pentanol fuel blends. Fuel 15(6):211–218 Lopez G, Olazar M, Aguado R, Elordi G, Amutio M, Artetxe M, Bilbao J (2010) Vacuum pyrolysis of waste tyres by continuously feeding into a conical spouted bed reactor. Ind Eng Chem Res 49:8990–8997 Islam M, Khan N.M.F.R, Alam MZ. 2003. Production and characterization of scrap tyre pyrolysis oil and its blend. International conference on mechanical engineering 26–28 December 2003, Dhaka, Bangladesh Martínez JD, Puy N, Murillo R, García T, Navarro MV, Mastral AM (2013) Waste tire pyrolysis—a review. Renew Sust Energ Rev 23:179–213 Mastral AM, Murillo R, Callén MS, García T, Snape CE (2000) Influence of process variables on oils from tire pyrolysis and hydropyrolysis in a swept fixed bed reactor. Energy Fuel 14:739–744 Maurizio C, Sonia C, Silvia C (2014) A pilot-scale study of waste vegetable oil transesterification with alkaline and acidic catalysts. Energy Procedia 45:198–206 Murillo R, Aylón E, Navarro MV, Callén MS, Aranda A, Mastral AM (2006) The application of thermal processes to valorise waste tyre. Fuel Process Technol 87:143–147 Murugan S, Ramaswamy MC, Nagarajan G (2008) Performance, emission and combustion studies of a DI diesel engine using distilled tyre pyrolysis oil-diesel blends. Fuel Process Technol 89:152–159 Naima K, Liazid A (2013) Waste oils as alternative fuel for diesel engine: a review. J PetroleumTechnol Altern Fuels 4(3):30–43 Nabanita B, Ritica R, Tushar J (2014) Biodiesel production from used vegetable oil collected from shops selling fritters in Kolkata. Energy Procedia 54:161–165 Nantha GK, Arindam P, Sharma S, Charan Samanchi K, Elango ST (2014) Investigation of emissions and combustion characteristics of a CI engine fueled with waste cooking oil methyl ester and diesel blends. Alexandria Eng J 53:281–287 Pakdel H, Pantea DM, Roy C (2001) Production of dl-limonene by vacuum pyrolysis of used tyres. J Anal Appl Pyrolysis 57:91–107 Qasim M., Ansari T. M., and Mazhar Hussain. 2017. Preparation, characterization and engine performance of biodiesel fuel derived from waste cooking oil and its blends. Inter J Sci, 6(4): 113–118. http://www.ijsciences.com/pub/issue/2017-04/ Rodriguez IM, Laresgoiti MF, Cabrero MA, Torres A, Chomon MJ, Caballero B (2001) Pyrolysis of scrap tyres. Fuel Process Technol 72:9–22 Ramadhas AS, Jayaraj S, Muraleedharan C (2005) Characterization and effect of using rubber seed oil as fuel in compression ignition engines. Renew Energ. 30:795–803 Ramadhas AS, Jayaraj S, Muraleedharan C (2004) Use of vegetable oils as I.C. engine fuels—a review. Renew Energ 29:727–742 Rombaldo CFS, Lisbôa ACL, Méndez MOA, Reis Coutinho A (2008) Effect of operating conditions on scrap tyre pyrolysis. Mater Res 11:359–363 Unapumnuk K, Keener TC, Lu M, Liang F (2008) Investigation into the removal of sulfur from tyre derived fuel by pyrolysis. Fuel 87:951–956 Unapumnuk K, Lu M, Keener TC (2006) Carbon distribution from the pyrolysis of tyre-derived fuels. Ind Eng Chem Res 45:8757–8764 US Environmental Protection Agency 2014. Wastes–resource conservation—common wastes and materials—scrap tires: basic introduction. http://www.epa.gov/wastes/conserve/materials/tires/basic.htm. Retrieved on January 8, 2017 Wanodya AK, Arief B (2013) Synthesis of biodiesel from second-used cooking oil International conference on Sustainable Energy Engineering and Application. Energy Procedia 32:190–199 Williams PT, Besler S, Taylor DT (1990) The pyrolysis of scrap automotive tyres: the influence of temperature and heating rate on product composition. Fuel 69:1474–1482 Williams PT (2013) Pyrolysis of waste tyres: a review. Waste Manag 33(8):1714–1728 Witpathomwong C, Longloilert R, Wongkasemjit S, Jitkarnka S (2011) Improving light olefins and light oil production using Ru/MCM-48 in catalytic pyrolysis of waste Tyre. Energy Procedia 9:245–251 Wongkhorsub C, Chindaprasert N (2013) A comparison of the use of pyrolysis oils in diesel engine. Energy Power Eng 5(04):350–357 Yoon SH, Cha PJ, Lee CS (2010) An investigation of the effects of spray angle and injection strategy on dimethyl ether (DME) combustion and exhaust emission characteristics in a common-rail diesel engine. Fuel Process Technol 91(11):1364–1372 Zhang X, Wang T, Ma TL, Chang J (2008) Vacuum pyrolysis of waste tyres with basic additive. Waste Manag 28:2301–2310