Universal approach to predicting two-phase frictional pressure drop for mini/micro-channel saturated flow boiling

Mudawar, 2011, Two-phase micro-channel heat sinks: theory, applications and limitations, J. Electron. Packag. Trans. ASME, 133, 10.1115/1.4005300 Anderson, 1989, Microelectronic cooling by enhanced pool boiling of a dielectric fluorocarbon liquid, J. Heat Transfer Trans. ASME, 111, 752, 10.1115/1.3250747 Mudawar, 1996, Optimizing and predicting CHF in spray cooling of a square surface, J. Heat Transfer Trans. ASME, 118, 672, 10.1115/1.2822685 Lin, 2003, Heat transfer characteristics of spray cooling in a closed loop, Int. J. Heat Mass Transfer, 46, 3737, 10.1016/S0017-9310(03)00217-5 Rybicki, 2006, Single-phase and two-phase cooling characteristics of upward-facing and downward-facing sprays, Int. J. Heat Mass Transfer, 49, 5, 10.1016/j.ijheatmasstransfer.2005.07.040 Katto, 1973, Study of the mechanism of burn-out in boiling system of high burn-out heat flux, Bull. JSME, 16, 1357, 10.1299/jsme1958.16.1357 Mudawar, 1991, Critical heat flux from a simulated electronic chip to a confined rectangular impinging jet of dielectric liquid, Int. J. Heat Mass Transfer, 34, 1465, 10.1016/0017-9310(91)90289-Q Wadsworth, 1992, Enhancement of single-phase heat transfer and critical heat flux from an ultra-high-flux simulated microelectronic heat source to a rectangular impinging jet of dielectric liquid, J. Heat Transfer Trans. ASME, 114, 764, 10.1115/1.2911348 Johns, 1996, An ultra-high power two-phase jet-impingement avionic clamshell module, J. Electron. Packag. Trans. ASME, 118, 264, 10.1115/1.2792162 Willingham, 1992, Forced-convection boiling and critical heat flux from a linear array of discrete heat sources, Int. J. Heat Mass Transfer, 35, 2879, 10.1016/0017-9310(92)90308-F Bowers, 1994, High flux boiling in low flow rate, low pressure drop mini-channel and micro-channel heat sinks, Int. J. Heat Mass Transfer, 37, 321, 10.1016/0017-9310(94)90103-1 Tran, 1996, Small circular- and rectangular-channel boiling with two refrigerants, Int. J. Multiphase Flow, 22, 485, 10.1016/0301-9322(96)00002-X Lee, 2001, Heat transfer correlation for boiling flows in small rectangular horizontal channels with low aspect ratios, Int. J. Multiphase Flow, 27, 2043, 10.1016/S0301-9322(01)00054-4 Khanikar, 2009, Effects of carbon nanotube coating on flow boiling in a micro-channel, Int. J. Heat Mass Transfer, 52, 3805, 10.1016/j.ijheatmasstransfer.2009.02.007 Kim, 2012, Flow condensation in parallel micro-channels – Part 1: Experimental results and assessment of pressure drop correlations, Int. J. Heat Mass Transfer, 55, 971, 10.1016/j.ijheatmasstransfer.2011.10.013 Qu, 2004, Transport phenomena in two-phase micro-channel heat sinks, J. Electron. Packag. Trans. ASME, 126, 213, 10.1115/1.1756145 Lee, 2005, Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part II – heat transfer characteristics, Int. J. Heat Mass Transfer, 48, 941, 10.1016/j.ijheatmasstransfer.2004.09.019 A.M. Lezzi, A. Niro, G.P. Beretta, Experimental data on CHF for forced convection water boiling in long horizontal capillary tubes, in: Proceedings of the Tenth International Heat Transfer Conference, UK, 7, 1994, pp. 491–496. T.N. Tran, Pressure drop and heat transfer study of two-phase flow in small channels, Ph.D thesis, Texas Tech University, TX, 1998. J. Pettersen, Flow vaporization of CO2 in microchannel tubes, Ph.D Thesis, Norwegian University of Science and Technology, Norway, 2002. C.A. Monroe, T.A. Newell, J.C. Chato, An experimental investigation of pressure drop and heat transfer in internally enhanced aluminum microchannels, Report No. ACRC TR-213, Air Conditioning and Refrigeration Center, University of Illinois at Urbana-Champaign, 2003. Qu, 2003, Measurement and prediction of pressure drop in two-phase micro-channel heat sinks, Int. J. Heat Mass Transfer, 46, 2737, 10.1016/S0017-9310(03)00044-9 X. Huo, Experimental study of flow boiling heat transfer in small diameter tubes, Ph.D thesis, London South Bank University, UK, 2005. Lee, 2005, Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part I – pressure drop characteristics, Int. J. Heat Mass Transfer, 48, 928, 10.1016/j.ijheatmasstransfer.2004.09.018 W. Owhaib, C. Martín-Callizo, B. Palm, Two-phase flow pressure drop of R-134A in a vertical circular mini/micro channel, in: ASME Sixth International Conference on Nanochannels, Microchannels, and Minichannels, Germany, ICNMM2008-62243, 2008, pp. 343–353. Hu, 2009, Pressure drop during horizontal flow boiling of R410A/oil mixture in 5mm and 3mm smooth tubes, Appl. Therm. Eng., 29, 3353, 10.1016/j.applthermaleng.2009.05.011 Quibén, 2009, Flow boiling in horizontal flattened tubes: Part I – two-phase frictional pressure drop results and model, Int. J. Heat Mass Transfer, 52, 3634, 10.1016/j.ijheatmasstransfer.2008.12.032 M. Ducoulombier, Ebullition convective du dioxyde de carbone - étude expérimentale en micro-canal, Ph.D thesis, Institut National des Sciences Appliquées (INSA) de Lyon, France, 2010. Tibiriçá, 2011, Two-phase frictional pressure drop and flow boiling heat transfer for R245fa in a 2.32-mm tube, Heat Transfer Eng., 32, 1139, 10.1080/01457632.2011.562725 Tibiriçá, 2011, Experimental investigation of flow boiling pressure drop of R134A in a microscale horizontal smooth tube, J. Therm. Sci. Eng. Appl. Trans. ASME, 3, 011006, 10.1115/1.4003728 Wu, 2011, Investigation of heat transfer and pressure drop of CO2 two-phase flow in a horizontal minichannel, Int. J. Heat Mass Transfer, 54, 2154, 10.1016/j.ijheatmasstransfer.2010.12.009 Kharangate, 2012, Experimental and theoretical study of critical heat flux in vertical upflow with inlet vapor void, Int. J. Heat Mass Transfer, 55, 360, 10.1016/j.ijheatmasstransfer.2011.09.028 Maqbool, 2012, Flow boiling of ammonia in vertical small diameter tubes: two phase frictional pressure drop results and assessment of prediction methods, Int. J. Therm. Sci., 54, 1, 10.1016/j.ijthermalsci.2011.11.018 McAdams, 1942, Vaporization inside horizontal tubes, II. Benzene–oil mixture, Trans. ASME, 64, 193 Akers, 1958, Condensing heat transfer within horizontal tubes, Chem. Eng. Prog., 54, 89 Cicchitti, 1960, Two-phase cooling experiments-pressure drop, heat transfer and burnout measurements, Energia nucleare, 7, 407 W.L. Owens, Two-phase pressure gradient. in: Int. Dev. Heat Transfer, Pt. II., ASME, New York, 1961. Dukler, 1964, Pressure drop and hold up in two-phase flow, AIChE J., 10, 38, 10.1002/aic.690100117 Beattie, 1982, A simple two-phase frictional pressure drop calculation method, Int. J. Multiphase Flow, 8, 83, 10.1016/0301-9322(82)90009-X Lin, 1991, Local frictional pressure drop during vaporization of R-12 through capillary tubes, Int. J. Multiphase Flow, 17, 95, 10.1016/0301-9322(91)90072-B Lockhart, 1949, Proposed correlation of data for isothermal two-phase, two-component flow in pipes, Chem. Eng. Prog., 45, 39 L. Friedel, Improved friction pressure drop correlations for horizontal and vertical two-phase pipe flow, in: European Two-phase Group Meeting, Ispra, Italy, 1979, Paper E2. Müller-Steinhagen, 1986, A simple friction pressure drop correlation for two-phase flow in pipes, Chem. Eng. Process., 20, 297, 10.1016/0255-2701(86)80008-3 Jung, 1989, Prediction of pressure drop during horizontal annular flow boiling of pure and mixed refrigerants, Int. J. Heat Mass Transfer, 32, 2435, 10.1016/0017-9310(89)90203-2 Wang, 1997, Visual observation of two-phase flow pattern of R-22, R-134a, and R-407C in a 6.5-mm smooth tube, Exp. Therm. Fluid Sci., 15, 395, 10.1016/S0894-1777(97)00007-1 Mishima, 1996, Some characteristics of air–water two-phase flow in small diameter vertical tubes, Int. J. Multiphase Flow, 22, 703, 10.1016/0301-9322(96)00010-9 Yang, 1996, Friction pressure drop of R-12 in small hydraulic diameter extruded aluminum tubes with and without micro-fins, Int. J. Heat Mass Transfer, 39, 801, 10.1016/0017-9310(95)00151-4 Yan, 1998, Evaporation heat transfer and pressure drop of refrigerant R-134a in a small pipe, Int. J. Heat Mass Transfer, 41, 4183, 10.1016/S0017-9310(98)00127-6 Tran, 2000, Two-phase pressure drop of refrigerants during flow boiling in small channels: an experimental investigation and correlation development, Int. J. Multiphase Flow, 26, 1739, 10.1016/S0301-9322(99)00119-6 Chen, 2001, Two-phase pressure drop of air–water and R-410A in small horizontal tubes, Int. J. Multiphase Flow, 27, 1293, 10.1016/S0301-9322(01)00004-0 Lee, 2001, Pressure drop correlations for two-phase flow within horizontal rectangular channels with small heights, Int. J. Multiphase Flow, 27, 783, 10.1016/S0301-9322(00)00050-1 Yu, 2002, Two-phase pressure drop, boiling heat transfer, and critical heat flux to water in a small-diameter horizontal tube, Int. J. Multiphase Flow, 28, 927, 10.1016/S0301-9322(02)00019-8 Hwang, 2006, The pressure drop in microtubes and the correlation development, Int. J. Heat Mass Transfer, 49, 1804, 10.1016/j.ijheatmasstransfer.2005.10.040 Sun, 2009, Evaluation analysis of prediction methods for two-phase flow pressure drop in mini-channels, Int. J. Multiphase Flow, 35, 47, 10.1016/j.ijmultiphaseflow.2008.08.003 Li, 2010, A general correlation for adiabatic two-phase pressure drop in micro/mini-channels, Int. J. Heat Mass Transfer, 53, 2732, 10.1016/j.ijheatmasstransfer.2010.02.029 Zhang, 2010, Correlations of two-phase frictional pressure drop and void fraction in mini-channel, Int. J. Heat Mass Transfer, 53, 453, 10.1016/j.ijheatmasstransfer.2009.09.011 Li, 2011, Generalized adiabatic pressure drop correlations in evaporative micro/mini-channels, Exp. Therm. Fluid Sci., 35, 866, 10.1016/j.expthermflusci.2010.07.005 Mudawar, 1997, An analytical model for near-saturated pool boiling CHF on vertical surfaces, Int. J. Heat Mass Transfer, 40, 2327, 10.1016/S0017-9310(96)00298-0 Howard, 1999, Orientation effects on pool boiling CHF and modeling of CHF for near-vertical surfaces, Int. J. Heat Mass Transfer, 42, 1665, 10.1016/S0017-9310(98)00233-6 Galloway, 1993, CHF mechanism in flow boiling from a short heated wall – Part 1. Examination of near-wall conditions with the aid of photomicrography and high-speed video imaging, Int. J. Heat Mass Transfer, 36, 2511, 10.1016/S0017-9310(05)80190-5 Galloway, 1993, CHF mechanism in flow boiling from a short heated wall – Part 2. Theoretical CHF model, Int. J. Heat Mass Transfer, 36, 2527, 10.1016/S0017-9310(05)80191-7 Cersey, 1995, Effects of heater length and orientation on the trigger mechanism for near-saturated flow boiling critical heat flux – I. Photographic study and statistical characterization of the near-wall interfacial features, Int. J. Heat Mass Transfer, 38, 629, 10.1016/0017-9310(94)00193-Y Cersey, 1995, Effects of heater length and orientation on the trigger mechanism for near-saturated flow boiling critical heat flux – II. Critical heat flux model, Int. J. Heat Mass Transfer, 38, 643, 10.1016/0017-9310(94)00194-Z Sturgis, 1999, Critical heat flux in a long, rectangular channel subjected to onesided heating – I. Flow visualization, Int. J. Heat Mass Transfer, 42, 1835, 10.1016/S0017-9310(98)00274-9 Sturgis, 1999, Critical heat flux in a long, rectangular channel subjected to onesided heating – II. Analysis of critical heat flux data, Int. J. Heat Mass Transfer, 42, 1849, 10.1016/S0017-9310(98)00275-0 Kim, 2012, Theoretical model for annular flow condensation in rectangular micro-channels, Int. J. Heat Mass Transfer, 55, 958, 10.1016/j.ijheatmasstransfer.2011.10.014 Mudawar, 1999, Ultra-high critical heat flux (CHF) for subcooled water flow boiling – I. CHF data and parametric effects for small diameter tubes, Int. J. Heat Mass Transfer, 42, 1405, 10.1016/S0017-9310(98)00241-5 Hall, 1999, Ultra-high critical heat flux (CHF) for subcooled water flow boiling – II. High-CHF database and design parameters, Int. J. Heat Mass Transfer, 42, 1429, 10.1016/S0017-9310(98)00242-7 Hall, 2000, Critical heat flux (CHF) for water flow in tubes – I. Compilation and assessment of world CHF data, Int. J. Heat Mass Transfer, 43, 2573, 10.1016/S0017-9310(99)00191-X Hall, 2000, Critical heat flux (CHF) for water flow in tubes – II. Subcooled CHF correlations, Int. J. Heat Mass Transfer, 43, 2605, 10.1016/S0017-9310(99)00192-1 Kim, 2012, Universal approach to predicting two-phase frictional pressure drop for adiabatic and condensing mini/micro-channel flows, Int. J. Heat Mass Transfer, 55, 3246, 10.1016/j.ijheatmasstransfer.2012.02.047 Zivi, 1964, Estimation of steady-state steam void-fraction by means of the principle of minimum entropy production, J. Heat Transfer Trans. ASME, 86, 247, 10.1115/1.3687113 Incropera, 2002 Shah, 1978 Rouhani, 1970, Calculation of void volume fraction in the subcooled and quality boiling region, Int. J. Heat Mass Transfer, 13, 393, 10.1016/0017-9310(70)90114-6 Woldesemayat, 2007, Comparison of void fraction correlations for different flow patterns in horizontal and upward inclined pipes, Int. J. Multiphase Flow, 33, 347, 10.1016/j.ijmultiphaseflow.2006.09.004 E.W. Lemmon, M.L. Huber, M.O. McLinden, Reference fluid thermodynamic and transport properties – REFPROP Version 8.0, NIST, MD, 2007. Baroczy, 1965, Correlation of liquid fraction in two-phase flow with applications to liquid metals, Chem. Eng. Prog., 61, 179 Kim, 2012, Flow condensation in parallel micro-channels – Part 2: Heat transfer results and correlation technique, Int. J. Heat Mass Transfer, 55, 984, 10.1016/j.ijheatmasstransfer.2011.10.012 Shmerler, 1988, Local heat transfer coefficient in wavy free-falling turbulent liquid films undergoing uniform sensible heating, Int. J. Heat Mass Transfer, 31, 67, 10.1016/0017-9310(88)90223-2 Shmerler, 1988, Local evaporative heat transfer coefficient in turbulent free-falling liquid films, Int. J. Heat Mass Transfer, 31, 731, 10.1016/0017-9310(88)90131-7 Lyu, 1991, Statistical investigation of the relationship between interfacial waviness and sensible heat transfer to a falling liquid film, Int. J. Heat Mass Transfer, 34, 1451, 10.1016/0017-9310(91)90288-P Lyu, 1991, Determination of wave-induced fluctuations of wall temperature and convective heat transfer coefficient in the heating of a turbulent falling liquid film, Int. J. Heat Mass Transfer, 34, 2521, 10.1016/0017-9310(91)90093-T Mudawar, 1993, Mass and momentum transport in falling liquid films laminarized at relatively high Reynolds numbers, Int. J. Heat Mass Transfer, 36, 3437, 10.1016/0017-9310(93)90162-Y Mudawar, 1993, Measurement of mass and momentum transport in wavy-laminar falling liquid films, Int. J. Heat Mass Transfer, 36, 4151, 10.1016/0017-9310(93)90077-J Mudawar, 1986, Momentum and heat transfer across freely-falling turbulent liquid films, Int. J. Multiphase Flow, 12, 771, 10.1016/0301-9322(86)90051-0 Koskie, 1989, Parallel-wire probes for measurement of thick liquid films, Int. J. Multiphase Flow, 15, 521, 10.1016/0301-9322(89)90051-7