An axisymmetric model of acetabular components in total hip arthroplasty

Amstutz, 1978, THARIES surface replacements: a review of the first 100 cases, Clin. Orthop., 134, 87 Andriacchi, 1976, A stress analysis of the femoral stem in total hip prostheses, J. Bone Jt Surg., 58-A, 618, 10.2106/00004623-197658050-00006 Beckenbaugh, 1978, Total hip arthroplasty, J. Bone Jt Surg., 60-A, 306, 10.2106/00004623-197860030-00005 Brand, 1981, Architecture of the periacetabular trabecular bone, Orthopaedics Carter, 1981, Mechanics of the acetabulum Crowninshield, 1980, An analysis of femoral component stem design in total hip arthroplasty, J. Bone Jt Surg., 62-A, 68, 10.2106/00004623-198062010-00011 Crowninshield, 1978, A biomechanical investigation of the human hip, J. Biomechanics, 11, 75, 10.1016/0021-9290(78)90045-3 DeLee, 1976, Radiological demarcation of cemented sockets in total hip replacement, Clin. Orthop., 121, 20 Goel, 1978, Stresses in the normal pelvis, Comput. Biol. Med., 8, 91, 10.1016/0010-4825(78)90001-X Harris, 1973, Preliminary report of results of Harris total hip replacement, Clin. Orthop., 95, 168 Hori, 1980, Retrieval analysis of total joint implants, 60 Huiskes, 1979, Some fundamental aspects of human joint replacement. Analyses of stresses and heat conduction in bone-prosthesis structures, Acta orthop. scand., 185 Jacob, 1976, Mechanical function of subchondral bone as experimentally determined on the acetabulum of the human pelvis, J. Biomechanics, 9, 625, 10.1016/0021-9290(76)90103-2 Oonishi, 1980, Mechanical analysis of the human pelvis in normal and after replaced with artificial hip joint. Part 1, wet cadaveric human pelvis, Seikei Geka, 31, 419 Oonishi, 1980, Mechanical analysis of the human pelvis in normal and after replaced with artificial hip joint. Part 2, three-dimensional finite element method and photoelastic method [A], Seikei Geka, 31, 525 Oonishi, 1980, Mechanical analysis of the human pelvis in normal and after replaced with artificial hip joint. Part 3, three-dimensional finite element method and photoelastic method [B], Seikei Geka, 31, 643 Oonishi, 1981, 3D-finite element analysis of the pelvis and ceramic acetabulum, Trans. Orthop. Res. Soc., 6, 72 Pawluk, 1980, The effect of surgical preparation on acetabular cup fixation, Trans. Orthop. Res. Soc., 5, 184 Pedersen, 1981, An analysis of acetabular component design, Trans. Orthop. Res. Soc., 6, 71 Petty, 1980, In vitro evaluation of the effect of acetabular prosthesis implantation on human cadaver pelves, Bull. Prosth. Res., 17, 80 Rose, 1980, On the true wear rate of ultra-high molecular weight polyethylene in the total hip prosthesis, J. Bone Jt Surg., 62-A, 537, 10.2106/00004623-198062040-00007 Salvati, 1976, Radiology of total hip replacement, Clin. Orthop., 121, 74 Salvati, 1979, Fracture of polyethylene acetabular cups — report of two cases, J. Bone Jt Surg., 61-A, 1239, 10.2106/00004623-197961080-00016 Svensson, 1977, Stress analysis of human femur with implanted Charnley prosthesis, J. Biomechanics, 10, 581, 10.1016/0021-9290(77)90038-0 White, 1981, Metal-backed acetabular components: six year clinical experience Wilson, 1965, Structural analysis of axisymmetric solids, Am. Inst. Aeronaut. Astronaut. J., 3, 2269, 10.2514/3.3356