High-efficiency flame-retardant epoxy resin using phosphoraphenanthrene/thiazole-based co-curing agent

Journal of Thermal Analysis and Calorimetry - Tập 148 - Trang 10115-10124 - 2023
Lan Li1, Xiwei Li1, Shengbing Wan2, Zheng Liu2, Yafen Zhang2, Qinghong Kong1, Junhao Zhang3
1School of Emergency Management, Jiangsu University, Zhenjiang, China
2Zhejiang Jiamin New Materials Co., Ltd., Jiaxing, China
3School of Environmental and Chemical Engineering, Jiangsu University of Science and Technology, Zhenjiang, China

Tóm tắt

To alleviate the fire hazard of epoxy resin (EP), an efficient flame retardant (ADM) containing phosphophenanthrene and thiazole groups is synthesized and used as co-curing agent for 4,4′-diaminodiphenyl methane to prepare EP/ADM composites. EP/4 mass% ADM composites with phosphorus content of only 0.25 mass% reach UL-94 V-0 rating and the limiting oxygen index value is high to 35.8%. The results reveal that the peak heat release rate, total smoke production, and total heat release of EP/4 mass% ADM composites are reduced by 24%, 14.4% and 16.7%, respectively, in comparison with those of pure EP. The improvement in flame retardancy is mainly attributed to the decomposition of DOPO which produces HPO• and PO• to capture the reactive radicals in the gaseous phase. The thiazole group releases hindered amine groups and inactive gas with a dilution effect in the gaseous phase thus further enhancing the effect of the phosphophenanthrene group. Besides, ADM helps to increase the glass transition temperature (Tg) of EP/ADM composites, which is 176 °C for EP/4 mass% ADM composites, which is higher than the value (172 °C) of EP.

Tài liệu tham khảo

Jiang G-Y, Xiao Y-L, Qian Z-Y, Yang Y-T, Jia P-F, Song L, et al. A novel phosphorus-, nitrogen- and sulfur-containing macromolecule flame retardant for constructing high-performance epoxy resin composites. Chem Eng J. 2023;451: 137823. Kong Q-H, Zhu H-J, Fan J-S, Zheng G-L, Zhang C-J, Wang Y, et al. Boosting flame retardancy of epoxy resin composites through incorporating ultrathin nickel phenylphosphate nanosheets. J Appl Polym Sci. 2020;138(16):50265. Zhi M-Y, Yang X, Fan R, Yue S, Zheng L-L, Liu Q-Y, et al. A comprehensive review of reactive flame-retardant epoxy resin: fundamentals, recent developments, and perspectives. Polym Degrad Stab. 2022;201: 109976. Zhu H-J, Chen Y-M, Huang S, Wang Y, Yang R, Chai H-Y, et al. Suppressing fire hazard of poly(vinyl alcohol) based on (NH4)2[VO(HPO4)]2(C2O4)·5H2O with layered structure. J Appl Polym Sci. 2021;138(45):51345. Jin S-L, Liu Z, Qian L-J, Qiu Y, Chen Y-J, Xu B. Epoxy thermoset with enhanced flame retardancy and physical-mechanical properties based on reactive phosphaphenanthrene compound. Polym Degrad Stab. 2020;172: 109063. Salasinska K, Celiński M, Barczewski M, Leszczyński M, Borucka M, Kozikowski P. Fire behavior of flame retarded unsaturated polyester resin with high nitrogen content additives. Polym Test. 2020;84: 106379. Kong Q-H, Wu Z-H, Wang D-Y. Simultaneously improving flame retardancy and dynamic mechanical properties of epoxy resin nanocomposites through layered copper phenylphosphate. Compos Sci Technol. 2018;154:136–44. Kong Q-H, Wu T, Tang Y-Q, Xiong L-M, Liu H, Zhang J-H, et al. Improving thermal and flame retardant properties of epoxy resin with organic NiFe-layered double hydroxide-carbon nanotubes hybrids. Chin J Chem. 2017;35(12):1875–80. Wang X, Kalali E, Wan J-T, Wang D-Y. Carbon-family materials for flame retardant polymeric materials. Prog Polym Sci. 2017;69:22–46. Jiang J, Cheng Y-B, Liu Y, Wang Q, He Y-S, Wang B-W. Intergrowth charring for flame-retardant glass fabric-reinforced epoxy resin composites. J Mater Chem A. 2015;3(8):4284–90. Kong Q-H, Sun Y-L, Zhang C-J, Guan H-M, Zhang J-H, Wang D-Y, et al. Ultrathin iron phenyl phosphonate nanosheets with appropriate thermal stability for improving fire safety in epoxy. Compos Sci Technol. 2019;182: 107748. Lin C, Chou Y-C, Shiao W, Wang M-W. High temperature, flame-retardant, and transparent epoxy thermosets prepared from an acetovanillone-based hydroxyl poly(ether sulfone) and commercial epoxy resins. Polymer. 2016;97:300–8. El Gouri M, El Bachiri A, Hegazi S, Rafik M, El Harfi A. Thermal degradation of a reactive flame retardant based on cyclotriphosphazene and its blend with DGEBA epoxy resin. Polym Degrad Stab. 2009;94(11):2101–6. Nazir R, Gaan S. Recent developments in P(O/S)–N containing flame retardants. J Appl Polym Sci. 2019;137(1):47910. Zhu Z-M, Wang L-X, Dong L-P. Influence of a novel P/N-containing oligomer on flame retardancy and thermal degradation of intumescent flame-retardant epoxy resin. Polym Degrad Stab. 2019;162:129–37. Xu Y-J, Wang J, Tan Y, Qi M, Chen L, Wang Y-Z. A novel and feasible approach for one-pack flame-retardant epoxy resin with long pot life and fast curing. Chem Eng J. 2018;337:30–9. Tan Y, Shao Z-B, Yu L-X, Long J-W, Qi M, Chen L, et al. Piperazine-modified ammonium polyphosphate as monocomponent flame-retardant hardener for epoxy resin: flame retardance, curing behavior and mechanical property. Polym Chem. 2016;7(17):3003–12. Huo S-Q, Liu Z-T, Li C, Wang X-L, Cai H-P, Wang J. Synthesis of a phosphaphenanthrene/benzimidazole-based curing agent and its application in flame-retardant epoxy resin. Polym Degrad Stab. 2019;163:100–9. Xu M-J, Xu G-R, Leng Y, Li B. Synthesis of a novel flame retardant based on cyclotriphosphazene and DOPO groups and its application in epoxy resins. Polym Degrad Stab. 2016;123:105–14. He X-D, Zhang W-C, Yang R-J. The characterization of DOPO/MMT nanocompound and its effect on flame retardancy of epoxy resin. Compos Part A: Compos Part A Appl Sci Manuf. 2017;98:124–35. Chi Z-Y, Guo Z-W, Xu Z-C, Zhang M-J, Li M, Shang L, et al. A DOPO-based phosphorus-nitrogen flame retardant bio-based epoxy resin from diphenolic acid: Synthesis, flame-retardant behavior and mechanism. Polym Degrad Stab. 2020;176: 109151. Luo H-Q, Rao W-H, Zhao P, Wang L, Liu Y-L, Yu C-B. An efficient organic/inorganic phosphorus–nitrogen–silicon flame retardant towards low-flammability epoxy resin. Polym Degrad Stab. 2020;178: 109195. Brehme S, Schartel B, Goebbels J, Fischer O, Pospiech D, Bykov Y, et al. Phosphorus polyester versus aluminium phosphinate in poly(butylene terephthalate) (PBT): flame retardancy performance and mechanisms. Polym Degrad Stab. 2011;96(5):875–84. Schartel B, Perret B, Dittrich B, Ciesielski M, Krämer J, Müller P, et al. Flame retardancy of polymers: the role of specific reactions in the condensed phase. Macromol Mater Eng. 2016;301(1):9–35. Kumar S, Denchev Z. Development and characterization of phosphorus-containing siliconized epoxy resin coatings. Prog Org Coat. 2009;66(1):1–7. Wang H, Li S, Zhu Z-M, Yin X-Z, Wang L-X, Weng Y-X, et al. A novel DOPO-based flame retardant containing benzimidazolone structure with high charring ability towards low flammability and smoke epoxy resins. Polym Degrad Stab. 2021;183:109426. Gu L-Q, Chen G-A, Yao Y-W. Two novel phosphorus–nitrogen-containing halogen-free flame retardants of high performance for epoxy resin. Polym Degrad Stab. 2014;108:68–75. Ning K, Zhou L-L, Zhao B. A novel aminothiazole-based cyclotriphosphazene derivate towards epoxy resins for high flame retardancy and smoke suppression. Polym Degrad Stab. 2021;190: 109651. Huo S-Q, Wang J, Yang S, Zhang B, Chen X, Wu Q-L, et al. Synthesis of a novel reactive flame retardant containing phosphaphenanthrene and piperidine groups and its application in epoxy resin. Polym Degrad Stab. 2017;146:250–9. Sun D-C, Yao Y-W. Synthesis of three novel phosphorus-containing flame retardants and their application in epoxy resins. Polym Degrad Stab. 2011;96(10):1720–4. Xie W-Q, Huang S-W, Tang D-L, Liu S-M, Zhao J-Q. Biomass-derived Schiff base compound enabled fire-safe epoxy thermoset with excellent mechanical properties and high glass transition temperature. Chem Eng J. 2020;394: 123667. Wang P, Xia L, Jian R-K, Ai Y-F, Zheng X-L, Chen G-L, et al. Flame-retarding epoxy resin with an efficient P/N/S-containing flame retardant: preparation, thermal stability, and flame retardance. Polym Degrad Stab. 2018;149:69–77. Xu Y-J, Shi X-H, Lu J-H, Qi M, Guo D-M, Chen L, et al. Novel phosphorus-containing imidazolium as hardener for epoxy resin aiming at controllable latent curing behavior and flame retardancy. Compos B Eng. 2020;184: 107673. Zhang Q-Q, Wang J, Yang S, Cheng J-W, Ding G-P, Huo S-Q. Facile construction of one-component intrinsic flame-retardant epoxy resin system with fast curing ability using imidazole-blocked bismaleimide. Compos B Eng. 2019;177: 107380. Wang D-H, Liu Q-Y, Peng X-L, Liu C-B, Li Z-K, Li Z-F, et al. High-efficiency phosphorus/nitrogen-containing flame retardant on epoxy resin. Polym Degrad Stab. 2021;187: 109544. Wu H-Y, Li Y-T, Zeng B-R, Chen G-R, Wu Y-Z, Chen T, et al. A high synergistic P/N/Si-containing additive with dandelion-shaped structure deriving from self-assembly for enhancing thermal and flame retardant property of epoxy resins. React Funct Polym. 2018;131:89–99. Perret B, Schartel B, Stöß K, Ciesielski M, Diederichs J, Döring M, et al. A new halogen-free flame retardant based on 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide for epoxy resins and their carbon fiber composites for the automotive and aviation industries. Macromol Mater Eng. 2011;296(1):14–30. Kong Q-H, Wu T, Wang J, Liu H, Zhang J. Improving the thermal stability and flame retardancy of PP/IFR composites by NiAl-layered double hydroxide. J Nanosci Nanotechnol. 2018;18(5):3660–5. Wen P-Y, Feng X-M, Kan Y-C, Hu Y, Yuen R. Synthesis of a novel triazine-based polymeric flame retardant and its application in polypropylene. Polym Degrad Stab. 2016;134:202–10. Zhang Q-Q, Yang S, Wang J, Cheng J-W, Zhang Q-X, Ding G-P, et al. A DOPO based reactive flame retardant constructed by multiple heteroaromatic groups and its application on epoxy resin: curing behavior, thermal degradation and flame retardancy. Polym Degrad Stab. 2019;167:10–20.