Roles of nanoparticles in oil lubrication

Tang, 2014, A review of recent developments of friction modifiers for liquid lubricants (2007–present), Curr Opin Solid State Mater Sci, 18, 119, 10.1016/j.cossms.2014.02.002 Rapoport, 2002, Mechanism of friction of fullerenes, Ind Lubr Tribol, 54, 171, 10.1108/00368790210431727 Wu, 2007, Experimental analysis of tribological properties of lubricating oils with nanoparticle additives, Wear, 262, 819, 10.1016/j.wear.2006.08.021 Chiñas-Castillo, 2003, Mechanism of action of colloidal solid dispersions, J Tribol, 125, 552, 10.1115/1.1537752 Hu, 2002, Preparation and tribological properties of nanometer magnesium borate as lubricating oil additive, Wear, 252, 370, 10.1016/S0043-1648(01)00862-6 Xiaodong, 2007, Lubricating properties of Cyanex 302–modified MoS2 microspheres in base oil 500SN, Lubr Sci, 19, 71, 10.1002/ls.32 Ginzburg, 2002, Antiwear effect of fullerene C 6 0 additives to lubricating oils, Russ J Appl Chem, 75, 1330, 10.1023/A:1020929515246 Zhou, 1999, Study on the structure and tribological properties of surface-modified Cu nanoparticles, Mater Res Bull, 34, 1361, 10.1016/S0025-5408(99)00150-6 Rastogi, 2002, Application of molybdenum complexes of 1-aryl-2, 5-dithiohydrazodicarbonamides as extreme pressure lubricant additives, Wear, 252, 686, 10.1016/S0043-1648(01)00878-X Liu, 2004, Investigation of the mending effect and mechanism of copper nano-particles on a tribologically stressed surface, Tribol Lett, 17, 961, 10.1007/s11249-004-8109-6 Tao, 1996, The ball-bearing effect of diamond nanoparticles as an oil additive, J Phys D: Appl Phys, 29, 2932, 10.1088/0022-3727/29/11/029 Fangsuwannarak, 2013, Effect of metalloid compound and bio-solution additives on biodiesel engine performance and exhaust emissions, Am J Appl Sci, 10, 1201, 10.3844/ajassp.2013.1201.1213 Khond, 2016, Effect of nanofluid additives on performances and emissions of emulsified diesel and biodiesel fueled stationary CI engine: a comprehensive review, Renew Sustain Energy Rev, 59, 1338, 10.1016/j.rser.2016.01.051 Sajeevan, 2013, Diesel engine emission reduction using catalytic nanoparticles: an experimental investigation, J Eng, 2013, 10.1155/2013/589382 Sajith, 2010, Experimental investigations on the effects of cerium oxide nanoparticle fuel additives on biodiesel, Adv Mech Eng, 2, 581407, 10.1155/2010/581407 Abdel-Hadi EA-H, Taher SH, Torki AHM, Hamad SS. Heat transfer analysis of vapor compression system using nano CuO-R134a. In: International Conference on Advanced Materials Engineering: IPCSIT; 2011. p. 80–4. Wang, 1999, Thermal conductivity of nanoparticle-fluid mixture, J Thermophys Heat Transf, 13, 474, 10.2514/2.6486 Bartelt K, Park Y, Liu L, Jacobi A. Flow-boiling of R-134a/POE/CuO nanofluids in a horizontal tube; 2008. Bi, 2011, Performance of a domestic refrigerator using TiO2-R600a nano-refrigerant as working fluid, Energy Convers Manag, 52, 733, 10.1016/j.enconman.2010.07.052 Zhang, 2012, Fundamental understanding of the tribological and thermal behavior of Ag–MoS2 nanoparticle-based multi-component lubricating system, Wear, 288, 9, 10.1016/j.wear.2012.03.003 Ma, 2009, Effect of Ag nanoparticles additive on the tribological behavior of multialkylated cyclopentanes (MACs), Wear, 266, 627, 10.1016/j.wear.2008.08.006 Ghaednia, 2013, The effect of nanoparticles on thin film elasto-hydrodynamic lubrication, Appl Phys Lett, 103, 263111, 10.1063/1.4858485 Luo, 2014, Tribological properties of Al2O3 nanoparticles as lubricating oil additives, Ceram Int, 40, 7143, 10.1016/j.ceramint.2013.12.050 Kedzierski, 2015, Effect of concentration on R134a/Al2O3 nanolubricant mixture boiling on a reentrant cavity surface, Int J Refrig, 49, 36, 10.1016/j.ijrefrig.2014.09.012 Peña-Parás, 2015, Effect of CuO and Al2O3 nanoparticle additives on the tribological behavior of fully formulated oils, Wear, 332–333, 1256, 10.1016/j.wear.2015.02.038 Jiao, 2011, The tribology properties of alumina/silica composite nanoparticles as lubricant additives, Appl Surf Sci, 257, 5720, 10.1016/j.apsusc.2011.01.084 Luo, 2014, Tribology properties of Al2O3/TiO2 nanocomposites as lubricant additives, Ceram Int, 40, 10103, 10.1016/j.ceramint.2014.03.181 Flores-Castañeda, 2015, Bismuth nanoparticles synthesized by laser ablation in lubricant oils for tribological tests, J Alloy Compd, 643, S67, 10.1016/j.jallcom.2014.12.054 Manning, 2015, Innovative boron nitride-doped propellants, Def Technol Xu, 2013, Study on the selectivity of calcium carbonate nanoparticles under the boundary lubrication condition, Wear, 307, 35, 10.1016/j.wear.2013.07.010 Shen, 2016, Tribological properties and tribochemical analysis of nano-cerium oxide and sulfurized isobutene in titanium complex grease, Tribol Int, 93, 332, 10.1016/j.triboint.2015.09.028 Yang, 2013, Synthesis and characterization of highly stable dispersions of copper nanoparticles by a novel one-pot method, Mater Res Bull, 48, 1716, 10.1016/j.materresbull.2013.01.025 Hu, 2013, Nucleate pool boiling heat transfer characteristics of refrigerant/nanolubricant mixture with surfactant, Int J Refrig, 36, 1045, 10.1016/j.ijrefrig.2012.12.015 Pan, 2010, Synthesis and tribological behavior of oil-soluble Cu nanoparticles as additive in SF15W/40 lubricating oil, Rare Met Mater Eng, 39, 1711, 10.1016/S1875-5372(10)60129-4 Yu H-l, 2008, Tribological properties and lubricating mechanisms of Cu nanoparticles in lubricant, Trans Nonferr Met Soc China, 18, 636, 10.1016/S1003-6326(08)60111-9 Wang, 2013, Study on antiwear and repairing performances about mass of nano-copper lubricating additives to 45 Steel, Phys Procedia, 50, 466, 10.1016/j.phpro.2013.11.073 Zhang, 2011, CU nanoparticles effect on the tribological properties of hydrosilicate powders as lubricant additive for steel–steel contacts, Tribol Int, 44, 878, 10.1016/j.triboint.2011.03.002 Zhang, 2012, Preparation and tribological properties of water-soluble copper/silica nanocomposite as a water-based lubricant additive, Appl Surf Sci, 259, 824, 10.1016/j.apsusc.2012.07.132 Kedzierski, 2009, Effect of CuO nanolubricant on R134a pool boiling heat transfer, Int J Refrig, 32, 791, 10.1016/j.ijrefrig.2008.12.007 Shenoy, 2012, Effect of nanoparticles additives on the performance of an externally adjustable fluid film bearing, Tribol Int, 45, 38, 10.1016/j.triboint.2011.10.004 Kang, 2008, Synthesis and tribological property study of oleic acid-modified copper sulfide nanoparticles, Wear, 265, 150, 10.1016/j.wear.2007.09.009 Peng, 2009, Tribological properties of diamond and SiO2 nanoparticles added in paraffin, Tribol Int, 42, 911, 10.1016/j.triboint.2008.12.015 Elomaa, 2013, Diamond nanoparticles in ethylene glycol lubrication on steel–steel high load contact, Diam Relat Mater, 34, 89, 10.1016/j.diamond.2013.02.008 Padgurskas, 2013, Tribological properties of lubricant additives of Fe, Cu and Co nanoparticles, Tribol Int, 60, 224, 10.1016/j.triboint.2012.10.024 Zhou, 2013, Sliding tribological properties of 0.45% carbon steel lubricated with Fe3O4 magnetic nano-particle additives in baseoil, Wear, 301, 753, 10.1016/j.wear.2013.01.027 Rabaso, 2014, Boundary lubrication: influence of the size and structure of inorganic fullerene-like MoS2 nanoparticles on friction and wear reduction, Wear, 320, 161, 10.1016/j.wear.2014.09.001 Zhao, 2016, An investigation on the tribological properties of multilayer graphene and MoS2 nanosheets as additives used in hydraulic applications, Tribol Int, 97, 14, 10.1016/j.triboint.2015.12.006 Greco, 2011, Friction and wear behaviour of boron based surface treatment and nano-particle lubricant additives for wind turbine gearbox applications, Wear, 271, 1754, 10.1016/j.wear.2010.11.060 Li, 2015, Tribological performance of Mg/Al/Ce layered double hydroxides nanoparticles and intercalated products as lubricant additives, Appl Surf Sci, 353, 643, 10.1016/j.apsusc.2015.05.091 Lahouij, 2012, IF-MoS2 based lubricants: influence of size, shape and crystal structure, Wear, 296, 558, 10.1016/j.wear.2012.07.016 Tenne, 2002, Fullerene-like materials and nanotubes from inorganic compounds with a layered (2-D) structure, Colloids Surf A: Physicochem Eng Asp, 208, 83, 10.1016/S0927-7757(02)00104-8 Rapoport, 1999, Inorganic fullerene-like material as additives to lubricants: structure–function relationship, Wear, 225, 975, 10.1016/S0043-1648(99)00040-X Li, 2015, Friction properties of La-doped Mg/Al layered double hydroxide and intercalated product as lubricant additives, Tribol Int, 91, 60, 10.1016/j.triboint.2015.06.012 Hou, 2014, Preparation and tribological properties of fluorosilane surface-modified lanthanum trifluoride nanoparticles as additive of fluoro silicone oil, Appl Surf Sci, 316, 515, 10.1016/j.apsusc.2014.07.171 Xu, 2015, Formation of an adsorption film of MoS2 nanoparticles and dioctyl sebacate on a steel surface for alleviating friction and wear, Tribol Int, 92, 172, 10.1016/j.triboint.2015.06.011 Kalin, 2013, Nanoparticles as novel lubricating additives in a green, physically based lubrication technology for DLC coatings, Wear, 303, 480, 10.1016/j.wear.2013.03.009 Kalin, 2012, Mechanisms and improvements in the friction and wear behavior using MoS2 nanotubes as potential oil additives, Wear, 280–281, 36, 10.1016/j.wear.2012.01.011 Zhang, 1994, Synthesis and characterization of a molybdenum disulfide nanocluster, J Phys Chem, 98, 12973, 10.1021/j100100a027 Santillo, 2012, MoS2 nanoparticle precipitation in turbulent micromixers, Chem Eng J, 207–208, 322, 10.1016/j.cej.2012.06.127 Xie, 2016, Lubrication performance of MoS2 and SiO2 nanoparticles as lubricant additives in magnesium alloy-steel contacts, Tribol Int, 93, 63, 10.1016/j.triboint.2015.08.009 Nunn, 2015, Tribological properties of polyalphaolefin oil modified with nanocarbon additives, Diam Relat Mater, 54, 97, 10.1016/j.diamond.2014.09.003 Meng, 2015, Synthesis of nano-Cu/graphene oxide composites by supercritical CO2-assisted deposition as a novel material for reducing friction and wear, Chem Eng J, 281, 11, 10.1016/j.cej.2015.06.073 Dubey, 2015, Nano-PTFE: new entrant as a very promising EP additive, Tribol Int, 87, 121, 10.1016/j.triboint.2015.01.026 Chou, 2010, Tribological behavior of polyalphaolefin with the addition of nickel nanoparticles, Tribol Int, 43, 2327, 10.1016/j.triboint.2010.08.006 Ye, 2002, Preparation of NiMoO2S2 nanoparticle and investigation of its tribological behavior as additive in lubricating oils, Wear, 253, 572, 10.1016/S0043-1648(02)00042-X Chen, 2013, Preparation of nickel-based nanolubricants via a facile in situ one-step route and investigation of their tribological properties, Tribol Lett, 51, 73, 10.1007/s11249-013-0148-4 Gu, 2013, Preparation and tribological properties of lanthanum-doped TiO2 nanoparticles in rapeseed oil, J Rare Earths, 31, 589, 10.1016/S1002-0721(12)60325-1 Abad, 2013, Tribological properties of surface-modified Pd nanoparticles for electrical contacts, Wear, 297, 943, 10.1016/j.wear.2012.11.009 Sánchez-López, 2011, Surface-modified Pd and Au nanoparticles for anti-wear applications, Tribol Int, 44, 720, 10.1016/j.triboint.2009.12.013 Rico, 2009, Rolling contact fatigue life of AISI 52100 steel balls with mineral and synthetic polyester lubricants with PTFE nanoparticle powder as an additive, Wear, 266, 671, 10.1016/j.wear.2008.08.020 Rico, 2007, The effectiveness of PTFE nanoparticle powder as an EP additive to mineral base oils, Wear, 262, 1399, 10.1016/j.wear.2007.01.022 Yadgarov, 2013, Tribological studies of rhenium doped fullerene-like MoS2 nanoparticles in boundary, mixed and elasto-hydrodynamic lubrication conditions, Wear, 297, 1103, 10.1016/j.wear.2012.11.084 Boshui, 2015, Tribological characteristics of monodispersed cerium borate nanospheres in biodegradable rapeseed oil lubricant, Appl Surf Sci, 353, 326, 10.1016/j.apsusc.2015.06.107 Yu, 2010, Tribological behaviors of surface-coated serpentine ultrafine powders as lubricant additive, Tribol Int, 43, 667, 10.1016/j.triboint.2009.10.006 Zhao, 2012, Tribological properties of serpentine, La(OH)3 and their composite particles as lubricant additives, Wear, 288, 72, 10.1016/j.wear.2012.02.009 Bobbo, 2010, Influence of nanoparticles dispersion in POE oils on lubricity and R134a solubility, Int J Refrig, 33, 1180, 10.1016/j.ijrefrig.2010.04.009 Li, 2006, Surface-modification in situ of nano-SiO2 and its structure and tribological properties, Appl Surf Sci, 252, 7856, 10.1016/j.apsusc.2005.09.068 Zhang, 2013, Anti-wear and friction-reduction mechanism of Sn and Fe nanoparticles as additives of multialkylated cyclopentanes under vacuum condition, Vacuum, 87, 75, 10.1016/j.vacuum.2012.07.009 Li, 2014, Preparation of lanthanum trifluoride nanoparticles surface-capped by tributyl phosphate and evaluation of their tribological properties as lubricant additive in liquid paraffin, Appl Surf Sci, 292, 971, 10.1016/j.apsusc.2013.12.089 Krishna Sabareesh, 2012, Application of TiO2 nanoparticles as a lubricant-additive for vapor compression refrigeration systems – an experimental investigation, Int J Refrig, 35, 1989, 10.1016/j.ijrefrig.2012.07.002 Binu, 2014, A variable viscosity approach for the evaluation of load carrying capacity of oil lubricated journal bearing with TiO2 nanoparticles as lubricant additives, Procedia Mater Sci, 6, 1051, 10.1016/j.mspro.2014.07.176 Ye, 2003, Preparation and tribological properties of tetrafluorobenzoic acid-modified TiO2 nanoparticles as lubricant additives, Mater Sci Eng: A, 359, 82, 10.1016/S0921-5093(03)00353-8 Zulkifli, 2013, Experimental analysis of tribological properties of biolubricant with nanoparticle additive, Procedia Eng, 68, 152, 10.1016/j.proeng.2013.12.161 Peña-Parás, 2015, Thermal transport and tribological properties of nanogreases for metal-mechanic applications, Wear, 332–333, 1322, 10.1016/j.wear.2015.01.062 Kao, 2009, Evaluating the role of spherical titanium oxide nanoparticles in reducing friction between two pieces of cast iron, J Alloy Compd, 483, 456, 10.1016/j.jallcom.2008.07.223 Tan, 2016, Zeolite nanoparticles as effective antioxidant additive for the preservation of palm oil-based lubricant, J Taiwan Inst Chem Eng, 58, 565, 10.1016/j.jtice.2015.06.032 Song, 2012, Synthesis of monodispersed ZnAl2O4 nanoparticles and their tribology properties as lubricant additives, Mater Res Bull, 47, 4305, 10.1016/j.materresbull.2012.09.013 Hernandez Battez, 2006, The tribological behaviour of ZnO nanoparticles as an additive to PAO6, Wear, 261, 256, 10.1016/j.wear.2005.10.001 Alves, 2013, Tribological behavior of vegetable oil-based lubricants with nanoparticles of oxides in boundary lubrication conditions, Tribol Int, 65, 28, 10.1016/j.triboint.2013.03.027 Ma, 2010, Anti-wear and friction performance of ZrO2 nanoparticles as lubricant additive, Particuology, 8, 468, 10.1016/j.partic.2009.06.007 He, 2014, α-Zirconium phosphate nanoplatelets as lubricant additives, Colloids Surf A: Physicochem Eng Asp, 452, 32, 10.1016/j.colsurfa.2014.03.041 Moshkovith, 2006, Friction of fullerene-like WS2 nanoparticles: effect of agglomeration, Tribol Lett, 24, 225, 10.1007/s11249-006-9124-6 Henry, 2005, Morphology of supported nanoparticles, Prog Surf Sci, 80, 92, 10.1016/j.progsurf.2005.09.004 Huitink, 2011, Effects of particle-induced crystallization on tribological behavior of polymer nanocomposites, J Tribol, 133, 021603, 10.1115/1.4003562 Huitink, 2010, Nanoparticle shape evolution identified through multivariate statistics, J Phys Chem A, 114, 5596, 10.1021/jp100421t Joly-Pottuz, 2006, Pressure-induced exfoliation of inorganic fullerene-like WS2 particles in a Hertzian contact, J Appl Phys, 99, 3524, 10.1063/1.2165404 Joly-Pottuz, 2008, Carbon-based nanolubricants, Nanolubricants, 93, 10.1002/9780470987711.ch3 Tevet, 2011, Friction mechanism of individual multilayered nanoparticles, Proc Natl Acad Sci USA, 108, 19901, 10.1073/pnas.1106553108 Rapoport, 2003, Tribological properties of WS 2 nanoparticles under mixed lubrication, Wear, 255, 785, 10.1016/S0043-1648(03)00044-9 Fischer, 1996, Well-founded selection of materials for improved wear resistance, Wear, 194, 238, 10.1016/0043-1648(95)06738-8 Rapoport, 1997, Hollow nanoparticles of WS 2 as potential solid-state lubricants, Nature, 387, 791, 10.1038/42910 Rapoport, 2005, Friction and wear of fullerene-like WS2 under severe contact conditions: friction of ceramic materials, Tribol Lett, 19, 143, 10.1007/s11249-005-5095-2 Joly-Pottuz, 2005, Ultralow-friction and wear properties of IF-WS2 under boundary lubrication, Tribol Lett, 18, 477, 10.1007/s11249-005-3607-8 Berman, 2014, Graphene: a new emerging lubricant, Mater Today, 17, 31, 10.1016/j.mattod.2013.12.003 Onodera, 2009, A computational chemistry study on friction of h-MoS2. Part I. Mechanism of single sheet lubrication, J Phys Chem B, 113, 16526, 10.1021/jp9069866 He, 2014, Two-dimensional nanostructured Y2O3 particles for viscosity modification, Appl Phys Lett, 104, 163107, 10.1063/1.4873119 Spear, 2015, 2D-nanomaterials for controlling friction and wear at interfaces, Nano Today, 10, 301, 10.1016/j.nantod.2015.04.003 Xiao, 2015, Amine-intercalated α-zirconium phosphates as lubricant additives, Appl Surf Sci, 329, 384, 10.1016/j.apsusc.2014.12.061