Thermal plasma technology for the treatment of wastes: A critical review

Colombo, 2003, Inertization and reuse of waste materials by vitrification and fabrication of glass-based products, Curr. Opin. Solid State Mater. Sci., 7, 225, 10.1016/j.cossms.2003.08.002 Sabbas, 2003, Management of municipal solid waste incineration residues, Waste Manage., 23, 61, 10.1016/S0956-053X(02)00161-7 Kuo, 2006, Immobilization and encapsulation during vitrification of incineration ashes in a coke bed furnace, J. Hazard. Mater., 133, 75, 10.1016/j.jhazmat.2005.09.055 Auciello, 1989, vol. 1 Boulos, 1991, Thermal plasma processing, IEEE Trans. Plasma Sci., 19, 1078, 10.1109/27.125032 Fiedler, 2004, Experimental and numerical investigations of a plasma reactor for the thermal destruction of medical waste using a model substance, J. Phys. D: Appl. Phys., 37, 1031, 10.1088/0022-3727/37/7/013 Boulos, 1996, New frontiers in thermal plasma processing, Pure Appl. Chem., 68, 1007, 10.1351/pac199668051007 Murphy, 1999, Plasma destruction of gaseous and liquid wastes, Ann. NY Acad. Sci., (Heat and Mass Transfer Under Plasma Conditions), 106 Bonizzoni, 2002, Plasma physics and technology; industrial applications, Vacuum, 64, 327, 10.1016/S0042-207X(01)00341-4 Tendler, 2005, Plasma based waste treatment and energy production, Plasma Phys. Controlled Fusion, 47, A219, 10.1088/0741-3335/47/5A/016 Gleizes, 2005, Thermal plasma modelling, J. Phys. D: Appl. Phys., 38, R153, 10.1088/0022-3727/38/9/R01 Kogelschatz, 2004, Atmospheric-pressure plasma technology, Plasma Phys. Controlled Fusion, 46, B63, 10.1088/0741-3335/46/12B/006 Fauchais, 2000, Pending problems in thermal plasmas and actual development, Plasma Phys. Controlled Fusion, 42, B365, 10.1088/0741-3335/42/12B/327 Moustakas, 2005, Demonstration plasma gasification/vitrification system for effective hazardous waste treatment, J. Hazard. Mater., 123, 120, 10.1016/j.jhazmat.2005.03.038 Soucy, 1998, Design of an induction plasma reactor for the reforming of aromatic liquid wastes, High Temp. Mater. Processes, 2, 195 Park, 2006, Characteristics of PE gasification by steam plasma, J. Ind. Eng. Chem., 12, 216 Park, 2005, Analysis of a plasma melting system for incinerated ash, J. Ind. Eng. Chem., 11, 657 Pfender, 1999, Thermal plasma technology: where do we stand and where are we going?, J. Ind. Eng. Chem., 19, 1 CO. TETRONICS, November 2006, Available from: http://www.tetronics.com/pdf/plasma_vitrification_fact_sheet.pdf. http://www.autobloggreen.com/2007/04/11/advanced-plasma-power-technology-converts-garbage-into-gas/; http://www.enviroarc.com/; http://www.geoplasma.com/; http://www.greencarcongress.com/2007/04/new_joint_ventu.html; http://www.magnegas.com/; http://www.plascoenergygroup.com/; http://www.plasmaenvironmental.com/; http://www.pyrogenesis.com/; http://www.solenagroup.com/html/tech/tech.asp; http://www.startech.net/; http://www.inentec.com/whois_iet.html. Lopez, 2000, Final disposition of municipal solid waste: need for an integral approach, Ingenieria Quimica, 18, 45 Scott, 2005, Landfill management, leachate generation, and leach testing of solid wastes in Australia and overseas, Crit. Rev. Environ. Sci. Technol., 35, 239, 10.1080/10643380590917969 Heller, 2003, Solid waste disposal in urban areas and health—the case of Belo Horizonte, Brazil, Waste Manage. Res., 21, 549, 10.1177/0734242X0302100607 Yang, 2003, Cutting wastes from municipal solid waste incinerator plants, Process Saf. Environ. Prot., 81, 143, 10.1205/095758203765639843 E.E.S. Association, http://www.esauk.org (accessed November 2006). DEFRA, Environmental Services Association (ESA), Draft APC residue case study, 2005 (cited December 2006). Available from: http://www.defra.gov.uk/environment/waste/hazforum/pdf/hwf-3-5iv.pdf. E.S.A. (ESA), Legislation and Policy, 2005 [cited December 2006]. Available from: http://www.esauk.org/legislation/. E.C. (EC), Official Journal. Council directive 1999/31/EC on the landfill of Waste. Official Journal of the European Communities L182/1–19, 1999. WRc Ref:/11873-0, Characterisation of air pollution control residues from MSW energy from waste, Resource Recovery Forum, 2004. Karloy, 2007, Production of glass-ceramics from fly ash using arc plasma, J. Eur. Ceram. Soc., 27, 1721, 10.1016/j.jeurceramsoc.2006.05.015 Cerqueira, 2004, Heavy metals volatility during thermal plasma vitrification of mineral waste, Environ. Eng. Sci., 21, 83, 10.1089/109287504322746785 Chen, 1997, Dynamics of complex chemical system vaporization at high temperature. Application to the vitrification of fly ashes by thermal plasma, Chem. Eng. Sci., 52, 4381, 10.1016/S0009-2509(97)80858-5 D. Amutha Rani, E. Gomez, A.R. Boccaccini, L. Hao, D. Deegan, C.R. Cheeseman, Air pollution control (APC) residues from waste incineration: current UK situation and alternative technologies, Waste Manage. (2007) ISSN: 0956-053X (Available online). Jimbo, 1996, Plasma melting and useful application of molten slag, Waste Manage., 16, 417, 10.1016/S0956-053X(96)00087-6 Katou, 2001, Melting municipal solid waste incineration residue by plasma melting furnace with a graphite electrode, Thin Solid Films, 386, 183, 10.1016/S0040-6090(00)01640-0 Sakai, 2000, Municipal solid waste incinerator residue recycling by thermal processes, Waste Manage., 20, 249, 10.1016/S0956-053X(99)00315-3 Cheng, 2002, Treatment and recycling of incinerated ash using thermal plasma technology, Waste Manage., 22, 485, 10.1016/S0956-053X(01)00043-5 Kim, 2004, Characteristics of fly ash/sludge slags vitrified by thermal plasma, J. Ind. Eng. Chem., 10, 234 Amutha Rani, 2008, Plasma treatment of air pollution control residues, Waste Manage., 28, 1254, 10.1016/j.wasman.2007.06.008 Poiroux, 1996, High temperature treatment of waste: from laboratories to the industrial stage, Pure Appl. Chem., 68, 1035, 10.1351/pac199668051035 Chan, 2000, Solidification and stabilization of asbestos waste from an automobile brake manufacturing facility using cement, J. Hazard. Mater., 77, 209, 10.1016/S0304-3894(00)00244-2 Chan, 2000, Solidification and stabilization of asbestos brake lining dust using polymeric resins, Environ. Eng. Sci., 17, 203, 10.1089/10928750050137543 Inaba, 2000, Treatment of waste by dc arc discharge plasmas, IEEE Trans. Dielectrics Electrical Insulation, 7, 684, 10.1109/94.879362 Inaba, 1999, Investigation of plasma treatment for hazardous wastes such as fly ash and asbestos, Electrical Eng. Jpn., 126, 73, 10.1002/(SICI)1520-6416(199902)126:3<73::AID-EEJ8>3.0.CO;2-J Deegan, 2006, The thermal treatment of hazardous wastes materials using Plasma Arc technology Nema, 2002, Plasma pyrolysis of medical waste, Curr. Sci., 83, 271 Chu, 1998, Characterization of vitrified slag from mixed medical waste surrogates treated by a thermal plasma system, J. Hazard. Mater., 58, 179, 10.1016/S0304-3894(97)00130-1 Cedzynska, 1999, Plasma vitrification of waste incinerator ashes Park, 2005, Medical waste treatment using plasma, J. Ind. Eng. Chem., 11, 353 Ye, 2003, Reduction of steel-making slags for recovery of valuable metals and oxide materials, Scand. J. Metall., 32, 7, 10.1034/j.1600-0692.2003.00526.x Burkhard, 1994, Recycling of metals from waste with thermal plasma, Resour. Conserv. Recycl., 10, 11, 10.1016/0921-3449(94)90033-7 Hare, 1987 Best, 2001, In-flight plasma reduction of electric arc furnace dust in carbon monoxide, Can. Metall. Q., 40, 61, 10.1179/cmq.2001.40.1.61 Szepvolgyi, 2004 Kikukawa, 2002, Preparation of spinel-type ferrite fine particles via plasma route using amorphous citrate gel as a precursor, Jpn. J. Appl. Phys. 1, 41, 5991, 10.1143/JJAP.41.5991 Ramachandran, 2002, Thermal plasma in-flight treatment of electroplating sludge, IEEE Trans. Plasma Sci., 30, 310, 10.1109/TPS.2002.1003875 Ramachandran, 2000, Plasma in-flight treatment of electroplating sludge, Vacuum, 59, 244, 10.1016/S0042-207X(00)00276-1 Kos, 1994, Technology for the recovery of aluminum from dross, Metallurgy, 48, 972 Neuschtz, 1996, Plasma processing of dust and residues, Pure Appl. Chem., 68, 1159, 10.1351/pac199668051159 Nishikawa, 2004, A treatment of carbonaceous wastes using thermal plasma with steam, Vacuum, 73, 589, 10.1016/j.vacuum.2003.12.074 Rutberg, 2004, Plasmochemical technologies for processing of hydrocarbonic raw material with syngas production, High Temp. Mater. Processes, 8, 433, 10.1615/HighTempMatProc.v8.i3.90 Nishikawa, 2006, Effect of DC steam plasma on gasifying carbonized waste, Vacuum, 80, 1311, 10.1016/j.vacuum.2006.01.061 Kostic, 2000, Comparative analysis of polychlorinated biphenyl decomposition processes in air or argon (plus oxygen) thermal plasma, J. Hazard. Mater., 75, 75, 10.1016/S0304-3894(00)00181-3 Ramasamy, 1996, Combustion by-products destruction by arc plasma, Hazard. Waste Hazard. Mater., 13, 131, 10.1089/hwm.1996.13.131 Sekiguchi, 1993, Thermal plasma decomposition of chlorofluorocarbons, Plasma Chem. Plasma Process., 13, 463, 10.1007/BF01465876 Cubas, 2005, Development of a DC-plasma torch constructed with graphite electrodes and an integrated nebulization system for decomposition of CCl4, J. Braz. Chem. Soc., 16, 531, 10.1590/S0103-50532005000400006 Chu, 2006, Plasma vitrification and re-use of non-combustible fiber reinforced plastic, gill net and waste glass, J. Hazard. Mater., B148, 628, 10.1016/j.jhazmat.2006.05.107 Nishigaki, 2000, Producing permeable blocks and pavement bricks from molten slag, Waste Manage., 20, 185, 10.1016/S0956-053X(99)00323-2 Rawlings, 2006, Glass-ceramics: their production from wastes-a review, J. Mater. Sci., 41, 733, 10.1007/s10853-006-6554-3 Deegan, 2003, The production of shaped glass-ceramic materials from inorganic waste precursors using controlled atmospheric DC plasma vitrification and crystallisation, High Temp. Mater. Processes, 7, 367, 10.1615/HighTempMatProc.v7.i3.100 I. Retech, Plasma centrifugal furnace, Applications Analysis Report. EPA/540/A5-91/007, Editor, 1992. Chang, 2006, Comparison of the characteristics of bottom and fly ashes generated from various incineration processes, J. Hazard. Mater., 138, 594, 10.1016/j.jhazmat.2006.05.099