Sustainable regenerated binding materials (RBM) utilizing industrial solid wastes for soil and aggregate stabilization

Aprianti S, 2017, A huge number of artificial waste material can be supplementary cementitious material (SCM) for concrete production – a review part II, J. Clean. Prod., 142, 4178, 10.1016/j.jclepro.2015.12.115 Benhelal, 2013, Global strategies and potentials to curb CO2 emissions in cement industry, J. Clean. Prod., 51, 142, 10.1016/j.jclepro.2012.10.049 Chindaprasirt, 2004, Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar, Cement Concr. Res., 34, 1087, 10.1016/j.cemconres.2003.11.021 Chindaprasirt, 2005, Effect of fly ash fineness on compressive strength and pore size of blended cement paste, Cement Concr. Compos., 27, 425, 10.1016/j.cemconcomp.2004.07.003 Chindaprasirt, 2007, Effect of fly ash fineness on microstructure of blended cement paste, Construct. Build. Mater., 21, 1534, 10.1016/j.conbuildmat.2005.12.024 Do, 2019, Development of a new cementless binder for controlled low strength material (CLSM) using entirely by-products, Construct. Build. Mater., 206, 576, 10.1016/j.conbuildmat.2019.02.088 Do, 2018, Development of a new cementless binder for marine dredged soil stabilization: strength behavior, hydraulic resistance capacity, microstructural analysis, and environmental impact, Construct. Build. Mater., 186, 263, 10.1016/j.conbuildmat.2018.07.130 Du, 2018, Value-added utilization of marine clay as cement replacement for sustainable concrete production, J. Clean. Prod., 198, 867, 10.1016/j.jclepro.2018.07.068 Durán-Herrera, 2011, Evaluation of sustainable high-volume fly ash concretes, Cement Concr. Compos., 33, 39, 10.1016/j.cemconcomp.2010.09.020 Freidin, 2002, Stability of cementless building units based on oil shale fly ash binder in various conditions, Construct. Build. Mater., 16, 23, 10.1016/S0950-0618(01)00032-0 Freidin, 1999, Cementless building units based on oil shale and coal fly ash binder, Construct. Build. Mater., 13, 363, 10.1016/S0950-0618(99)00041-0 Gao, 2017, Evolution and projection of CO2 emissions for China’s cement industry from 1980 to 2020, Renew. Sustain. Energy Rev., 74, 522, 10.1016/j.rser.2017.02.006 Giergiczny, 2019, Fly ash and slag, Cement Concr. Res., 124, 10.1016/j.cemconres.2019.105826 Golewski, 2018, Evaluation of morphology and size of cracks of the Interfacial Transition Zone (ITZ) in concrete containing fly ash (FA), J. Hazard Mater., 357, 298, 10.1016/j.jhazmat.2018.06.016 Hsu, 2018, Effect of fineness and replacement ratio of ground fly ash on properties of blended cement mortar, Construct. Build. Mater., 176, 250, 10.1016/j.conbuildmat.2018.05.060 Huang, 2013, Mix proportions and mechanical properties of concrete containing very high-volume of Class F fly ash, Construct. Build. Mater., 46, 71, 10.1016/j.conbuildmat.2013.04.016 Kuo, 2014, Engineering properties of cementless concrete produced from GGBFS and recycled desulfurization slag, Construct. Build. Mater., 63, 189, 10.1016/j.conbuildmat.2014.04.017 Madlool, 2013, An overview of energy savings measures for cement industries, Renew. Sustain. Energy Rev., 19, 18, 10.1016/j.rser.2012.10.046 Makul, 2020, Modern sustainable cement and concrete composites: review of current status, challenges and guidelines, Sustainable Materials and Technologies, 25, 10.1016/j.susmat.2020.e00155 Mehta, 2020, Silica fume and waste glass in cement concrete production: a review, Journal of Building Engineering, 29, 100888, 10.1016/j.jobe.2019.100888 Mymrin, 2015, Microstructure and mechanical properties of cementless construction materials from thermal engineering wastes, Appl. Therm. Eng., 81, 185, 10.1016/j.applthermaleng.2015.02.029 Nežerka, 2019, Impact of silica fume, fly ash, and metakaolin on the thickness and strength of the ITZ in concrete, Cement Concr. Compos., 103, 252, 10.1016/j.cemconcomp.2019.05.012 Nidheesh, 2019, An overview of environmental sustainability in cement and steel production, J. Clean. Prod., 231, 856, 10.1016/j.jclepro.2019.05.251 Paris, 2016, A review of waste products utilized as supplements to Portland cement in concrete, J. Clean. Prod., 121, 1, 10.1016/j.jclepro.2016.02.013 Saberian, 2020, Application of demolition wastes mixed with crushed glass and crumb rubber in pavement base/subbase, Resour. Conserv. Recycl., 156, 104722, 10.1016/j.resconrec.2020.104722 Saberian, 2019, Evaluation of permanent deformation of a new pavement base and subbase containing unbound granular materials, crumb rubber and crushed glass, J. Clean. Prod., 230, 38, 10.1016/j.jclepro.2019.05.100 Shaikh, 2015, Compressive strength and durability properties of high volume fly ash (HVFA) concretes containing ultrafine fly ash (UFFA), Construct. Build. Mater., 82, 192, 10.1016/j.conbuildmat.2015.02.068 Siddique, 2011, Utilization of silica fume in concrete: review of hardened properties, Resour. Conserv. Recycl., 55, 923, 10.1016/j.resconrec.2011.06.012 Sumer, 2012, Compressive strength and sulfate resistance properties of concretes containing Class F and Class C fly ashes, Construct. Build. Mater., 34, 531, 10.1016/j.conbuildmat.2012.02.023 Tang, 2019, Review on designs and properties of multifunctional alkali-activated materials (AAMs), Construct. Build. Mater., 200, 474, 10.1016/j.conbuildmat.2018.12.157 Tang, 2019, Sulfate attack resistance of sustainable concrete incorporating various industrial solid wastes, J. Clean. Prod., 218, 810, 10.1016/j.jclepro.2019.01.337 Tang, 2020, Investigation on dynamic mechanical properties of fly ash/slag-based geopolymeric recycled aggregate concrete, Compos. B Eng., 185, 10.1016/j.compositesb.2020.107776 Toutanji, 2004, Effect of supplementary cementitious materials on the compressive strength and durability of short-term cured concrete, Cement Concr. Res., 34, 311, 10.1016/j.cemconres.2003.08.017 Wang, 2019, Investigation on the poor fluidity of electrically conductive cement-graphite paste: experiment and simulation, Mater. Des., 169, 10.1016/j.matdes.2019.107679 Wang, 2020, Reuse of hazardous electrolytic manganese residue: detailed leaching characterization and novel application as a cementitious material, Resour. Conserv. Recycl., 154, 10.1016/j.resconrec.2019.104645 Wang, 2020, Mechanical properties and chloride permeability of green concrete mixed with fly ash and coal gangue, Construct. Build. Mater., 233, 10.1016/j.conbuildmat.2019.117166 Xu, 2015, On the future of Chinese cement industry, Cement Concr. Res., 78, 2, 10.1016/j.cemconres.2015.06.012 Xu, 2018, Characteristics and applications of fly ash as a sustainable construction material: a state-of-the-art review, Resour. Conserv. Recycl., 136, 95, 10.1016/j.resconrec.2018.04.010 Yang, 2007, Development of a cementless mortar using hwangtoh binder, Build. Environ., 42, 3717, 10.1016/j.buildenv.2006.09.006 Zhang, 2013, Effectiveness of novel and traditional methods to incorporate industrial wastes in cementitious materials—an overview, Resour. Conserv. Recycl., 74, 134, 10.1016/j.resconrec.2013.03.003