3D printing with polymers: Challenges among expanding options and opportunities

Wohlers, 2015

Chuang, 2015

Hull CW inventor, UVP, Inc., assignee. Apparatus for production of three-dimensional objects by stereolithography. US Patent 4575330; 1986.

Carts, 1990, Software enables laser stereolithography, Laser Focus World, 26, 57

Kaplan, 1990, Stereolithography – a marriage of technologies, Photon Spectra, 24, 74

Neckers, 1990, Stereolithography – an introduction, Chemtech, 20, 615

Wong, 2012, A review of additive manufacturing, ISRN Mech Eng, 2012, 208760, 10.5402/2012/208760

Liska, 2007, Photopolymers for rapid prototyping, J Coatings Technol Res, 4, 505, 10.1007/s11998-007-9059-3

Infuehr, 2007, Functional polymers by two-photon 3D lithography, Appl Surface Sci, 254, 836, 10.1016/j.apsusc.2007.08.011

Sugioka, 2014, Femtosecond laser three-dimensional micro- and nanofabrication, Appl Phys Rev, 1, 041303, 10.1063/1.4904320

Belfield, 2000, Multiphoton-absorbing organic materials for microfabrication, emerging optical applications and non-destructive three-dimensional imaging, J Phys Org Chem, 13, 837, 10.1002/1099-1395(200012)13:12<837::AID-POC315>3.0.CO;2-5

Schafer, 2004, Two-photon absorption cross-sections of common photoinitiators, J Photochem Photobiol A Chem, 162, 497, 10.1016/S1010-6030(03)00394-0

Ostendorf, 2006, Two-photon polymerization: a new approach to micromachining, Photon Spectra, 40, 72

Yan, 2010, Multiphase polymeric materials for rapid prototyping and tooling technologies and their applications, Compos Interface, 17, 257, 10.1163/092764410X490680

Berg, 2014, A dual-cure, solid-state photoresist combining a thermoreversible Diels–Alder network and a chain growth acrylate network, Macromolecules, 47, 3473, 10.1021/ma500244r

Tumbleston, 2015, Continuous liquid interface production of 3D objects, Science, 347, 1349, 10.1126/science.aaa2397

Fahad, 2013, Novel polymeric support materials for jetting based additive manufacturing processes, Rapid Prototyping J, 19, 230, 10.1108/13552541311323245

Hofmann, 2014, 3D printing gets a boost and opportunities with polymer materials, ACS Macro Lett, 3, 382, 10.1021/mz4006556

Cooperstein, 2015, 3D printing of porous structures by UV-curable O/W emulsion for fabrication of conductive objects, J Mater Chem C, 3, 2040, 10.1039/C4TC02215G

Sugavaneswaran, 2015, Analytical and experimental investigation on elastic modulus of reinforced additive manufactured structure, Mater Design, 66, 29, 10.1016/j.matdes.2014.10.029

Cazon, 2014, PolyJet technology for product prototyping: tensile strength and surface roughness properties, P I Mech Eng B J Eng, 228, 1664

Jain, 2009, Effect of delay time on part strength in selective laser sintering, Int J Adv Manuf Technol, 43, 117, 10.1007/s00170-008-1682-3

Raghunath, 2007, Improving accuracy through shrinkage modelling by using Taguchi method in selective laser sintering, Int J Mach Tool Manu, 47, 985, 10.1016/j.ijmachtools.2006.07.001

Soe, 2013, Assessment of non-uniform shrinkage in the laser sintering of polymer materials, Int J Adv Manuf Technol, 68, 111, 10.1007/s00170-012-4712-0

Dotchev, 2009, Recycling of polyamide 12 based powders in the laser sintering process, Rapid Prototyping J, 15, 192, 10.1108/13552540910960299

Drummer, 2014, Influence of energy input on degradation behavior of plastic components manufactured by selective laser melting, Phys Procedia, 56, 176, 10.1016/j.phpro.2014.08.160

Goodridge, 2012, Laser sintering of polyamides and other polymers, Prog Mater Sci, 57, 229, 10.1016/j.pmatsci.2011.04.001

Riedlbauer, 2014, Modelling, simulation and experimental validation of heat transfer in selective laser melting of the polymeric material PA12, Comp Mater Sci, 93, 239, 10.1016/j.commatsci.2014.06.046

Majewski, 2008, Effect of the degree of particle melt on mechanical properties in selective laser sintered Nylon-12 parts, P I Mech Eng B J Eng, 222, 1055

Jones, 2015, Additive manufacturing under pressure, Rapid Prototyping J, 21, 89, 10.1108/RPJ-02-2013-0016

Dupin, 2012, Microstructural origin of physical and mechanical properties of polyamide 12 processed by laser sintering, Eur Polym J, 48, 1611, 10.1016/j.eurpolymj.2012.06.007

Kruth, 2007, Consolidation phenomena in laser and powder-bed based layered manufacturing, CIRP Ann Manuf Technnol, 56, 730, 10.1016/j.cirp.2007.10.004

Yan, 2010, Investigation into the selective laser sintering of styrene-acrylonitrile copolymer and postprocessing, Int J Adv Manuf Technol, 51, 973, 10.1007/s00170-010-2681-8

Yan, 2011, Investigation into the differences in the selective laser sintering between amorphous and semi-crystalline polymers, Int Polym Proc, 26, 416, 10.3139/217.2452

Polzin, 2013, Characterization and evaluation of a PMMA-based 3D printing process, Rapid Prototyping J, 19, 37, 10.1108/13552541311292718

Floersheim, 2009, CFPC material characteristics and SLS prototyping process, Rapid Prototyping J, 15, 339, 10.1108/13552540910993860

Schmid, 2014, Materials perspective of polymers for additive manufacturing with selective laser sintering, J Mater Res, 29, 1824, 10.1557/jmr.2014.138

Ajoku, 2006, Investigating mechanical anisotropy and end-of-vector effect in laser-sintered nylon parts, P I Mech Eng B J Eng, 220, 1077

Shaffer, 2014, On reducing anisotropy in 3D printed polymers via ionizing radiation, Polymer, 55, 5969, 10.1016/j.polymer.2014.07.054

Yang, 2014, Novel polymers for 3D printing with improved interlayer adhesion by reversible Diels–Alder reactions, Abstr Pap Am Chem S, 248

Rocha, 2014, Novel ABS-based binary and ternary polymer blends for material extrusion 3D printing, J Mater Res, 29, 1859, 10.1557/jmr.2014.158

Hunt, 2015, Polymer recycling codes for distributed manufacturing with 3-D printers, Resour Conserv Recy, 97, 24, 10.1016/j.resconrec.2015.02.004

Compton, 2014, 3D-printing of lightweight cellular composites, Adv Mater, 26, 5930, 10.1002/adma.201401804

Turner, 2014, A review of melt extrusion additive manufacturing processes: I. Process design and modeling, Rapid Prototyping J, 20, 192, 10.1108/RPJ-01-2013-0012

Farahani, 2014, Processing parameters investigation for the fabrication of self-supported and freeform polymeric microstructures using ultraviolet-assisted three-dimensional printing, J Micromech Microeng, 24, 055020, 10.1088/0960-1317/24/5/055020

Office of Energy Efficiency and Renewable Energy at http://energy.gov/eere/amo/3d-printed-shelby-cobra [accessed June 2015].

Visser, 2015, Reinforcement of hydrogels using three-dimensionally printed microfibres, Nat Commun, 6, 6933, 10.1038/ncomms7933

Zheng, 2014, Electrohydrodynamic direct-writing of three-dimensional multi-loop nanofibrous coils, Appl Phys A, 116, 171, 10.1007/s00339-014-8264-z

Brown, 2014, Melt electrospinning of poly(ɛ-caprolactone) scaffolds: phenomenological observations associated with collection and direct writing, Mater Sci Eng C, 45, 698, 10.1016/j.msec.2014.07.034

Klosterman, 1998, Interfacial characteristics of composites fabricated by laminated object manufacturing, Composites Part A Appl S, 29, 1165, 10.1016/S1359-835X(98)00088-8

Murphy, 2014, 3D bioprinting of tissues and organs, Nat Biotechnol, 32, 773, 10.1038/nbt.2958

Seliktar, 2013, Bioprinting and tissue engineering: recent advances and future perspectives, Isr J Chem, 53, 795, 10.1002/ijch.201300084

Xu, 2013, Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology, Biomaterials, 34, 130, 10.1016/j.biomaterials.2012.09.035

Lee, 2014, Generation of multi-scale vascular network system within 3D hydrogel using 3D bio-printing technology, Cell Mol Bioeng, 7, 460, 10.1007/s12195-014-0340-0

Paulsen, 2015, Tissue vascularization through 3D printing: will technology bring us flow?, Dev Dynam, 244, 29, 10.1002/dvdy.24254

Bohner, 2011, Deciphering the link between architecture and biological response of a bone graft substitute, Acta Biomater, 7, 478, 10.1016/j.actbio.2010.08.008

Serra, 2013, 3D printed PLA-based scaffolds: a versatile tool in regenerative medicine, Organogenesis, 9, 239, 10.4161/org.26048

Elomaa, 2011, Preparation of poly(epsilon-caprolactone)-based tissue engineering scaffolds by stereolithography, Acta Biomater, 7, 3850, 10.1016/j.actbio.2011.06.039

Gross, 2014, Evaluation of 3D printing and its potential impact on biotechnology and the chemical sciences, Anal Chem, 86, 3240, 10.1021/ac403397r

Rasperini, 2015, 3D-printed bioresorbable scaffold for periodontal repair, J Dent Res, 94

Flugge, 2013, Three-dimensional plotting and printing of an implant drilling guide: simplifying guided implant surgery, J Oral Maxil Surg, 71, 1340, 10.1016/j.joms.2013.04.010

Martorelli, 2013, A comparison between customized clear and removable orthodontic appliances manufactured using RP and CNC techniques, Dent Mater, 29, E1, 10.1016/j.dental.2012.10.011

Anderson, 2014, Application of three-dimensional computed tomography in craniofacial clinical practice and research, Aust Dent J, 59, 174, 10.1111/adj.12154

Cohen, 2009, Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology, Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 108, 661, 10.1016/j.tripleo.2009.05.023

Kfir, 2013, The diagnosis and conservative treatment of a complex type 3 dens invaginatus using cone beam computed tomography (CBCT) and 3D plastic models, Int Endod J, 46, 275, 10.1111/iej.12013

Water, 2015, Three-dimensional printing of drug-eluting implants: preparation of an antimicrobial polylactide feedstock material, J Pharm Sci, 104, 1099, 10.1002/jps.24305

Katakam, 2015, Top-down and bottom-up approaches in 3D printing technologies for drug delivery challenges, Crit Rev Ther Drug, 32, 61, 10.1615/CritRevTherDrugCarrierSyst.2014011157

Kasparova, 2013, Possibility of reconstruction of dental plaster cast from 3D digital study models, Biomed Eng Online, 12, 49, 10.1186/1475-925X-12-49

Hoang, 2015, Die spacer thickness reproduction for central incisor crown fabrication with combined computer-aided design and 3D printing technology: an in vitro study, J Prosthet Dent, 113, 398, 10.1016/j.prosdent.2014.11.004

Kim, 2008, A benchmark study on rapid prototyping processes and machines: quantitative comparisons of mechanical properties, accuracy, roughness, speed, and material cost, P I Mech Eng B J Eng, 222, 201

F2792/12a A, 2012

Moylan, 2014, An additive manufacturing test artifact, J Res Natl Inst Stan, 119, 429, 10.6028/jres.119.017

Gebler, 2014, A global sustainability perspective on 3D printing technologies, Energy Policy, 74, 158, 10.1016/j.enpol.2014.08.033

Weller, 2015, Economic implications of 3D printing: market structure models in light of additive manufacturing revisited, Int J Prod Econ, 164, 43, 10.1016/j.ijpe.2015.02.020