3D printing of hydroxyapatite/tricalcium phosphate scaffold with hierarchical porous structure for bone regeneration
Tóm tắt
Từ khóa
Tài liệu tham khảo
Basu B (2017) Natural bone and tooth: structure and properties. In: Basu B, Ghosh S (eds) Biomaterials for musculoskeletal regeneration. Springer, Singapore, pp 45–85
Wang Q et al (2017) Artificial periosteum in bone defect repair—a review. Chin Chem Lett 28(9):1801–1807
Yu JC et al (1996) An experimental study of the effects of craniofacial growth on the long-term positional stability of microfixation. J Craniofacial Surg 7(1):64–68
Stelnicki EJ, Hoffman W (1998) Intracranial migration of microplates versus wires in neonatal pigs after frontal advancement. J Craniofacial Surg 9(1):60–64
Macchetta A, Turner IG, Bowen CR (2009) Fabrication of HA/TCP scaffolds with a graded and porous structure using a camphene-based freeze-casting method. Acta Biomater 5(4):1319–1327
Miao X et al (2008) Mechanical and biological properties of hydroxyapatite/tricalcium phosphate scaffolds coated with poly (lactic-co-glycolic acid). Acta Biomater 4(3):638–645
Ho CMB, Ng SH, Yoon Y-J (2015) A review on 3D printed bioimplants. Int J Precis Eng Manuf 16(5):1035–1046
Bose S, Vahabzadeh S, Bandyopadhyay A (2013) Bone tissue engineering using 3D printing. Mater Today 16(12):496–504
Rengier F et al (2010) 3D printing based on imaging data: review of medical applications. Int J Comput Assist Radiol Surg 5(4):335–341
Kim S-S et al (2006) Poly (lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering. Biomaterials 27(8):1399–1409
Sato M et al (2006) Increased osteoblast functions on undoped and yttrium-doped nanocrystalline hydroxyapatite coatings on titanium. Biomaterials 27(11):2358–2369
Shao H et al (2017) Bone regeneration in 3D printing bioactive ceramic scaffolds with improved tissue/material interface pore architecture in thin-wall bone defect. Biofabrication 9(2):025003
Xu S et al (2017) Effects of HAp and TCP in constructing tissue engineering scaffolds for bone repair. J Mater Chem B 5(30):6110–6118
Cao H, Kuboyama N (2010) A biodegradable porous composite scaffold of PGA/β-TCP for bone tissue engineering. Bone 46(2):386–395
Rakovsky A et al (2014) β-TCP-polylactide composite scaffolds with high strength and enhanced permeability prepared by a modified salt leaching method. J Mech Behav Biomed Mater 32:89–98
Nakahira A et al (2005) Fabrication of porous hydroxyapatite using hydrothermal hot pressing and post-sintering. J Am Ceram Soc 88(5):1334–1336
Zhou S et al (2011) Fabrication of hydroxyapatite/ethylene-vinyl acetate/polyamide 66 composite scaffolds by the injection-molding method. Polym Plast Technol Eng 50(10):1047–1054
Bose S et al (2003) Pore size and pore volume effects on alumina and TCP ceramic scaffolds. Mater Sci Eng, C 23(4):479–486
Tarafder S et al (2015) SrO-and MgO-doped microwave sintered 3D printed tricalcium phosphate scaffolds: mechanical properties and in vivo osteogenesis in a rabbit model. J Biomed Mater Res Part B Appl Biomater 103(3):679–690
Tarafder S et al (2013) Microwave-sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering. J Tissue Eng Regen Med 7(8):631–641
Zeng Y et al (2018) 3D printing of hydroxyapatite scaffolds with good mechanical and biocompatible properties by digital light processing. J Mater Sci 53(9):6291–6301
Huang W et al (2013) Fabrication of HA/β-TCP scaffolds based on micro-syringe extrusion system. Rapid Prototyp J 19(5):319–326
Nyberg E et al (2017) Comparison of 3D-printed poly-ɛ-caprolactone scaffolds functionalized with tricalcium phosphate, hydroxyapatite, bio-oss, or decellularized bone matrix. Tissue Eng Part A 23(11–12):503–514
Leukers B et al (2005) Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing. J Mater Sci Mater Med 16(12):1121–1124
Cox SC et al (2015) 3D printing of porous hydroxyapatite scaffolds intended for use in bone tissue engineering applications. Mater Sci Eng, C 47:237–247
Wu C et al (2015) Graphene-oxide-modified β-tricalcium phosphate bioceramics stimulate in vitro and in vivo osteogenesis. Carbon 93:116–129
Kon E et al (2000) Autologous bone marrow stromal cells loaded onto porous hydroxyapatite ceramic accelerate bone repair in critical-size defects of sheep long bones. J Biomed Mater Res 49(3):328–337
Kim J et al (2012) Rapid-prototyped PLGA/β-TCP/hydroxyapatite nanocomposite scaffolds in a rabbit femoral defect model. Biofabrication 4(2):025003
Witek L (2015) Extrusion-based, three-dimensional printing of calcium-phosphate scaffolds. Dissertation of Oklahoma State University
Diogo GS et al (2014) Manufacture of β-TCP/alginate scaffolds through a Fab@ home model for application in bone tissue engineering. Biofabrication 6(2):025001
He F et al (2017) Fabrication of β-tricalcium phosphate composite ceramic sphere-based scaffolds with hierarchical pore structure for bone regeneration. Biofabrication 9(2):025005
Castilho M et al (2014) Direct 3D powder printing of biphasic calcium phosphate scaffolds for substitution of complex bone defects. Biofabrication 6(1):015006
Zhang Y et al (2017) 3D-printed bioceramic scaffolds with antibacterial and osteogenic activity. Biofabrication 9(2):025037
Trombetta R et al (2017) 3D printing of calcium phosphate ceramics for bone tissue engineering and drug delivery. Ann Biomed Eng 45(1):23–44
Castilho M et al (2015) Fabrication of individual alginate-TCP scaffolds for bone tissue engineering by means of powder printing. Biofabrication 7(1):015004
Nadeem D et al (2015) Three-dimensional CaP/gelatin lattice scaffolds with integrated osteoinductive surface topographies for bone tissue engineering. Biofabrication 7(1):015005
Di Luca A et al (2016) Toward mimicking the bone structure: design of novel hierarchical scaffolds with a tailored radial porosity gradient. Biofabrication 8(4):045007
Yang Y et al (2018) Recent progress in biomimetic additive manufacturing technology: from materials to functional structures. Adv Mater 30(36):1706539
Holmes B et al (2016) A synergistic approach to the design, fabrication and evaluation of 3D printed micro and nano featured scaffolds for vascularized bone tissue repair. Nanotechnology 27(6):064001
Salerno A et al (2017) Synthetic scaffolds with full pore interconnectivity for bone regeneration prepared by supercritical foaming using advanced biofunctional plasticizers. Biofabrication 9(3):035002
Yang J-Z et al (2015) Structure design and manufacturing of layered bioceramic scaffolds for load-bearing bone reconstruction. Biomed Mater 10(4):045006
Yang Y et al (2018) 3D-printed biomimetic super-hydrophobic structure for microdroplet manipulation and oil/water separation. Adv Mater 30(9):1704912
Li X, Chen Y (2017) Micro-scale feature fabrication using immersed surface accumulation. J Manuf Process 28:531–540
Li X et al (2018) Mask video projection based stereolithography with continuous resin flow to build digital models in minutes. In: ASME 2018 13th international manufacturing science and engineering conference. American Society of Mechanical Engineers
Zhou C, Chen Y, Waltz RA (2009) Optimized mask image projection for solid freeform fabrication. In: ASME 2009 international design engineering technical conferences and computers and information in engineering conference. American Society of Mechanical Engineers
Li X et al (2018) 3D printing temporary crown and bridge by temperature controlled mask image projection stereolithography. Procedia Manuf 26:1023–1033
Zhou C et al (2013) Digital material fabrication using mask-image-projection-based stereolithography. Rapid Prototyp J 19(3):153–165
Song X et al (2015) Ceramic fabrication using mask-image-projection-based stereolithography integrated with tape-casting. J Manuf Process 20:456–464
Song X et al (2017) Piezoelectric component fabrication using projection-based stereolithography of barium titanate ceramic suspensions. Rapid Prototyp J 23(1):44–53
Frisch U, Hasslacher B, Pomeau Y (1986) Lattice-gas automata for the Navier–Stokes equation. Phys Rev Lett 56(14):1505
Jacobs PF (1992) Rapid prototyping & manufacturing: fundamentals of stereolithography. Society of Manufacturing Engineers, Dearborn
Griffith ML, Halloran JW (1993) Freeform fabrication of ceramics via stereolithography. J Am Ceram Soc 79(10):2601–2608
Song X et al (2017) Porous structure fabrication using a stereolithography-based sugar foaming method. J Manuf Sci Eng 139(3):031015
Hamad AJ (2017) Size and shape effect of specimen on the compressive strength of HPLWFC reinforced with glass fibres. J King Saud Univ Eng Sci 29(4):373–380
Jordan MM et al (2008) Influence of firing temperature and mineralogical composition on bending strength and porosity of ceramic tile bodies. Appl Clay Sci 42(1–2):266–271
Deng XG et al (2016) Effects of firing temperature on the microstructures and properties of porous mullite ceramics prepared by foam-gelcasting. Adv Appl Ceram 115(4):204–209
Rice RW (1993) Comparison of stress concentration versus minimum solid area based mechanical property-porosity relations. J Mater Sci 28(8):2187–2190
Heunisch A, Dellert A, Roosen A (2010) Effect of powder, binder and process parameters on anisotropic shrinkage in tape cast ceramic products. J Eur Ceram Soc 30(16):3397–3406
Boccaccini AR, Trusty PA (1998) In situ characterization of the shrinkage behavior of ceramic powder compacts during sintering by using heating microscopy. Mater Charact 41(4):109–121
Hollister SJ (2009) Scaffold design and manufacturing: from concept to clinic. Adv Mater 21(32–33):3330–3342
Kwok T-H et al (2017) Mass customization: reuse of digital slicing for additive manufacturing. J Comput Inf Sci Eng 17(2):021009
Xu K, Kwok T-H, Chen Y (2016) A reverse compensation framework for shape deformation in additive manufacturing. In: ASME 2016 11th international manufacturing science and engineering conference. American Society of Mechanical Engineers
Leung Y-S et al (2019) Challenges and status on design and computation for emerging additive manufacturing technologies. J Comput Inf Sci Eng 19(2):021013
Chung I-H et al (2009) Stem cell property of postmigratory cranial neural crest cells and their utility in alveolar bone regeneration and tooth development. Stem Cells 27(4):866–877