3D printing of continuous flax fibre reinforced biocomposites for structural applications
Tóm tắt
Từ khóa
Tài liệu tham khảo
Ngo, 2018, Additive manufacturing (3D printing): a review of materials, methods, applications and challenges
Wang, 2017, 3D printing of polymer matrix composites: a review and prospective, Compos Part B Eng, 110, 442, 10.1016/j.compositesb.2016.11.034
Faruk, 2012, Biocomposites reinforced with natural fibers: 2000–2010, Prog. Polym. Sci., 37, 1552, 10.1016/j.progpolymsci.2012.04.003
Le Duigou A, Davies P, C. B. substitution of glass/polyester composites by flax/PLLA biocomposites. Is is justified ? J Biobased Mater Bioenergy 2011;5:466–82.
Mohanty, 2002, Sustainable bio-composites from renewable resources, J. Polym. Environ., 10, 19, 10.1023/A:1021013921916
Pickering, 2016, A review of recent developments in natural fibre composites and their mechanical performance, Compos Part A Appl Sci Manuf, 83, 98, 10.1016/j.compositesa.2015.08.038
Ibrahim, 2014, Sustainable natural bio composite for FDM feedstocks, Appl. Mech. Mater., 607, 65, 10.4028/www.scientific.net/AMM.607.65
Kariz, 2017, Effect of wood content in FDM filament on properties of 3D printed parts, Mater. Today, 14
Milosevic, 2017, Characterizing the mechanical properties of fused deposition modelling natural fiber recycled polypropylene composites, J Compos Sci, 1, 7, 10.3390/jcs1010007
Stoof, 2017, Fused deposition modelling of natural fibre/polylactic acid composites, J Compos Sci, 1, 8, 10.3390/jcs1010008
Goh, 2019, Recent progress in additive manufacturing of fiber reinforced polymer composite, AdvMater Technol, 4
Li, 2016, Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing, J. Mater. Process. Technol., 238, 218, 10.1016/j.jmatprotec.2016.07.025
Matsuzaki, 2016, Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation, Sci. Rep., 6, 10.1038/srep23058
Yang, 2017, 3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance, Rapid Prototyp. J., 23, 10.1108/RPJ-08-2015-0098
Chabaud, 2019, Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applications, Addit Manuf, 26, 94
Goh, 2018, Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics, Mater. Des., 137, 79, 10.1016/j.matdes.2017.10.021
Dickson, 2017, Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing, Addit Manuf, 16, 146
Baley, 2018, Compressive and tensile behaviour of unidirectional composites reinforced by natural fibres: influence of fibres (flax and jute), matrix and fibre volume fraction, Mater Today Commun, 10.1016/j.mtcomm.2018.07.003
Baley, 2014, Average tensile properties of French elementary flax fibers, Mater. Lett., 122, 159, 10.1016/j.matlet.2014.02.030
Shah, 2015, Damage in biocomposites: stiffness evolution of aligned plant fibre composites during monotonic and cyclic fatigue loading, Compos Part A Appl Sci Manuf
Le Duigou, 2016, 3D printing of wood fibre biocomposites: from mechanical to actuation functionality, Mater. Des., 96, 106, 10.1016/j.matdes.2016.02.018
Filgueira, 2018, AT. Echtermeyer GC-C. 3D printable filaments made of biobased polyethylene biocomposites, Polymers (Basel), 10, 314, 10.3390/polym10030314
Cherif, 2016, About optimal architecture of plant fibre textile composite for mechanical and sorption properties, Compos. Struct., 140, 240, 10.1016/j.compstruct.2015.12.030
Baley, 2012, Influence of drying on the mechanical behaviour of flax fibres and their unidirectional composites, Compos Part A Appl Sci Manuf, 43, 1226, 10.1016/j.compositesa.2012.03.005
Bourmaud, 2016, Influence of processing temperature on mechanical performance of unidirectional polyamide 11 - flax fibre composites, Ind. Crop. Prod., 84, 151, 10.1016/j.indcrop.2016.02.007
Placet, 2014, Nonlinear tensile behaviour of elementary hemp fibres. Part I: investigation of the possible origins using repeated progressive loading with in situ microscopic observations, Compos Part A Appl Sci Manuf, 56, 319, 10.1016/j.compositesa.2012.11.019
Monti, 2016, Mechanical behaviour and damage mechanisms analysis of a flax-fibre reinforced composite by acoustic emission, Compos Part A Appl Sci Manuf, 90, 100, 10.1016/j.compositesa.2016.07.002
Le Duigou, 2014, A multi-scale study of the interface between natural fibres and a biopolymer, Compos Part A Appl Sci Manuf, 65, 10.1016/j.compositesa.2014.06.010
Letcher, 2014, Material property testing of 3D printed specimen in PLA on an entry-level 3D printer
Stoof, 2017, 3D printing of natural fibre reinforced recycled polypropylene, Process Fabr Adv Mater, 668
Safka, 2016, Use of composite materials for FDM 3D print technology, Mater. Sci. Forum, 862, 174, 10.4028/www.scientific.net/MSF.862.174
Torrado, 2016, Failure analysis and anisotropy evaluation of 3D-printed tensile test specimens of different geometries and print raster patterns, J. Fail. Anal. Prev., 16, 154, 10.1007/s11668-016-0067-4
Depuydt, 2018, Production and characterization of bamboo and flax fiber reinforced polylactic acid filaments for fused deposition modeling (FDM), Polym. Compos.
Kariz, 2018, Effect of wood content in FDM filament on properties of 3D printed parts, Mater Today Commun, 14, 135, 10.1016/j.mtcomm.2017.12.016
Stoof, 2017, Fused deposition modelling of natural fibre/Polylactic acid composites, J Compos Sci, 1, 8, 10.3390/jcs1010008
Stoof, 2018, Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene, Compos Part B Eng, 135, 110, 10.1016/j.compositesb.2017.10.005
Torrado Perez, 2014, Fracture surface analysis of 3D printed tensiles specimens of novel ABS based materials, J Fail Anal Preven, 14, 343, 10.1007/s11668-014-9803-9
Tarrés, 2018, Bio-polyethylene reinforced with thermomechanical pulp fibers: mechanical and micromechanical characterization and its application in 3D-printing by fused deposition modelling, Compos Part B Eng, 153, 10, 10.1016/j.compositesb.2018.07.009
Yang, 2018, Effect of extrusion temperature on the physico-mechanical properties of unidirectional wood fiber reinforced polylactic acid composite (WFRPC) components using fused deposition modeling, Polymers (Basel), 10, 1, 10.3390/polym10090976
Van Der Klift, 2016, 3D printing of continuous carbon fibre reinforced thermo-plastic (CFRTP) tensile test specimens, Open J Compos Mater, 06, 18, 10.4236/ojcm.2016.61003
Justo, 2018, Characterization of 3D printed longfibre reinforced composites, Compos. Struct., 185, 537, 10.1016/j.compstruct.2017.11.052
Tian, 2017, Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites, J. Clean. Prod., 142, 1609, 10.1016/j.jclepro.2016.11.139
Coroller, 2013, Effect of flax fibres individualisation on tensile failure of flax/epoxy unidirectional composite, Compos Part A Appl Sci Manuf, 51, 10.1016/j.compositesa.2013.03.018
Baley, 2016, Flax/PP manufacture by automated fibre placement (AFP), Mater. Des., 94, 207, 10.1016/j.matdes.2016.01.011
Liang, 2015, Quasi-static behaviour and damage assessment of flax/epoxy composites, Mater. Des., 67, 344, 10.1016/j.matdes.2014.11.048
Lefeuvre, 2015, Optimization of the mechanical performance of UD flax/epoxy composites by selection of fibres along the stem, Compos Part A Appl Sci Manuf, 77, 204, 10.1016/j.compositesa.2015.07.009
Cadu, 2018, What are the key parameters to produce a high-grade bio-based composite? Application to flax/epoxy UD laminates produced by thermocompression, Compos Part B Eng, 150, 36, 10.1016/j.compositesb.2018.04.059
Van de Weyenberg, 2003, Influence of processing and chemical treatment of flax fibres on their composites, Compos. Sci. Technol., 63, 1241, 10.1016/S0266-3538(03)00093-9
Baets, 2014, Determination of the optimal flax fibre preparation for use in unidirectional flax–epoxy composites, J. Reinf. Plast. Compos., 33, 493, 10.1177/0731684413518620
Bensadoun, 2017, Impregnated fibre bundle test for natural fibres used in composites, J. Reinf. Plast. Compos., 36, 942, 10.1177/0731684417695461