3D printing of ceramics: A review
Tóm tắt
Từ khóa
Tài liệu tham khảo
Bengisu, 2013
Gibson, 2014
Marcus, 1990, Solid freeform fabrication-powder processing, American Ceramic Society Bulletin, 69, 1030
Sachs, 1990, Three-dimensional printing: rapid tooling and prototypes directly from a CAD model, CIRP Annals-Manufacturing Technology, 39, 201, 10.1016/S0007-8506(07)61035-X
Jacobs, 1992
Hull, 1986
ISO/ASTM, 17296 Standard on Additive Manufacturing (AM) Technologies.
Griffith, 1996, Freeform fabrication of ceramics via stereolithography, Journal of the American Ceramic Society, 79, 2601, 10.1111/j.1151-2916.1996.tb09022.x
Chen, 2010, Curing characteristics of ceramic stereolithography for an aqueous-based silica suspension, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224, 641, 10.1243/09544054JEM1751
Lombardo, 2015, Minimum Time Heating Cycles for Diffusion‐Controlled Binder Removal from Ceramic Green Bodies, Journal of the American Ceramic Society, 98, 57, 10.1111/jace.13284
Wu, 2009, Rapid fabrication of alumina-based ceramic cores for gas turbine blades by stereolithography and gelcasting, J Mater Process Tech, 209, 5886, 10.1016/j.jmatprotec.2009.07.002
Griffith, 1994, 529
Allen Brady, 1997, Stereolithography of ceramic suspensions, Rapid Prototyping Journal, 3, 61, 10.1108/13552549710176680
Halloran, 2011, Photopolymerization of powder suspensions for shaping ceramics, Journal of the European Ceramic Society, 31, 2613, 10.1016/j.jeurceramsoc.2010.12.003
Bae, 2018, Quantifying particle segregation in sequential layers fabricated by additive manufacturing, Journal of the European Ceramic Society, 10.1016/j.jeurceramsoc.2018.02.008
Gentry, 2013, Depth and width of cured lines in photopolymerizable ceramic suspensions, Journal of the European Ceramic Society, 33, 1981, 10.1016/j.jeurceramsoc.2013.02.033
Zimbeck, 1996, 411
de Hazan, 2017, SiC and SiOC ceramic articles produced by stereolithography of acrylate modified polycarbosilane systems, Journal of the European Ceramic Society, 37, 5205, 10.1016/j.jeurceramsoc.2017.03.021
Badev, 2011, Photopolymerization kinetics of a polyether acrylate in the presence of ceramic fillers used in stereolithography, Journal of Photochemistry and Photobiology A: Chemistry, 222, 117, 10.1016/j.jphotochem.2011.05.010
Wozniak, 2009, Highly loaded UV curable nanosilica dispersions for rapid prototyping applications, Journal of the European Ceramic Society, 29, 2259, 10.1016/j.jeurceramsoc.2009.01.030
Hinczewski, 1998, Ceramic suspensions suitable for stereolithography, Journal of the European Ceramic Society, 18, 583, 10.1016/S0955-2219(97)00186-6
Xing, 2017, Study on surface quality, precision and mechanical properties of 3D printed ZrO2 ceramic components by laser scanning stereolithography, Ceramics International, 43, 16340, 10.1016/j.ceramint.2017.09.007
Bae, 2008
Zhou, 2010, Direct fabrication of an integral ceramic mould by stereolithography, P I Mech Eng B-J Eng, 224, 237
Chen, 2012, Process parameters appraisal of fabricating ceramic parts based on stereolithography using the Taguchi method, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226, 1249, 10.1177/0954405412442607
Nguyen, 2010, Design and characterization of 60-GHz integrated lens antennas fabricated through ceramic stereolithography, IEEE Transactions on Antennas and Propagation, 58, 2757, 10.1109/TAP.2010.2050447
Leigh, 2011, A miniature flow sensor fabricated by micro-stereolithography employing a magnetite/acrylic nanocomposite resin, Sensors and Actuators A: Physical, 168, 66, 10.1016/j.sna.2011.03.058
Chen, 2007, Fabrication and Measurement of Micro Three‐Dimensional Photonic Crystals of SiO2 Ceramic for Terahertz Wave Applications, Journal of the American Ceramic Society, 90, 2078, 10.1111/j.1551-2916.2007.01676.x
Kirihara, 2015, Three‐Dimensional Stereolithography of Alumina Photonic Crystals for Terahertz Wave Localization, International Journal of Applied Ceramic Technology, 12, 32, 10.1111/ijac.12320
Scalera, 2014, Development and characterization of UV curable epoxy/hydroxyapatite suspensions for stereolithography applied to bone tissue engineering, Ceramics International, 40, 15455, 10.1016/j.ceramint.2014.06.117
Du, 2014, Fabrication and perfusion culture of anatomically shaped artificial bone using stereolithography, Biofabrication, 6, 10.1088/1758-5082/6/4/045002
Sarment, 2003, Stereolithographic surgical templates for placement of dental implants in complex cases, International Journal of Periodontics & Restorative Dentistry, 23
Lian, 2018, Additive manufacturing of ZrO2 ceramic dental bridges by stereolithography, Rapid Prototyping Journal, 24, 114, 10.1108/RPJ-09-2016-0144
Bae, 2011, Influence of residual monomer on cracking in ceramics fabricated by stereolithography, International Journal of Applied Ceramic Technology, 8, 1289, 10.1111/j.1744-7402.2010.02578.x
Mitteramskogler, 2014, Light curing strategies for lithography-based additive manufacturing of customized ceramics, Additive Manufacturing, 1, 110, 10.1016/j.addma.2014.08.003
Pfaffinger, 2015, Thermal Debinding of Ceramic-Filled Photopolymers, Materials Science Forum, Trans Tech Publ, 75
Colombo, 2010, Polymer‐derived ceramics: 40 years of research and innovation in advanced ceramics, Journal of the American Ceramic Society, 93, 1805, 10.1111/j.1551-2916.2010.03876.x
Eckel, 2016, Additive manufacturing of polymer-derived ceramics, Science, 351, 58, 10.1126/science.aad2688
Toma, 2012, Correlation Between Intrinsic Microstructure and Piezoresistivity in a SiOC Polymer‐Derived Ceramic, Journal of the American Ceramic Society, 95, 1056, 10.1111/j.1551-2916.2011.04944.x
Colombo, 2013, Multifunctional advanced ceramics from preceramic polymers and nano-sized active fillers, Journal of the European Ceramic Society, 33, 453, 10.1016/j.jeurceramsoc.2012.10.006
Kim, 2015, Electrical conductivity of dense, bulk silicon-oxycarbide ceramics, Journal of the European Ceramic Society, 35, 1355, 10.1016/j.jeurceramsoc.2014.12.007
Fu, 2018, Multiple metals doped polymer-derived SiOC ceramics for 3D printing, Ceramics International, 44, 11030, 10.1016/j.ceramint.2018.03.075
Zanchetta, 2016, Stereolithography of SiOC ceramic microcomponents, Adv Mater, 28, 370, 10.1002/adma.201503470
Nakamoto, 1996, Consideration on the producing of high aspect ratio micro parts using UV sensitive photopolymer, Micro Machine and Human Science, 1996, Proceedings of the Seventh International Symposium, 53
Bertsch, 1997, Microstereophotolithography using a liquid crystal display as dynamic mask-generator, Microsystem Technologies, 3, 42, 10.1007/s005420050053
Kaneko, 2001, 1339
Hadipoespito, 2003, Solid Freeform Fabrication Symposium, Austin, TXDigital Micromirror device based microstereolithography for micro structures of transparent photopolymer and nanocomposites,2003, Digital Micromirror device based microstereolithography for micro structures of transparent photopolymer and nanocomposites, 13
Sun, 2005, Projection micro-stereolithography using digital micro-mirror dynamic mask, Sensors and Actuators A: Physical, 121, 113, 10.1016/j.sna.2004.12.011
Hornbeck, 1997, Digital light processing for high-brightness high-resolution applications, Projection Displays III, International Society for Optics and Photonics, 27
Hornbeck, 1996, Multi-level digital micromirror device, Google Patents
Dudley, 2003, Emerging digital micromirror device (DMD) applications, MOEMS display and imaging systems, International Society for Optics and Photonics, 14
Zhou, 2009, Calibrating large-area mask projection stereolithography for its accuracy and resolution improvements, Proceedings of Solid Freeform Fabrication Symposium, Austin
Choi, 2009, Fabrication of 3D biocompatible/biodegradable micro-scaffolds using dynamic mask projection microstereolithography, J Mater Process Tech, 209, 5494, 10.1016/j.jmatprotec.2009.05.004
Pan, 2012, A fast mask projection stereolithography process for fabricating digital models in minutes, Journal of Manufacturing Science and Engineering, 134, 10.1115/1.4007465
Zhang, 2012, Rapid fabrication of complex 3D extracellular microenvironments by dynamic optical projection stereolithography, Adv Mater, 24, 4266, 10.1002/adma.201202024
Lee, 2015, Development of a 3D printer using scanning projection stereolithography, Scientific reports, 5, 9875, 10.1038/srep09875
He, 2018, Fabrication of complex-shaped zirconia ceramic parts via a DLP- stereolithography-based 3D printing method, Ceramics International, 44, 3412, 10.1016/j.ceramint.2017.11.135
Zhou, 2016, Preparation of a defect-free alumina cutting tool via additive manufacturing based on stereolithography – Optimization of the drying and debinding processes, Ceramics International, 42, 11598, 10.1016/j.ceramint.2016.04.050
Felzmann, 2012, Lithography‐Based Additive Manufacturing of Cellular Ceramic Structures, Advanced Engineering Materials, 14, 1052, 10.1002/adem.201200010
Tesavibul, 2012, Processing of 45S5 Bioglass® by lithography-based additive manufacturing, Materials Letters, 74, 81, 10.1016/j.matlet.2012.01.019
Hatzenbichler, 2012, DLP-based light engines for additive manufacturing of ceramic parts, Emerging Digital Micromirror Device Based Systems and Applications IV, International Society for Optics and Photonics, 82540E
Gmeiner, 2015, Stereolithographic ceramic manufacturing of high strength bioactive glass, International Journal of Applied Ceramic Technology, 12, 38, 10.1111/ijac.12325
Schwentenwein, 2015, Additive manufacturing of dense alumina ceramics, International Journal of Applied Ceramic Technology, 12, 1, 10.1111/ijac.12319
Schwentenwein, 2014, Lithography-based ceramic manufacturing: a novel technique for additive manufacturing of high-performance ceramics, Advances in Science and Technology, Trans Tech Publ, 60
Scheithauer, 2015, Micro‐Reactors Made by Lithography‐Based Ceramic Manufacturing (LCM), Additive Manufacturing and Strategic Technologies in Advanced Ceramics: Ceramic Transactions, Volume, 258, 31
Scheithauer, 2018, Additive Manufacturing of Ceramic Heat Exchanger: Opportunities and Limits of the Lithography-Based Ceramic Manufacturing (LCM), J Mater Eng Perform, 27, 14, 10.1007/s11665-017-2843-z
Lantada, 2016, Lithography-based ceramic manufacture (LCM) of auxetic structures: present capabilities and challenges, Smart Materials and Structures, 25, 10.1088/0964-1726/25/5/054015
Varadan, 2001
Sun, 2004, 169
Lee, 2008, Advances in 3D nano/microfabrication using two-photon initiated polymerization, Progress in Polymer Science, 33, 631, 10.1016/j.progpolymsci.2008.01.001
Wu, 1992, Two-photon lithography for microelectronic application, Optical/Laser Microlithography V, International Society for Optics and Photonics, 776
Maruo, 1997, Three-dimensional microfabrication with two-photon-absorbed photopolymerization, Optics letters, 22, 132, 10.1364/OL.22.000132
Borisov, 1998, Fabrication of three-dimensional periodic microstructures by means of two-photon polymerization, Applied Physics B: Lasers and Optics, 67, 765, 10.1007/s003400050579
Sun, 1999, Three-dimensional photonic crystal structures achieved with two-photon-absorption photopolymerization of resin, Applied physics letters, 74, 786, 10.1063/1.123367
Cumpston, 1999, Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication, Nature, 398, 51, 10.1038/17989
Yang, 2004, Recent progress of lithographic microfabrication by the TPA-induced photopolymerization, Journal of Photopolymer Science and Technology, 17, 385, 10.2494/photopolymer.17.385
Coenjarts, 2004, Two-photon three-dimensional microfabrication of poly (dimethylsiloxane) elastomers, Chemistry of materials, 16, 5556, 10.1021/cm048717z
Takada, 2005, Improved spatial resolution and surface roughness in photopolymerization-based laser nanowriting, Applied Physics Letters, 86, 10.1063/1.1864249
Schizas, 2010, On the design and fabrication by two-photon polymerization of a readily assembled micro-valve, The International Journal of Advanced Manufacturing Technology, 48, 435, 10.1007/s00170-009-2320-4
Seet, 2005, Three‐Dimensional Spiral‐Architecture Photonic Crystals Obtained By Direct Laser Writing, Adv Mater, 17, 541, 10.1002/adma.200401527
Pham, 2006, Three‐Dimensional SiCN Ceramic Microstructures via Nano‐Stereolithography of Inorganic Polymer Photoresists, Adv Funct Mater, 16, 1235, 10.1002/adfm.200600009
Park, 2009, Fabrication of three-dimensional SiC ceramic microstructures with near-zero shrinkage via dual crosslinking induced stereolithography, Chem Commun, 32, 4880, 10.1039/b907923h
Colombo, 2017, Additive manufacturing techniques for fabricating complex ceramic components from preceramic polymers, Am. Ceram. Soc. Bull, 96, 16
Koroleva, 2015, Osteogenic Differentiation of Human Mesenchymal Stem Cells in 3-D Zr-Si Organic-Inorganic Scaffolds Produced by Two-Photon Polymerization Technique, Plos One, 10, 10.1371/journal.pone.0118164
Jang, 2013, Fabrication and deformation of three-dimensional hollow ceramic nanostructures, Nature materials, 12, 893, 10.1038/nmat3738
Tétreault, 2006, New route to three‐dimensional photonic bandgap materials: silicon double inversion of polymer templates, Adv Mater, 18, 457, 10.1002/adma.200501674
Meza, 2014, Mechanical characterization of hollow ceramic nanolattices, Journal of materials science, 49, 2496, 10.1007/s10853-013-7945-x
Meza, 2014, Strong, lightweight, and recoverable three-dimensional ceramic nanolattices, Science, 345, 1322, 10.1126/science.1255908
Le, 1998, Progress and trends in ink-jet printing technology, Journal of Imaging Science and Technology, 42, 49, 10.2352/J.ImagingSci.Technol.1998.42.1.art00007
Singh, 2010, Inkjet printing—process and its applications, Adv Mater, 22, 673, 10.1002/adma.200901141
Dong, 2006, An experimental study of drop-on-demand drop formation, Phys Fluids, 18, 10.1063/1.2217929
Kawase, 2003, Inkjet printing of polymer thin film transistors, Thin Solid Films, 438, 279, 10.1016/S0040-6090(03)00801-0
Kosmala, 2012, Development of high concentrated aqueous silver nanofluid and inkjet printing on ceramic substrates, Mater Chem Phys, 132, 788, 10.1016/j.matchemphys.2011.12.013
Kawahara, 2013, Instant inkjet circuits: lab-based inkjet printing to support rapid prototyping of UbiComp devices, Proceedings of the 2013 ACM international joint conference on Pervasive and ubiquitous computing, 363, 10.1145/2493432.2493486
Nakamura, 2005, Biocompatible inkjet printing technique for designed seeding of individual living cells, Tissue engineering, 11, 1658, 10.1089/ten.2005.11.1658
Blazdell, 1995, The computer aided manufacture of ceramics using multilayer jet printing, Journal of materials science letters, 14, 1562, 10.1007/BF00455415
Xiang, 1997, Solid freeforming of ceramics using a drop-on-demand jet printer, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 211, 211, 10.1243/0954405971516194
Zhao, 2003, Formulation of a ceramic ink for a wide-array drop-on-demand ink-jet printer, Ceramics International, 29, 887, 10.1016/S0272-8842(03)00032-4
Seerden, 2001, Ink‐jet printing of wax‐based alumina suspensions, Journal of the American Ceramic Society, 84, 2514, 10.1111/j.1151-2916.2001.tb01045.x
Peymannia, 2015, The effect of different dispersants on the physical properties of nano CoAl 2 O 4 ceramic ink-jet ink, Ceramics International, 41, 9115, 10.1016/j.ceramint.2015.03.311
Seerden, 1998, Direct ink-jet deposition of ceramic green bodies: I-Formulation of build materials, MRS Online Proceedings Library Archive, 542
Reis, 1998, Direct inkjet deposition of ceramic green bodies: II–jet behaviour and deposit formation, MRS Online Proceedings Library Archive, 542
Chen, 2018, Development and characterizations of novel aqueous-based LSCF suspensions for inkjet printing, Ceramics International, 44, 13381, 10.1016/j.ceramint.2018.04.174
Verwey, 1955, Theory of the stability of lyophobic colloids, Journal of Colloid Science, 10, 224, 10.1016/0095-8522(55)90030-1
Fromm, 1984, Numerical calculation of the fluid dynamics of drop-on-demand jets, IBM Journal of Research and Development, 28, 322, 10.1147/rd.283.0322
Bergeron, 2000, Controlling droplet deposition with polymer additives, Nature, 405, 772, 10.1038/35015525
Reis, 2000, Ink jet deposition of ceramic suspensions: Modeling and experiments of droplet formation, MRS Online Proceedings Library Archive, 625
Derby, 2003, Inkjet printing of highly loaded particulate suspensions, Mrs Bulletin, 28, 815, 10.1557/mrs2003.230
Noguera, 2005, 3D fine scale ceramic components formed by ink-jet prototyping process, Journal of the European Ceramic Society, 25, 2055, 10.1016/j.jeurceramsoc.2005.03.223
Noguera, 2005, EDP sciencesFabrication of 3D fine scale PZT components by ink-jet prototyping process, Journal de Physique IV (Proceedings)2005, Fabrication of 3D fine scale PZT components by ink-jet prototyping process, Journal de Physique IV (Proceedings), 87
Derby, 2011, Inkjet printing ceramics: From drops to solid, Journal of the European Ceramic Society, 31, 2543, 10.1016/j.jeurceramsoc.2011.01.016
Kuscer, 2012, Formulation of an aqueous titania suspension and its patterning with ink‐jet printing technology, Journal of the American Ceramic Society, 95, 487, 10.1111/j.1551-2916.2011.04876.x
Deegan, 1997, Capillary flow as the cause of ring stains from dried liquid drops, Nature, 389, 827, 10.1038/39827
Majumder, 2012, Overcoming the “coffee-stain” effect by compositional Marangoni-flow-assisted drop-drying, The Journal of Physical Chemistry B, 116, 6536, 10.1021/jp3009628
Dou, 2011, Ink‐Jet Printing of Zirconia: Coffee Staining and Line Stability, Journal of the American Ceramic Society, 94, 3787, 10.1111/j.1551-2916.2011.04697.x
Friederich, 2013, Rheological control of the coffee stain effect for inkjet printing of ceramics, Journal of the American Ceramic Society, 96, 2093, 10.1111/jace.12385
Özkol, 2010, Mechanical characterisation of miniaturised direct inkjet printed 3Y-TZP specimens for microelectronic applications, Journal of the European Ceramic Society, 30, 3145, 10.1016/j.jeurceramsoc.2010.07.016
Bhatti, 2001, PZT pillars for 1-3 composites prepared by ink-jet printing, Journal of materials science letters, 20, 1245, 10.1023/A:1010987209703
Lejeune, 2009, Ink-jet printing of ceramic micro-pillar arrays, Journal of the European Ceramic Society, 29, 905, 10.1016/j.jeurceramsoc.2008.07.040
Cappi, 2008, Direct inkjet printing of Si3N4: Characterization of ink, green bodies and microstructure, Journal of the European Ceramic Society, 28, 2625, 10.1016/j.jeurceramsoc.2008.03.004
Mott, 2001, Solid freeforming of silicon carbide by inkjet printing using a polymeric precursor, Journal of the American Ceramic Society, 84, 307, 10.1111/j.1151-2916.2001.tb00655.x
Sukeshini, 2009, Ink‐Jet Printing: A Versatile Method for Multilayer Solid Oxide Fuel Cells Fabrication, Journal of the American Ceramic Society, 92, 2913, 10.1111/j.1551-2916.2009.03349.x
Yashiro, 2010, Application of a thin intermediate cathode layer prepared by inkjet printing for SOFCs, Journal of the European Ceramic Society, 30, 2093, 10.1016/j.jeurceramsoc.2010.04.012
Ayabe, 2012, Application of dispenser printing for the preparation of a SOFC cathode with controlled microstructure, Journal of the European Ceramic Society, 32, 4279, 10.1016/j.jeurceramsoc.2012.07.009
Han, 2016, Fabrication of lanthanum strontium cobalt ferrite (LSCF) cathodes for high performance solid oxide fuel cells using a low price commercial inkjet printer, Journal of Power Sources, 306, 503, 10.1016/j.jpowsour.2015.12.067
Li, 2015, Green fabrication of composite cathode with attractive performance for solid oxide fuel cells through facile inkjet printing, Journal of Power Sources, 273, 465, 10.1016/j.jpowsour.2014.09.143
Sukeshini, 2009, Inkjet printing of anode supported SOFC: Comparison of slurry pasted cathode and printed cathode, Electrochemical and Solid-State Letters, 12, B176, 10.1149/1.3243468
Cesarano, 1998, Robocasting provides moldless fabrication from slurry deposition, Ceramic Industry, 148, 94
Cesarano, 2000
Lewis, 2006, Direct ink writing of three‐dimensional ceramic structures, Journal of the American Ceramic Society, 89, 3599, 10.1111/j.1551-2916.2006.01382.x
Li, 2007, Bone ingrowth in porous titanium implants produced by 3D fiber deposition, Biomaterials, 28, 2810, 10.1016/j.biomaterials.2007.02.020
Feilden, 2016, Robocasting of structural ceramic parts with hydrogel inks, Journal of the European Ceramic Society, 36, 2525, 10.1016/j.jeurceramsoc.2016.03.001
Elsayed, 2017, Direct ink writing of wollastonite-diopside glass-ceramic scaffolds from a silicone resin and engineered fillers, Journal of the European Ceramic Society, 37, 4187, 10.1016/j.jeurceramsoc.2017.05.021
Tuttle, 2001, (Zr0. 95Ti0. 05) O3 ceramic monoliths and composites, Journal of the American Ceramic Society, 84, 872, 10.1111/j.1151-2916.2001.tb00756.x
San Marchi, 2003, Alumina–aluminum interpenetrating-phase composites with three-dimensional periodic architecture, Scripta Materialia, 49, 861, 10.1016/S1359-6462(03)00441-X
Young, 2009, Load partitioning in Al2O3–Al composites with three-dimensional periodic architecture, Acta Materialia, 57, 2362, 10.1016/j.actamat.2009.01.019
Gratson, 2006, Direct‐write assembly of three‐dimensional photonic crystals: conversion of polymer scaffolds to silicon hollow‐woodpile structures, Adv Mater, 18, 461, 10.1002/adma.200501447
Lee, 2007, Rapid prototyping of ceramic millimeterwave metamaterials: Simulations and experiments, Microwave and Optical Technology Letters, 49, 2090, 10.1002/mop.22697
Larson, 2016, Direct ink writing of silicon carbide for microwave optics, Advanced Engineering Materials, 18, 39, 10.1002/adem.201500298
Sun, 2013, 3D printing of interdigitated Li‐Ion microbattery architectures, Adv Mater, 25, 4539, 10.1002/adma.201301036
Liu, 2017, Fabrication and Characterization of 3D-Printed Highly-Porous 3D LiFePO4 Electrodes by Low Temperature Direct Writing Process, Materials, 10, 934, 10.3390/ma10080934
Stuecker, 2004, Advanced support structures for enhanced catalytic activity, Industrial & engineering chemistry research, 43, 51, 10.1021/ie030291v
Kuhn, 2007, Direct-write microfabrication of single-chamber micro solid oxide fuel cells, Journal of micromechanics and microengineering, 18, 10.1088/0960-1317/18/1/015005
Michna, 2005, Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds, Biomaterials, 26, 5632, 10.1016/j.biomaterials.2005.02.040
Simon, 2007, In vivo bone response to 3D periodic hydroxyapatite scaffolds assembled by direct ink writing, Journal of Biomedical Materials Research Part A: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials, 83, 747, 10.1002/jbm.a.31329
Zocca, 2016, Direct ink writing of a preceramic polymer and fillers to produce hardystonite (Ca2ZnSi2O7) bioceramic scaffolds, Journal of the American Ceramic Society, 99, 1960, 10.1111/jace.14213
Smay, 2002, Directed colloidal assembly of 3D periodic structures, Adv Mater, 14, 1279, 10.1002/1521-4095(20020916)14:18<1279::AID-ADMA1279>3.0.CO;2-A
Smay, 2002, Colloidal inks for directed assembly of 3-D periodic structures, Langmuir, 18, 5429, 10.1021/la0257135
Lewis, 2002, Direct-write assembly of ceramics from colloidal inks, Current Opinion in Solid State and Materials Science, 6, 245, 10.1016/S1359-0286(02)00031-1
Miranda, 2006, Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications, Acta biomaterialia, 2, 457, 10.1016/j.actbio.2006.02.004
Martínez-Vázquez, 2010, Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration, Acta Biomaterialia, 6, 4361, 10.1016/j.actbio.2010.05.024
Eqtesadi, 2013, A simple recipe for direct writing complex 45S5 Bioglass® 3D scaffolds, Materials Letters, 93, 68, 10.1016/j.matlet.2012.11.043
Dellinger, 2005
Dellinger, 2006, Bone response to 3D periodic hydroxyapatite scaffolds with and without tailored microporosity to deliver bone morphogenetic protein 2, Journal of Biomedical Materials Research Part A: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials, 76, 366, 10.1002/jbm.a.30523
Miranda, 2008, Mechanical properties of calcium phosphate scaffolds fabricated by robocasting, Journal of Biomedical Materials Research Part A, 85, 218, 10.1002/jbm.a.31587
Cesarano, 2005, Customization of load‐bearing hydroxyapatite lattice scaffolds, International Journal of Applied Ceramic Technology, 2, 212, 10.1111/j.1744-7402.2005.02026.x
Rao, 2005, Microfabricated deposition nozzles for direct‐write assembly of three‐dimensional periodic structures, Adv Mater, 17, 289, 10.1002/adma.200400514
Schlordt, 2013, Robocasting of alumina hollow filament lattice structures, Journal of the European Ceramic Society, 33, 3243, 10.1016/j.jeurceramsoc.2013.06.001
Eqtesadi, 2018, Fabricating geometrically-complex B4C ceramic components by robocasting and pressureless spark plasma sintering, Scripta Materialia, 145, 14, 10.1016/j.scriptamat.2017.10.001
Huang, 2006, Freeze-form extrusion fabrication of ceramic parts, Virtual and Physical Prototyping, 1, 93, 10.1080/17452750600649609
Leu, 2012, Freeze-form extrusion fabrication of functionally graded materials, CIRP Annals-Manufacturing Technology, 61, 223, 10.1016/j.cirp.2012.03.050
Franchin, 2017, Direct ink writing of ceramic matrix composite structures, Journal of the American Ceramic Society, 100, 4397, 10.1111/jace.15045
Pierin, 2016, Direct Ink Writing of micrometric SiOC ceramic structures using a preceramic polymer, Journal of the European Ceramic Society, 36, 1589, 10.1016/j.jeurceramsoc.2016.01.047
Sachs, 1993, Three-dimensional printing techniques, Google Patents
Butscher, 2013, Moisture based three-dimensional printing of calcium phosphate structures for scaffold engineering, Acta biomaterialia, 9, 5369, 10.1016/j.actbio.2012.10.009
Grau, 1997, High green density ceramic components fabricated by the slurry-based 3DP process, 371
Sachs, 1992, Three dimensional printing: rapid tooling and prototypes directly from a CAD model, Journal of Engineering for Industry, 114, 481, 10.1115/1.2900701
Sachs, 2000, Production of injection molding tooling with conformal cooling channels using the three dimensional printing process, Polymer Engineering & Science, 40, 1232, 10.1002/pen.11251
Wu, 1996, Solid free-form fabrication of drug delivery devices, Journal of Controlled Release, 40, 77, 10.1016/0168-3659(95)00173-5
Singh, 2010, Three dimensional printing for casting applications: A state of art review and future perspectives, Advanced Materials Research, Trans Tech Publ, 342
Kruth, 1998, Progress in additive manufacturing and rapid prototyping, Cirp Annals, 47, 525, 10.1016/S0007-8506(07)63240-5
Deckers, 2014, Additive manufacturing of ceramics: a review, Journal of Ceramic Science and Technology, 5, 245
Sachs, 1992, CAD-casting: the direct fabrication of ceramic shells and cores by three-dimensional printing, Manuf Rev, 5, 118
Cesaretti, 2014, Building components for an outpost on the Lunar soil by means of a novel 3D printing technology, Acta Astronautica, 93, 430, 10.1016/j.actaastro.2013.07.034
Butscher, 2011, Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing, Acta biomaterialia, 7, 907, 10.1016/j.actbio.2010.09.039
Will, 2008, Porous ceramic bone scaffolds for vascularized bone tissue regeneration, Journal of Materials Science: materials in medicine, 19, 2781
Butscher, 2013, New depowdering-friendly designs for three-dimensional printing of calcium phosphate bone substitutes, Acta biomaterialia, 9, 9149, 10.1016/j.actbio.2013.07.019
Ke, 2018, Effects of pore distribution and chemistry on physical, mechanical, and biological properties of tricalcium phosphate scaffolds by binder-jet 3D printing, Additive Manufacturing, 22, 111, 10.1016/j.addma.2018.04.020
Zocca, 2015, 3D-printed silicate porous bioceramics using a non-sacrificial preceramic polymer binder, Biofabrication, 7, 10.1088/1758-5090/7/2/025008
Moon, 2002, Ink‐jet printing of binders for ceramic components, Journal of the American Ceramic Society, 85, 755, 10.1111/j.1151-2916.2002.tb00168.x
Lauder, 1991, Three dimensional printing: surface finish and microstructure of rapid prototyped components, MRS Online Proceedings Library Archive, 249
Lanzetta, 2003, Improved surface finish in 3D printing using bimodal powder distribution, Rapid Prototyping Journal, 9, 157, 10.1108/13552540310477463
Travitzky, 2014, Additive Manufacturing of Ceramic‐Based Materials, Advanced Engineering Materials, 16, 729, 10.1002/adem.201400097
Zhang, 2009, Three‐dimensional printing of complex‐shaped alumina/glass composites, Advanced Engineering Materials, 11, 1039, 10.1002/adem.200900213
Utela, 2008, A review of process development steps for new material systems in three dimensional printing (3DP), Journal of Manufacturing Processes, 10, 96, 10.1016/j.jmapro.2009.03.002
Karapatis, 1998, Direct rapid tooling: a review of current research, Rapid prototyping journal, 4, 77, 10.1108/13552549810210248
Zocca, 2015, Additive manufacturing of ceramics: issues, potentialities, and opportunities, Journal of the American Ceramic Society, 98, 1983, 10.1111/jace.13700
Fielding, 2012, Effects of silica and zinc oxide doping on mechanical and biological properties of 3D printed tricalcium phosphate tissue engineering scaffolds, Dental Materials, 28, 113, 10.1016/j.dental.2011.09.010
Nan, 2011, Three‐Dimensional Printing of Ti3SiC2‐Based Ceramics, Journal of the American Ceramic Society, 94, 969, 10.1111/j.1551-2916.2010.04257.x
Sun, 2002, Freeform fabrication of Ti3SiC2 powder-based structures: Part I—Integrated fabrication process, J Mater Process Tech, 127, 343, 10.1016/S0924-0136(02)00284-4
Deckard, 1989, Method and apparatus for producing parts by selective sintering, Google Patents
Gibson, 1997, Material properties and fabrication parameters in selective laser sintering process, Rapid prototyping journal, 3, 129, 10.1108/13552549710191836
Ho, 1999, Effects of energy density on morphology and properties of selective laser sintered polycarbonate, J Mater Process Tech, 89, 204, 10.1016/S0924-0136(99)00007-2
Kruth, 2003, Lasers and materials in selective laser sintering, Assembly Automation, 23, 357, 10.1108/01445150310698652
Schmidt, 2007, Selective laser sintering of PEEK, CIRP Annals-Manufacturing Technology, 56, 205, 10.1016/j.cirp.2007.05.097
Badrinarayan, 1992
Simchi, 2003, Effects of laser sintering processing parameters on the microstructure and densification of iron powder, Materials Science and Engineering: A, 359, 119, 10.1016/S0921-5093(03)00341-1
Yan, 2009, Preparation and selective laser sintering of nylon-12 coated metal powders and post processing, J Mater Process Tech, 209, 5785, 10.1016/j.jmatprotec.2009.06.010
Lakshminarayan, 1990, Selective laser sintering of ceramic materials
Lakshminarayan, 1991
Clare, 2008, Selective laser sintering of barium titanate–polymer composite films, Journal of materials science, 43, 3197, 10.1007/s10853-007-2396-x
Tan, 2003, Scaffold development using selective laser sintering of polyetheretherketone–hydroxyapatite biocomposite blends, Biomaterials, 24, 3115, 10.1016/S0142-9612(03)00131-5
Gao, 2013, Enhanced sintering ability of biphasic calcium phosphate by polymers used for bone scaffold fabrication, Materials Science and Engineering: C, 33, 3802, 10.1016/j.msec.2013.05.017
Lee, 1999, Densification of porous Al2O3-Al4B2O9 ceramic composites fabricated by SLS process, Journal of materials science letters, 18, 1557, 10.1023/A:1006695829140
Harlan, 1999, Selective laser sintering of zirconia with micro-scale features, Proc. SFF Symp., Austin, 297
Tang, 2002, Direct laser fusing to form ceramic parts, Rapid Prototyping Journal, 8, 284, 10.1108/13552540210451750
Xiao, 2008, Indirect selective laser sintering of apatite—wollostonite glass—ceramic, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 222, 1107, 10.1243/09544119JEIM411
Liu, 2010, The effect of processing parameters on characteristics of selective laser sintering dental glass-ceramic powder, Rapid Prototyping Journal, 16, 138, 10.1108/13552541011025861
Shahzad, 2012, Preparation and indirect selective laser sintering of alumina/PA microspheres, Ceramics International, 38, 1241, 10.1016/j.ceramint.2011.08.055
Deckers, 2012, Isostatic pressing assisted indirect selective laser sintering of alumina components, Rapid Prototyping Journal, 18, 409, 10.1108/13552541211250409
Shahzad, 2013, Additive manufacturing of alumina parts by indirect selective laser sintering and post processing, J Mater Process Tech, 213, 1484, 10.1016/j.jmatprotec.2013.03.014
Wohlert, 1996, Rapid prototyping of Mg/SiC composites by a combined SLS and pressureless infiltration process, Proc. Solid Freeform Fabrication Symposium, 79
Deckers, 2012, Density improvement of alumina parts produced through selective laser sintering of alumina-polyamide composite powder, CIRP Annals-Manufacturing Technology, 61, 211, 10.1016/j.cirp.2012.03.032
Deckers, 2016, Shaping ceramics through indirect selective laser sintering, Rapid Prototyping Journal, 22, 544, 10.1108/RPJ-10-2014-0143
Shahzad, 2014, Additive manufacturing of zirconia parts by indirect selective laser sintering, Journal of the European Ceramic Society, 34, 81, 10.1016/j.jeurceramsoc.2013.07.023
Friedel, 2005, Fabrication of polymer derived ceramic parts by selective laser curing, Journal of the European Ceramic Society, 25, 193, 10.1016/j.jeurceramsoc.2004.07.017
XiaoHui, 2015, Selective laser sintering of aliphatic-polycarbonate/hydroxyapatite composite scaffolds for medical applications, The International Journal of Advanced Manufacturing Technology, 81, 15, 10.1007/s00170-015-7135-x
Chung, 2008, Functionally graded Nylon-11/silica nanocomposites produced by selective laser sintering, Materials Science and Engineering: A, 487, 251, 10.1016/j.msea.2007.10.082
Lorrison, 2005, Processing of an apatite-mullite glass-ceramic and an hydroxyapatite/phosphate glass composite by selective laser sintering, Journal of Materials Science: Materials in Medicine, 16, 775
Goodridge, 2006, Indirect selective laser sintering of an apatite-mullite glass-ceramic for potential use in bone replacement applications, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 220, 57
Goodridge, 2007, Biological evaluation of an apatite–mullite glass-ceramic produced via selective laser sintering, Acta biomaterialia, 3, 221, 10.1016/j.actbio.2006.10.005
Duan, 2010, Three-dimensional nanocomposite scaffolds fabricated via selective laser sintering for bone tissue engineering, Acta biomaterialia, 6, 4495, 10.1016/j.actbio.2010.06.024
Yves-Christian, 2010, Net shaped high performance oxide ceramic parts by selective laser melting, Physics Procedia, 5, 587, 10.1016/j.phpro.2010.08.086
Bache, 1970, Model for strength of brittle materials built up of particles joined at points of contact, Journal of the American Ceramic Society, 53, 654, 10.1111/j.1151-2916.1970.tb12035.x
Vail, 1996, A thermal model of polymer degradation during selective laser sintering of polymer coated ceramic powders, Rapid Prototyping Journal, 2, 24, 10.1108/13552549610129764
Tang, 2011, Slurry-based selective laser sintering of polymer-coated ceramic powders to fabricate high strength alumina parts, Journal of the European Ceramic Society, 31, 1383, 10.1016/j.jeurceramsoc.2011.02.020
Schleifenbaum, 2010, Individualized production by means of high power Selective Laser Melting, CIRP Journal of Manufacturing Science and Technology, 2, 161, 10.1016/j.cirpj.2010.03.005
Meiners, 2001, Selective laser sintering at melting temperature, Google Patents
Simchi, 2006, Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features, Materials Science and Engineering: A, 428, 148, 10.1016/j.msea.2006.04.117
Hao, 2009, Selective laser melting of a stainless steel and hydroxyapatite composite for load-bearing implant development, J Mater Process Tech, 209, 5793, 10.1016/j.jmatprotec.2009.06.012
Mercelis, 2006, Residual stresses in selective laser sintering and selective laser melting, Rapid prototyping journal, 12, 254, 10.1108/13552540610707013
Shishkovsky, 2007, Alumina–zirconium ceramics synthesis by selective laser sintering/melting, Applied Surface Science, 254, 966, 10.1016/j.apsusc.2007.09.001
Deckers, 2014, Direct selective laser sintering/melting of high density alumina powder layers at elevated temperatures, Physics Procedia, 56, 117, 10.1016/j.phpro.2014.08.154
Bertrand, 2007, Ceramic components manufacturing by selective laser sintering, Applied Surface Science, 254, 989, 10.1016/j.apsusc.2007.08.085
Mühler, 2015, Slurry‐Based Additive Manufacturing of Ceramics, International Journal of Applied Ceramic Technology, 12, 18, 10.1111/ijac.12113
Gahler, 2006, Direct Laser Sintering of Al2O3–SiO2 Dental Ceramic Components by Layer‐Wise Slurry Deposition, Journal of the American Ceramic Society, 89, 3076, 10.1111/j.1551-2916.2006.01217.x
Li, 2017, Additive manufacturing of alumina using laser engineered net shaping: effects of deposition variables, Ceramics International, 43, 7768, 10.1016/j.ceramint.2017.03.085
Balla, 2008, Processing of bulk alumina ceramics using laser engineered net shaping, International Journal of Applied Ceramic Technology, 5, 234, 10.1111/j.1744-7402.2008.02202.x
Mühler, 2015, Slurry-based powder beds for the selective laser sintering of silicate ceramics, J. Ceram. Sci. Technol, 6, 113
Tian, 2009, Process parameters analysis of direct laser sintering and post treatment of porcelain components using Taguchi’s method, Journal of the European Ceramic Society, 29, 1903, 10.1016/j.jeurceramsoc.2008.12.002
Griffith, 1996, Free form fabrication of metallic components using laser engineered net shaping (LENS), Solid Freeform Fabrication Proceedings, Proc, 1996 Solid Freeform Fabrication Symposium, 125
Niu, 2015, Nanosized microstructure of Al2O3–ZrO2(Y2O3) eutectics fabricated by laser engineered net shaping, Scripta Materialia, 95, 39, 10.1016/j.scriptamat.2014.09.026
Wilkes, 2013, Additive manufacturing of ZrO2-Al2O3 ceramic components by selective laser melting, Rapid Prototyping Journal, 19, 51, 10.1108/13552541311292736
Aggarangsi, 2006, Localized preheating approaches for reducing residual stress in additive manufacturing, Proc. SFF Symp., Austin, 709
Wilkes, 2010, Rapid manufacturing of ceramic parts by selective laser melting, Ceramic Engineering and Science Proceedings, 137, 10.1002/9780470944066.ch13
Hagedorn, 2011, SLM of net-shaped high strength ceramics: new opportunities for producing dental restorations, Proceedings of the Solid Freeform Fabrication Symposium, Austin, 8
Exner, 2008, Laser micro sintering: A new method to generate metal and ceramic parts of high resolution with sub-micrometer powder, Virtual and physical prototyping, 3, 3, 10.1080/17452750801907970
Exner, 2003, Selective laser micro sintering with a novel process, 145
Kunieda, 1984, Manufacturing of laminated deep drawing dies by laser beam cutting, Advanced Technology of Plasticity, 1, 520
Dolenc, 1994
Griffin, 1994, Desktop manufacturing: LOM vs. pressing, Am. Ceram. Soc. Bull., 73, 109
Griffin, 1994, Solid freeform fabrication of functional ceramic components using a laminated object manufacturing technique, Solid Freeform Fabrication, 17
Klosterman, 1999, Development of a curved layer LOM process for monolithic ceramics and ceramic matrix composites, Rapid Prototyping Journal, 5, 61, 10.1108/13552549910267362
Weisensel, 2004, Laminated object manufacturing (LOM) of SiSiC composites, Advanced Engineering Materials, 6, 899, 10.1002/adem.200400112
Griffin, 1996, Rapid prototyping of functional ceramic composites, American Ceramic Society Bulletin, 75, 65
Zhang, 2001, Rapid prototyping and combustion synthesis of TiC/Ni functionally gradient materials, Materials Science and Engineering: A, 299, 218, 10.1016/S0921-5093(00)01377-0
Gomes, 2011, Laminated object manufacturing of LZSA glass-ceramics, Rapid Prototyping Journal, 17, 424, 10.1108/13552541111184152
Pan, 2004, Optimizing the performance of telescoping actuators through rapid prototyping and finite element modeling, Ceramic Transactions, 150, 53
Steidle, 1999, Automated fabrication of custom bone implants using rapid prototyping, 1866
Windsheimer, 2007, Laminated Object Manufacturing of Preceramic‐Paper‐Derived Si-SiC Composites, Adv Mater, 19, 4515, 10.1002/adma.200700789
Travitzky, 2008, Preceramic Paper‐Derived Ceramics, Journal of the American Ceramic Society, 91, 3477, 10.1111/j.1551-2916.2008.02752.x
Gomes, 2010, Preceramic paper derived fibrillar ceramics, Ceram. Trans, 210, 421, 10.1002/9780470640845.ch61
Rodrigues, 2000, Solid freeform fabrication of functional silicon nitride ceramics by laminated object manufacturing
Penas, 2001, Processing, microstructure, mechanical properties of Si3N4 obtained by slip casting and pressureless sintering, Ceramics international, 27, 591, 10.1016/S0272-8842(01)00006-2
Yu, 2009, Neural network modeling and analysis of gel casting preparation of porous Si3N4 ceramics, Ceramics International, 35, 2943, 10.1016/j.ceramint.2009.04.008
Krinitcyn, 2017, Laminated Object Manufacturing of in-situ synthesized MAX-phase composites, Ceramics International, 43, 9241, 10.1016/j.ceramint.2017.04.079
Kechagias, 2004, Process build-time estimator algorithm for laminated object manufacturing, Rapid Prototyping Journal, 10, 297, 10.1108/13552540410562331
Kechagias, 2007, Investigation of LOM process quality using design of experiments approach, Rapid Prototyping Journal, 13, 316, 10.1108/13552540710824823
Ahn, 2009, Surface roughness prediction using measured data and interpolation in layered manufacturing, J Mater Process Tech, 209, 664, 10.1016/j.jmatprotec.2008.02.050
Klosterman, 1998, Interfacial characteristics of composites fabricated by laminated object manufacturing, Composites Part A: Applied Science and Manufacturing, 29, 1165, 10.1016/S1359-835X(98)00088-8
Schindler, 2009, Manufacture of 3D structures by cold low pressure lamination of ceramic green tapes, Journal of the European Ceramic Society, 29, 899, 10.1016/j.jeurceramsoc.2008.07.041
Crump, 1992, Apparatus and method for creating three-dimensional objects, Google Patents
Chua, 2003
Rundle, 2014
Wittbrodt, 2015, The effects of PLA color on material properties of 3-D printed components, Additive Manufacturing, 8, 110, 10.1016/j.addma.2015.09.006
Taufik, 2016, A study of build edge profile for prediction of surface roughness in fused deposition modeling, Journal of Manufacturing Science and Engineering, 138, 10.1115/1.4032193
Khatri, 2018, Fused Deposition Modeling of ABS-Barium Titanate Composites: A Simple Route towards Tailored Dielectric Devices, Polymers, 10, 10.3390/polym10060666
Danforth, 1995, Fused deposition of ceramics: a new technique for the rapid fabrication of ceramic components, Mater Technol, 10, 144, 10.1080/10667857.1995.11752614
Allahverdi, 2001, Processing of advanced electroceramic components by fused deposition technique, Journal of the European Ceramic Society, 21, 1485, 10.1016/S0955-2219(01)00047-4
Yang, 2006, Fine ceramic lattices prepared by extrusion freeforming, Journal of Biomedical Materials Research Part B: Applied Biomaterials, 79, 116, 10.1002/jbm.b.30520
Gasdaska, 1998, Functionally optimized ceramic structures, Proceedings of Solid Freeform Fabrication Symposium, Austin, 705
Jafari, 2000, A novel system for fused deposition of advanced multiple ceramics, Rapid Prototyping Journal, 6, 161, 10.1108/13552540010337047
Iyer, 2008, Microstructural characterization and mechanical properties of Si3N4 formed by fused deposition of ceramics, International Journal of Applied Ceramic Technology, 5, 127, 10.1111/j.1744-7402.2008.02193.x
Hutmacher, 2001, Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling, Journal of Biomedical Materials Research: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials, 55, 203, 10.1002/1097-4636(200105)55:2<203::AID-JBM1007>3.0.CO;2-7
Cao, 2003, Scaffold design and in vitro study of osteochondral coculture in a three-dimensional porous polycaprolactone scaffold fabricated by fused deposition modeling, Tissue engineering, 9, 103, 10.1089/10763270360697012
Tsang, 2004, Three-dimensional tissue fabrication, Advanced drug delivery reviews, 56, 1635, 10.1016/j.addr.2004.05.001
Xu, 2014, 3D artificial bones for bone repair prepared by computed tomography-guided fused deposition modeling for bone repair, ACS applied materials & interfaces, 6, 14952, 10.1021/am502716t
Sa, 2018, Fabrication and evaluation of 3D printed BCP scaffolds reinforced with ZrO2 for bone tissue applications, Biotechnology and bioengineering, 115, 989, 10.1002/bit.26514
Pilleux, 2002, 3-D photonic bandgap structures in the microwave regime by fused deposition of multimaterials, Rapid Prototyping Journal, 8, 46, 10.1108/13552540210413301
Chen, 2001, Simulation, fabrication, and characterization of 3‐D alumina photonic bandgap structures, Microwave and Optical Technology Letters, 30, 305, 10.1002/mop.1297
Rangarajan, 1997, The role of materials processing variables in FDC process, Proceedings of the solid freeform fabrication symposium, 431
Rangarajan, 2000, Powder processing, rheology, and mechanical properties of feedstock for fused deposition of Si3N4 ceramics, Journal of the American Ceramic Society, 83, 1663, 10.1111/j.1151-2916.2000.tb01446.x
Kalita, 2003, Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling, Materials Science and Engineering: C, 23, 611, 10.1016/S0928-4931(03)00052-3
Mohamed, 2015, Optimization of fused deposition modeling process parameters: a review of current research and future prospects, Advances in Manufacturing, 3, 42, 10.1007/s40436-014-0097-7
Ahn, 2002, Anisotropic material properties of fused deposition modeling ABS, Rapid prototyping journal, 8, 248, 10.1108/13552540210441166
Anitha, 2001, Critical parameters influencing the quality of prototypes in fused deposition modelling, J Mater Process Tech, 118, 385, 10.1016/S0924-0136(01)00980-3
Agarwala, 1996, Structural quality of parts processed by fused deposition, Rapid Prototyping Journal, 2, 4, 10.1108/13552549610732034
Pandey, 2003, Improvement of surface finish by staircase machining in fused deposition modeling, J Mater Process Tech, 132, 323, 10.1016/S0924-0136(02)00953-6
Thrimurthulu, 2004, Optimum part deposition orientation in fused deposition modeling, International Journal of Machine Tools and Manufacture, 44, 585, 10.1016/j.ijmachtools.2003.12.004
Galantucci, 2009, Experimental study aiming to enhance the surface finish of fused deposition modeled parts, CIRP annals, 58, 189, 10.1016/j.cirp.2009.03.071