3D printing for development of medical equipment amidst coronavirus (COVID-19) pandemic—review and advancements
Tóm tắt
Coronavirus (COVID-19) has surfaced as a global pandemic and has created an unprecedented global demand for medical equipment. The shortage of onsite workforce, need for social distancing and less time available for sourcing have further made it difficult for the governments and the medical professionals to combat the pandemic. This study’s prime objective is to review the advancements in the area of 3D printing to develop medical equipment and explore the potential of 3D printing in addressing the shortage of medical equipment mainly the personal protective equipment (PPE) amidst COVID-19 pandemic. 3D printing or additive manufacturing has emerged as a new manufacturing process with tremendous potential to develop complex products in short time with minimal human interventions. The paper summarises 3D printing’s potential to serve the increasing need for medical equipment, mainly personal protective equipment (PPE) and ventilator equipment in the ongoing global COVID-19 pandemic. The minimum human interventions required to carry out production using 3D printing also make the technology an excellent option to deal with the current situation. The recommendations and opinions presented in the paper shall act as a stimulant to develop components very critical for the pandemic and help save precious lives globally.
Tài liệu tham khảo
Allen J, Burns N, Garrett L, Haass RN, Ikenberry GJ, Mahbubani K, et al. How the world will look after the coronavirus pandemic. Foreign Policy. 2020;20:2020.
Attaran M. The rise of 3-D printing: the advantages of additive manufacturing over traditional manufacturing. Bus Horiz. 2017;60:677–88.
Aziz R, Haq MIU, Raina A. Effect of surface texturing on friction behaviour of 3D printed polylactic acid (PLA). Polym Test. 2020;85:106434.
Balmer C, Pollina E. Italy’s Lombardy asks retired health workers to join coronavirus fight. World Econ. Forum, Reuters, 2020.
Berman B. 3-D printing: the new industrial revolution. Bus Horiz. 2012;55:155–62.
Cai H. Application of 3D printing in orthopedics: status quo and opportunities in China. Ann Transl Med. 2015;3.
Cavanagh D. Coronavirus avian infectious bronchitis virus. Vet Res. 2007;38:281–97.
Chadha A, Haq MIU, Raina A, Singh RR, Penumarti NB, Bishnoi MS. Effect of fused deposition modelling process parameters on mechanical properties of 3D printed parts. World J Eng. 2019;16:550–9.
Chatburn RL, Mireles-Cabodevilla E. Basics principles of ventilator design. Princ Pract Mech Vent 3rd Edn McGraw-Hill, New York. 2013:65–97.
Chughtai AA, Stelzer-Braid S, Rawlinson W, Pontivivo G, Wang Q, Pan Y, et al. Contamination by respiratory viruses on outer surface of medical masks used by hospital healthcare workers. BMC Infect Dis. 2019;19:1–8.
Conner BP, Manogharan GP, Martof AN, Rodomsky LM, Rodomsky CM, Jordan DC, et al. Making sense of 3-D printing: creating a map of additive manufacturing products and services. Addit Manuf. 2014;1:64–76.
Coronavirus Update (Live): 1, 365, 330 Cases and 76, 504 Deaths from COVID-19 virus outbreak – Worldometer. 2020. Available from: https://www.worldometers.info/coronavirus/?utm_campaign=homeAdvegas1?
Dawood A, Marti BM, Sauret-Jackson V, Darwood A. 3D printing in dentistry. Br Dent J. 2015;219:521–9.
Durfee WK, Iaizzo PA. Medical applications of 3D printing. Eng. Med., Elsevier; 2019, p. 527–43.
Dutta B, Froes FHS. The additive manufacturing (AM) of titanium alloys. Titan. powder Metall., Elsevier; 2015, p. 447–68.
Emanuel EJ, Persad G, Upshur R, Thome B, Parker M, Glickman A, Zhang C, Boyle C, Smith M, Phillips JP. Fair allocation of scarce medical resources in the time of Covid-19. 2020.
Fernandes N. Economic effects of coronavirus outbreak (COVID-19) on the world economy. Available SSRN 3557504. 2020.
Gebler M, Uiterkamp AJMS, Visser C. A global sustainability perspective on 3D printing technologies. Energy Policy. 2014;74:158–67.
Haleem A, Javaid M. 3D printed medical parts with different materials using additive manufacturing. Clin Epidemiol Glob Heal. 2020;8:215–23.
Ho CMB, Ng SH, Yoon Y-J. A review on 3D printed bioimplants. Int J Precis Eng Manuf. 2015;16:1035–46.
Hong J LD& B. World ventilator demand is now 10 times what’s available, says China’s top medical device maker. 2020.
Huang W, Morawska L. Face masks could raise pollution risks. 2019
Huang H-C, Araz OM, Morton DP, Johnson GP, Damien P, Clements B, et al. Stockpiling ventilators for influenza pandemics. Emerg Infect Dis. 2017;23:914–21.
Huang C, Wang Y, Li X, Ren L, Zhao J, Hu Y, et al. Clinical features of patients infected with 2019 novel coronavirus in Wuhan, China. Lancet. 2020;395:497–506.
Ismail MM, Tang Y, Saif YM. Pathogenicity of Turkey coronavirus in turkeys and chickens. Avian Dis. 2003;47:515–22.
Javaid M, Haleem A. Additive manufacturing applications in medical cases: a literature based review. Alexandria J Med. 2018;54:411–22.
Lee J-Y, An J, Chua CK. Fundamentals and applications of 3D printing for novel materials. Appl Mater Today. 2017;7:120–33.
Long Y, Hu T, Liu L, Chen R, Guo Q, Yang L, et al. Effectiveness of N95 respirators versus surgical masks against influenza: a systematic review and meta-analysis. J Evid Based Med. 2020;13:93–101.
Marro A, Bandukwala T, Mak W. Three-dimensional printing and medical imaging: a review of the methods and applications. Curr Probl Diagn Radiol. 2016;45:2–9.
McKibbin W, Fernando R. The economic impact of COVID-19. Econ Time COVID-19. 2020;45.
Mello CHP, Martins RC, Parra BR, de Oliveira PE, Salgado EG, Seguso RT. Systematic proposal to calculate price of prototypes manufactured through rapid prototyping an FDM 3D printer in a university lab. Rapid Prototyp J. 2010;16.
Mobbs RJ, Coughlan M, Thompson R, Sutterlin CE, Phan K. The utility of 3D printing for surgical planning and patient-specific implant design for complex spinal pathologies: case report. J Neurosurg Spine. 2017;26:513–8.
Negi S, Dhiman S, Sharma RK. Basics, applications and future of additive manufacturing technologies: a review. J Manuf Technol Res. 2013;5:75.
Ngo TD, Kashani A, Imbalzano G, Nguyen KTQ, Hui D. Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos Part B Eng. 2018;143:172–96.
Nicola M, Alsafi Z, Sohrabi C, Kerwan A, Al-Jabir A, Iosifidis C, et al. The socio-economic implications of the coronavirus pandemic (COVID-19): a review. Int J Surg. 2020;78:185.
Peiris JSM, Guan Y, Yuen KY. Severe acute respiratory syndrome. Nat Med. 2004;10:S88–97.
Petrick IJ, Simpson TW. 3D printing disrupts manufacturing: how economies of one create new rules of competition. Res Manag. 2013;56:12–6.
Preece D, Lewis R, Carré MJ. A critical review of the assessment of medical gloves. Tribol Surf Interfaces. 2020:1–10.
Ranney ML, Griffeth V, Jha AK. Critical supply shortages—the need for ventilators and personal protective equipment during the Covid-19 pandemic. N Engl J Med. 2020;382:e41.
Rayna T, Striukova L. From rapid prototyping to home fabrication: how 3D printing is changing business model innovation. Technol Forecast Soc Change. 2016;102:214–24.
Rengier F, Mehndiratta A, Von Tengg-Kobligk H, Zechmann CM, Unterhinninghofen R, Kauczor H-U, et al. 3D printing based on imaging data: review of medical applications. Int J Comput Assist Radiol Surg. 2010;5:335–41.
Rosenbaum L. Facing Covid-19 in Italy—ethics, logistics, and therapeutics on the epidemic’s front line. N Engl J Med. 2020;382:1873–5.
Rubinson L, Vaughn F, Nelson S, Giordano S, Kallstrom T, Buckley T, et al. Mechanical ventilators in US acute care hospitals. Disaster Med Public Health Prep. 2010;4:199–206.
Sanger-Katz M, Kliffs S, Parlopiano A. These places could run out of hospital beds as coronavirus spreads. New York: New York Times; 2020.
Singh R, Chhabra M. Three-dimensional printing. 2017
Su S, Wong G, Shi W, Liu J, Lai ACK, Zhou J, et al. Epidemiology, genetic recombination, and pathogenesis of coronaviruses. Trends Microbiol. 2016;24:490–502.
Tan ETW, Ling JM, Dinesh SK. The feasibility of producing patient-specific acrylic cranioplasty implants with a low-cost 3D printer. J Neurosurg. 2016;124:1531–7.
Tripp RA, Tompkins SM. Roles of host gene and non-coding RNA expression in virus infection. vol. 419. Springer; 2018.
Ventola CL. Medical applications for 3D printing: current and projected uses. Pharm Ther. 2014;39:704.
Wang Q, Yu C. The role of masks and respirator protection against SARS-CoV-2. Infect Control Hosp Epidemiol. 2020;41:746–7.
Wu N, Chen Q, Liao L, Wang X. Analysis of impact of 3D printing technology on traditional manufacturing technology. Mech. Eng. Control Syst. Proc. 2015 Int. Conf. Mech. Eng. Control Syst., 2016, p. 58–60.
X EN. Ventilators are key to preventing coronavirus deaths—but does the world have enough of them? 2020.
Zaki AM, Van Boheemen S, Bestebroer TM, Osterhaus ADME, Fouchier RAM. Isolation of a novel coronavirus from a man with pneumonia in Saudi Arabia. N Engl J Med. 2012;367:1814–20.
Zhu N, Zhang D, Wang W, Li X, Yang B, Song J, et al. N Engl J Med. 2019:2020.