3D printed PEEK/HA composites for bone tissue engineering applications: Effect of material formulation on mechanical performance and bioactive potential

Abu Bakar, 2003, Tensile properties, tension–tension fatigue and biological response of polyetheretherketone–hydroxyapatite composites for load-bearing orthopedic implants, Biomaterials, 24, 2245, 10.1016/S0142-9612(03)00028-0 Ai, 2011, Mechanical properties of chitosan-starch composite filled hydroxyapatite micro-and nanopowders, J. Nanomater., 5 Akao, 1981, Mechanical properties of sintered hydroxyapatite for prosthetic applications, J. Mater. Sci., 16, 809, 10.1007/BF02402799 Alam, 2020, Additively manufactured polyetheretherketone (PEEK) with carbon nanostructure reinforcement for biomedical structural applications, Adv. Eng. Mater., 22, 2000483, 10.1002/adem.202000483 Anderson, 2018, Blocky ionomers via sulfonation of poly (ether ether ketone) in the semicrystalline gel state, Macromolecules, 51, 6226, 10.1021/acs.macromol.8b01152 Bakar, 2003, Mechanical properties of injection molded hydroxyapatite-polyetheretherketone biocomposites, Compos. Sci. Technol., 63, 421, 10.1016/S0266-3538(02)00230-0 Bakar, 2003, Tensile properties, tension–tension fatigue and biological response of polyetheretherketone–hydroxyapatite composites for load-bearing orthopedic implants, Biomaterials, 24, 2245, 10.1016/S0142-9612(03)00028-0 Berretta, 2017, Fused Deposition Modelling of high temperature polymers: exploring CNT PEEK composites, Polym. Test., 63, 251, 10.1016/j.polymertesting.2017.08.024 Berretta, 2018, Additive manufacture of PEEK cranial implants: manufacturing considerations versus accuracy and mechanical performance, Mater. Des., 139, 141, 10.1016/j.matdes.2017.10.078 Chen, 2001, Evaluation on the mechanical properties of the solid solution of strontium substituted hydroxyapatite, Chin J Stoma Mater Appar, 19, 178 Conrad, 2020, Effects of porogen morphology on the architecture, permeability, and mechanical properties of hydroxyapatite whisker reinforced polyetheretherketone scaffolds, J. Mech. Behav. Biomed. Mater., 106, 103730, 10.1016/j.jmbbm.2020.103730 Converse, 2007, Processing and tensile properties of hydroxyapatite-whisker-reinforced polyetheretherketone, Biomaterials, 28, 927, 10.1016/j.biomaterials.2006.10.031 de Araújo Nobre, 2019, Adult patient risk stratification using a risk score for periodontitis, J. Clin. Med., 8, 307, 10.3390/jcm8030307 de Araújo Nobre, 2019, A peri-implant disease risk score for patients with dental implants: validation and the influence of the interval between maintenance appointments, J. Clin. Med., 8, 252, 10.3390/jcm8020252 Deng, 2015, Effect of surface roughness on osteogenesis in vitro and osseointegration in vivo of carbon fiber-reinforced polyetheretherketone–nanohydroxyapatite composite, Int. J. Nanomed., 10, 1425 Dey, 2019, Reversing and non-reversing effects of PEEK-HA composites on tuning cooling rate during crystallization, J. Polym. Res., 26, 279, 10.1007/s10965-019-1967-2 Díez-Pascual, 2010, High performance PEEK/carbon nanotube composites compatibilized with polysulfones-II. Mechanical and electrical properties, Carbon, 48, 3500, 10.1016/j.carbon.2010.05.050 Evis, 2011, Nanosize hydroxyapatite: doping with various ions, Adv. Appl. Ceramics, 110, 311, 10.1179/1743676110Y.0000000005 Garcia-Gonzalez, 2017, On the mechanical behaviour of PEEK and HA cranial implants under impact loading, J. Mech. Behav. Biomed. Mater., 69, 342, 10.1016/j.jmbbm.2017.01.012 Golbang, 2020, Production and characterization of PEEK/IF-WS2 nanocomposites for additive manufacturing: simultaneous improvement in processing characteristics and material properties, Additive Manufacturing, 31, 100920, 10.1016/j.addma.2019.100920 Graziani, 2018, A review on ionic substitutions in hydroxyapatite thin films: towards complete biomimetism, Coatings, 8, 269, 10.3390/coatings8080269 Han, 2019, Carbon fiber reinforced PEEK composites based on 3D-printing technology for orthopedic and dental applications, J. Clin. Med., 8, 240, 10.3390/jcm8020240 Hao, 2018, Enhancing the mechanical performance of poly (ether ether ketone)/zinc oxide nanocomposites to provide promising biomaterials for trauma and orthopedic implants, RSC Adv., 8, 27304, 10.1039/C8RA01736K Hao, 2006, Selective laser sintering of hydroxyapatite reinforced polyethylene composites for bioactive implants and tissue scaffold development, Proc. IME H J. Eng. Med., 220, 521, 10.1243/09544119JEIM67 Hench, 1993 Hughes, 2018, Formulation of a covalently bonded hydroxyapatite and poly (ether ether ketone) composite, J. Tissue Eng., 9, 10.1177/2041731418815570 Humbert, 2011, A re-examination of the elastic modulus dependence on crystallinity in semi-crystalline polymers, Polymer, 52, 4899, 10.1016/j.polymer.2011.07.060 ISO, 1996, 1 Jarman-Smith, 2008, Evolving uses for implantable PEEK and PEEK based compounds, Med. Device Technol., 19, 12 Jeyachandran, 2020, Mechanical behaviour of additively manufactured bioactive glass/high density polyethylene composites, J. Mech. Behav. Biomed. Mater., 108, 103830, 10.1016/j.jmbbm.2020.103830 Ji, 2002, Tensile modulus of polymer nanocomposites, Polym. Eng. Sci., 42, 983, 10.1002/pen.11007 Kokubo, 2006, How useful is SBF in predicting in vivo bone bioactivity?, Biomaterials, 27, 2907, 10.1016/j.biomaterials.2006.01.017 Kumar, 2018, Effects of sterilization cycles on PEEK for medical device application, Bioengineering, 5, 18, 10.3390/bioengineering5010018 Kurtz, 2007, PEEK biomaterials in trauma, orthopedic, and spinal implants, Biomaterials, 28, 4845, 10.1016/j.biomaterials.2007.07.013 Lee, 2013, In vitro and in vivo evaluation of the bioactivity of hydroxyapatite-coated polyetheretherketone biocomposites created by cold spray technology, Acta Biomater., 9, 6177, 10.1016/j.actbio.2012.11.030 Lee, 2012, Stress shielding and fatigue limits of poly‐ether‐ether‐ketone dental implants, J. Biomed. Mater. Res. B Appl. Biomater., 100, 1044, 10.1002/jbm.b.32669 Lowry, 2018, Synthesis and characterisation of nanophase hydroxyapatite co-substituted with strontium and zinc, Ceram. Int., 44, 7761, 10.1016/j.ceramint.2018.01.206 Ma, 2019, Evaluating the bioactivity of a hydroxyapatite-incorporated polyetheretherketone biocomposite, J. Orthop. Surg. Res., 14, 1, 10.1186/s13018-019-1069-1 Ma, 2019, Evaluating the bioactivity of a hydroxyapatite-incorporated polyetheretherketone biocomposite, J. Orthop. Surg. Res., 14, 32, 10.1186/s13018-019-1069-1 Ma, 2014, Current strategies to improve the bioactivity of PEEK, Int. J. Mol. Sci., 15, 5426, 10.3390/ijms15045426 Ma, 2012, Characterization of in situ synthesized hydroxyapatite/polyetheretherketone composite materials, Mater. Lett., 71, 117, 10.1016/j.matlet.2011.12.007 Meyers, 2008, Biological materials: structure and mechanical properties, Prog. Mater. Sci., 53, 1, 10.1016/j.pmatsci.2007.05.002 Muralithran, 2000, The effects of sintering temperature on the properties of hydroxyapatite, Ceram. Int., 26, 221, 10.1016/S0272-8842(99)00046-2 Najeeb, 2016, Applications of polyetheretherketone (PEEK) in oral implantology and prosthodontics, Journal of prosthodontic research, 60, 12, 10.1016/j.jpor.2015.10.001 Ni, 2011, The effect of strontium incorporation in hydroxyapatite on osteoblasts in vitro, J. Mater. Sci. Mater. Med., 22, 961, 10.1007/s10856-011-4264-0 Oladapo, 2020, 3D printing of PEEK–cHAp scaffold for medical bone implant, Bio-Design and Manufacturing, 1 Peng, 2017, Graphene oxide as an interface phase between polyetheretherketone and hydroxyapatite for tissue engineering scaffolds, Sci. Rep., 7, 46604, 10.1038/srep46604 Petersmann, 2020, Mechanical properties of polymeric implant materials produced by extrusion-based additive manufacturing, J. Mech. Behav. Biomed. Mater., 104, 103611, 10.1016/j.jmbbm.2019.103611 Pierantozzi, 2020, 3D printed Sr-containing composite scaffolds: effect of structural design and material formulation towards new strategies for bone tissue engineering, Compos. Sci. Technol., 191, 108069, 10.1016/j.compscitech.2020.108069 Rego, 2015, Mechanical properties and stem cell adhesion of injection‐molded poly (ether ether ketone) and hydroxyapatite nanocomposites, J. Appl. Polym. Sci., 132, 10.1002/app.41748 Rinaldi, 2018, Additive layer manufacturing of poly (ether ether ketone) via FDM, Compos. B Eng., 145, 162, 10.1016/j.compositesb.2018.03.029 Roeder, 2008, Hydroxyapatite-reinforced polymer biocomposites for synthetic bone substitutes, JOM (J. Occup. Med.), 60, 38 Roy, 2015, Mechanical, thermal and bio-compatibility studies of PAEK-hydroxyapatite nanocomposites, J. Mech. Behav. Biomed. Mater., 49, 1, 10.1016/j.jmbbm.2015.04.022 Saeed, 2021, Predication of the in-plane mechanical properties of continuous carbon fibre reinforced 3D printed polymer composites using classical laminated-plate theory, Compos. Struct., 259, 113226, 10.1016/j.compstruct.2020.113226 Sandler, 2002, Carbon-nanofibre-reinforced poly (ether ether ketone) composites, Compos. Appl. Sci. Manuf., 33, 1033, 10.1016/S1359-835X(02)00084-2 Scalera, 2020, Sintering of magnesium‐strontium doped hydroxyapatite nanocrystals: towards the production of 3D biomimetic bone scaffolds, J. Biomed. Mater. Res., 108, 633, 10.1002/jbm.a.36843 Schmidt, 2007, Selective laser sintering of PEEK, CIRP Annals, 56, 205, 10.1016/j.cirp.2007.05.097 Sikder, 2020, Bioactive amorphous magnesium phosphate-polyetheretherketone composite filaments for 3D printing, Dent. Mater., 10.1016/j.dental.2020.04.008 Sikder, 2020, Bioactive amorphous magnesium phosphate-polyetheretherketone composite filaments for 3D printing, Dent. Mater., 36, 865, 10.1016/j.dental.2020.04.008 Silva, 2005, The use of hydroxyapatite and autogenous cancellous bone grafts to repair bone defects in rats, Int. J. Oral Maxillofac. Surg., 34, 178, 10.1016/j.ijom.2004.06.005 Stanislavov, 2018, Structural features of hydroxyapatite and carbonated apatite formed under the influence of ultrasound and microwave radiation and their effect on the bioactivity of the nanomaterials, Ultrason. Sonochem., 42, 84, 10.1016/j.ultsonch.2017.11.011 Stansbury, 2016, 3D printing with polymers: challenges among expanding options and opportunities, Dent. Mater., 32, 54, 10.1016/j.dental.2015.09.018 Stepashkin, 2018, 3D-printed PEEK-carbon fiber (CF) composites: structure and thermal properties, Compos. Sci. Technol., 164, 319, 10.1016/j.compscitech.2018.05.032 Tan, 2003, Scaffold development using selective laser sintering of polyetheretherketone–hydroxyapatite biocomposite blends, Biomaterials, 24, 3115, 10.1016/S0142-9612(03)00131-5 Tan, 2005, Fabrication and characterization of three-dimensional poly (ether-ether-ketone)/-hydroxyapatite biocomposite scaffolds using laser sintering, Proc. IME H J. Eng. Med., 219, 183, 10.1243/095441105X9345 Tan, 1999, Crystallization kinetics of poly (ether ether ketone)(PEEK) from its metastable melt, Polymer, 40, 1223, 10.1016/S0032-3861(98)00275-4 Tao, 2016, A comparative study of strontium-substituted hydroxyapatite coating on implant's osseointegration for osteopenic rats, Med. Biol. Eng. Comput., 54, 1959, 10.1007/s11517-016-1494-9 Temprom, 2016, Bioactivity, cytotoxicity and antibacterial evaluation of undoped, Zn-doped, Sr-doped, and Zn/Sr-codoped hydroxyapatites synthesized by a sol-gel method, Chiang Mai J. Sci., 43, 1 Thian, 2013, Zinc-substituted hydroxyapatite: a biomaterial with enhanced bioactivity and antibacterial properties, J. Mater. Sci. Mater. Med., 24, 437, 10.1007/s10856-012-4817-x Ventola, 2014, Medical applications for 3D printing: current and projected uses, Pharmacy and Therapeutics, 39, 704 Verma, 1996, SAXS studies of lamellar level morphological changes during crystallization and melting in PEEK, Polymer, 37, 5357, 10.1016/S0032-3861(96)00387-4 Wang, 2014, Polyetheretherketone/nano-fluorohydroxyapatite composite with antimicrobial activity and osseointegration properties, Biomaterials, 35, 6758, 10.1016/j.biomaterials.2014.04.085 Wang, 2010, Mechanical properties and microstructure of polyetheretherketone–hydroxyapatite nanocomposite materials, Mater. Lett., 64, 2201, 10.1016/j.matlet.2010.06.067 Wang, 2011, Characterization of polyetheretherketone–hydroxyapatite nanocomposite materials, Mater. Sci. Eng., A, 528, 3689, 10.1016/j.msea.2011.01.064 Wang, 2019, Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK, J. Mater. Process. Technol., 271, 62, 10.1016/j.jmatprotec.2019.03.016 Wong, 2009, Mechanical properties and in vitro response of strontium-containing hydroxyapatite/polyetheretherketone composites, Biomaterials, 30, 3810, 10.1016/j.biomaterials.2009.04.016 Yu, 2005, In vitro apatite formation and its growth kinetics on hydroxyapatite/polyetheretherketone biocomposites, Biomaterials, 26, 2343, 10.1016/j.biomaterials.2004.07.028 Zhao, 2012, Quantitative proteomic analysis of human osteoblast-like MG-63 cells in response to bioinert implant material titanium and polyetheretherketone, Journal of proteomics, 75, 3560, 10.1016/j.jprot.2012.03.033 Zhao, 2016, Response of human osteoblast to n-HA/PEEK—quantitative proteomic study of bio-effects of nano-hydroxyapatite composite, Sci. Rep., 6, 22832, 10.1038/srep22832 Zhao, 2016, Response of human osteoblast to n-HA/PEEK—quantitative proteomic study of bio-effects of nano-hydroxyapatite composite, Sci. Rep., 6, 1 Zheng, 2021, Effects of printing path and material components on mechanical properties of 3D-printed polyether-ether-ketone/hydroxyapatite composites, J. Mech. Behav. Biomed. Mater., 118, 104475, 10.1016/j.jmbbm.2021.104475