3D finite element simulation of tunnel boring machine construction processes in deep water conveyance tunnel
Tóm tắt
Applying stiffness migration method, a 3D finite element mechanical model is established to simulate the excavation and advance processes. By using 3D nonlinear finite element method, the tunnel boring machine (TBM) excavation process is dynamically simulated to analyze the stress and strain field status of surrounding rock and segment. The maximum tensile stress of segment ring caused by tunnel construction mainly lies in arch bottom and presents zonal distribution. The stress increases slightly and limitedly in the course of excavation. The maximum and minimum displacements of segment, manifesting as zonal distribution, distribute in arch bottom and vault respectively. The displacements slightly increase with the advance of TBM and gradually tend to stability.
Tài liệu tham khảo
Mair R J, Taylor R N. Bored tunnelling in the urban environment[C]. In: Proceedings of 14th International Conference on Soil Mechanics and Foundation Engineering (Vol. 4). Balkema, Hamburg, 1997. 2353–2385.
Komiya K, Soga K, Akagi H et al. Finite element modelling of excavation and advancement process of a shield tunneling machine[J]. Soils and Foundations, 1999, 39(3): 37–52.
Swoboda G, Abu-Krisha A. Three-dimensional numerical modelling for TBM tunnelling in consolidated clay [J]. Tunnelling and Underground Space Technology, 1999, 14(3): 327–333.
Zhu Hehua, Ding Wenqi, Li Xiaojun. Construction simulation for the mechanical behavior of shield tunnel and its application [J]. China Civil Engineering Journal, 2000, 33(3): 98–103(in Chinese).
Su Haidong. Two-dimension nonlinear FEM analysis for shield tunneling [J]. Journal of Yangtze River Scientific Research Institute, 2000, 17(4): 22–26(in Chinese).
Wang Minqiang, Chen Shenghong. 3-dimensional nonlinear finite element simulation of tunnel structure for moving-forward shield [J]. Chinese Journal of Rock Mechanics and Engineering, 2002, 21(2): 228–232(in Chinese).
Lin D G, Tseng C T, Phienwej N et al. 3D deformation analysis of earth pressure balance shield tunnelling in Bangkok subsoil [J]. Journal of the Southeast Asian Geotechnical Society, 2002(1): 13–27.
Kasper Thomas, Meschke Gunther. A 3D finite element simulation model for TBM tunnelling in soft ground [J]. International Journal for Numerical and Analytical Methods in Geomechanics, 2004, 28(14): 1441–1460.
Zhang Haibo, Yin Zongze, Zhu Jungao. 3D finite element simulation on deformation of soil mass during shield tunneling [J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(5): 755–760(in Chinese).
Mancinelli, Dotting L. Evaluation of superficial settle ments in low overburden tunnel TBM excavation: Numerical approaches [J]. Geotechnical and Geological Engineering, 2005, 23(3): 263–271.
Zhang Zhiqiang, He Chuan, She Caiga. Three-dimensional finite element modeling of excavation and advancement processes of shield tunnel construction in Nanjing metro [J]. Journal of the China Railway Society, 2005, 27(1): 84–89(in Chinese).
Yao Yong, Zeng Dongyang, Yan Qixiang. Analysis on the influence of shield tunnel construction to the segment ring and ground movement [J]. Journal of Southwest University of Science and Technology, 2006, 21(6): 20–25(in Chinese).
Jiang Xinliang, Zhao Zhimin, Li Yuan. Dynamic simulation of the effects of shield tunneling in Tianjin subway project on neighboring job facilities [J]. Journal of Tianjin University, 2006, 39(2): 188–193(in Chinese).
Ding Junhong, Jin Xianlong, Guo Yizhi et al. The threedimensional dynamic simulation of shield tunneling based on parallel computing [J]. Journal of Shanghai Jiaotong University, 2007, 41(1): 131–135(in Chinese).
Mroueh H, Shahrour I. A simplified 3D model for tunnel construction using tunnel boring machines [J]. Tunnelling and Underground Space Technology, 2008, 23(1): 38–45.
Liu Jianhang, Hou Xueyuan. Shield Method Tunnel [M]. China Railway Publishing House, Beijing, 1991(in Chinese).