3D analysis of thermal and stress evolution during laser cladding of bioactive glass coatings

〈http://www.engineeringtoolbox.com/emissivity-coefficients-d_447.html〉 Almeida, 2009, Bioactive sol-gel scaffolds with dual porosity for tissue engineering, J. Sol.-Gel Sci. Technol. Arstila H., Vedel E., Hupa L., Hupa M. Predicting physical and chemical properties of bioactive glasses from chemical composition. Part 2: devitrification characteristics, Glass Technology: European Journal of Glass Science and Technology, Part A, 49(6), 260–265. Beletskii, 2009, Silicon in living organisms and new generation biocomposite materials (review), Glass Ceram., 66, 104, 10.1007/s10717-009-9136-4 Berbecaru, 2009, Bioglass thin films for biomimetic implants, Appl. Surf. Sci., 255, 5476, 10.1016/j.apsusc.2008.08.020 Bharati, 2009, Studies on a novel bioactive glass and composite coating with hydroxyapatite on titanium based alloys: effect of γ-sterilization on coating, J. Eur. Ceram. Soc., 29, 2527, 10.1016/j.jeurceramsoc.2009.02.013 Bolelli, 2009, Microstructural and in vitro characterisation of high-velocity suspension flame sprayed (HVSFS) bioactive glass coatings, J. Eur. Ceram. Soc., 29, 2249, 10.1016/j.jeurceramsoc.2009.01.032 Chassaing G., Pougis A., Philippon S., Lipinski P., Meriaux J. Experimental and numerical study of frictional heating during rapid interactions of a Ti6Al4V tribopair, Wear, 〈doi:10.1016/j.wear.2015.09.013〉 Choi, 1994, Synthesis of Fe–Cr–C–W using laser cladding technique, J Mater. Sci., 29, 4460, 10.1007/BF00376268 Comesana, 2010, Laser cladding of bioactive glass coatings, Acta Biomater., 6, 953, 10.1016/j.actbio.2009.08.010 Comesaňa, 2011, Three-dimentional bioactive glass implants fabricated by rapid prototyping based on CO2 laser cladding, Acta Biomater., 7, 3476, 10.1016/j.actbio.2011.05.023 Corni, 2008, Electrophoretic deposition: from traditional ceramics to nanotechnology, J. Eur. Ceram. Soc., 28, 1353, 10.1016/j.jeurceramsoc.2007.12.011 D’Alessio, 1999, Pulsed laser ablation and deposition of bioactive glass as coating material for biomedical applications, Appl. Surf. Sci., 138–139, 527, 10.1016/S0169-4332(98)00610-2 Ducobu, 2014, Numerical contribution to the comprehension of saw-toothed Ti6Al4V chip formation in orthogonal cutting, Int. J. Mech. Sci., 81, 77, 10.1016/j.ijmecsci.2014.02.017 Fathi, 2008, Preparation and characterisation of sol-gel bioactive glass coating for improvement of biocompatibility of human body implant, Mater. Sci. Eng. A, 474, 128, 10.1016/j.msea.2007.05.041 Fathi, 2009, Bioactive glass nanopowder and bioglass coating for biocompatibility improvement of metallic implant, J. Mater. Process. Technol., 209, 1385, 10.1016/j.jmatprotec.2008.03.051 Foppiano, 2006, Functionally graded bioactive coatings: reproducibility and stability of the coating under cell culture conditions, Acta Biomater., 2, 133, 10.1016/j.actbio.2005.12.003 Furlong, 1991, Fixation of hip prostheses by hydroxyapatite ceramic coatings, J. Bone Jt. Surg. Br., 73, 741, 10.1302/0301-620X.73B5.1654336 Gabbi, 1995, Bioactive glass coating: physicochemical aspects and biological findings, Biomaterials, 16, 512, 10.1016/0142-9612(95)91123-G Gallardo, 2001, Bioactive and protective sol-gel coatings on metals for orthopaedic prostheses, J. Sol–Gel Sci. Technol., 21, 65, 10.1023/A:1011257516468 Gerhardt, 2010, Bioactive glass and glass–ceramic scaffolds for bone tissue engineering, Materials, 3, 3867, 10.3390/ma3073867 Gmeiner, 2015, Additive manufacturing of bioactive glasses and silicate bioceramics, J. Ceram. Sci. Technol., 6, 75 Gomez-Vega, 2000, Bioactive® glass coatings with hydroxyapatite and bioglass particles on Ti-based implants. 1. Processing, Biomaterials, 21, 105, 10.1016/S0142-9612(99)00131-3 Hench, 1991, Bioceramics: from concept to clinic, J. Am. Ceram. Soc., 74, 1487, 10.1111/j.1151-2916.1991.tb07132.x Hench, 1998, Biomaterials: a forecast for the future, Biomaterials, 19, 1419, 10.1016/S0142-9612(98)00133-1 Hench, 2009, Genetic design of bioactive glass, J. Eur. Ceram. Soc., 29, 1257, 10.1016/j.jeurceramsoc.2008.08.002 Hench, 1993 Herman, 2000, Thermal spray: current status and future trends, MRS Bull., 25, 17, 10.1557/mrs2000.119 Hing, 2004, Mediation of bone ingrowth in porous hydroxyapatite bone graft substitutes, J. Biomed. Mater. Res. A, 68, 187, 10.1002/jbm.a.10050 Hupa, 2010, Comparison of bioactive glasses in vitro and in vivo, Glass Technol.: Eur. J. Glass Sci. Technol. A, 51, 89 Kathuria, 2000, Some aspects of laser surface-cladding in the turbine industry, Surf. Coat. Technol., 132, 262, 10.1016/S0257-8972(00)00735-0 Killinger, 2006, High-velocity suspention flame spraying (HVSFS), a new approach for spraying nanoparticles with hypersonic speed, Surf. Coat. Technol., 21, 1922, 10.1016/j.surfcoat.2006.04.034 Kim, 2005, Surface bio-modification of titanium implants by an enamel process, J. Ceram. Process. Res., 6, 338 Kokubo, 1986, Formation of a high-strength bioactive glass-ceramic in the system MgO-CaO-SiO2-P2O5, J. Mater. Sci., 21, 536, 10.1007/BF01145520 Kongsuwan, 2015, Laser induced porosity and crystallinity modification of a bioactive glass coating on titanium substrates, J. Manuf. Sci. Eng., 137, 031004, 10.1115/1.4029566 Li, 2005, Preparation and charcterisation of macroporous sol-gel bioglass, Ceram. Int., 31, 641, 10.1016/j.ceramint.2004.05.011 Lopez-Esteban, 2003, Bioactive glass coatings for orthopaedic metallic implants, J. Eur. Ceram. Soc., 23, 2921, 10.1016/S0955-2219(03)00303-0 Lusquiňos, 2001, Production of calcium phosphate coatings on Ti6Al4V obtained by Nd:yttrium-aluminum-garnet laser cladding, J. Appl. Phys., 90, 4231, 10.1063/1.1402975 Lusquiňos, 2003, Calcium phosphate coatings obtained by Nd:YAG laser cladding: physico-chemical and biological properties, J. Biomed. Mater. Res., 64A, 630, 10.1002/jbm.a.10440 Lusquiňos, 2005, Main characteristics of calcium phosphate coatings obtained by laser cladding, Appl. Surf. Sci., 247, 486, 10.1016/j.apsusc.2005.01.134 Pilon, 2014, Effective thermal conductivity of soda-lime silicate glassmelts with different iron contents between 1100°C and 1500°C, J. Am. Ceram. Soc., 97, 442, 10.1111/jace.12768 Popescu, 2009, Biocompatable and bioactive nanostructured glass coatings synthesized by pulsed laser deposition: in vitro biological tests, Appl. Surf. Sci., 255, 5486, 10.1016/j.apsusc.2008.10.031 Przybyłowicz, 2000, Laser cladding and erosive wear of Co–Mo–Cr–Si coatings, Surf. Coat. Technol., 125, 13, 10.1016/S0257-8972(99)00563-0 Ratchev, 2011, Mathematical modelling and integration of micro-scale residual stresses into axisymmetric FE models of Ti6Al4V alloy in turning, CIRP J. Manuf. Sci. Technol., 4, 80, 10.1016/j.cirpj.2011.03.002 Saiz, 2002, In vitro behavior of silicate glass coatings on Ti6Al4V, Biomaterials, 23, 3749, 10.1016/S0142-9612(02)00109-6 Sexton, 2002, Laser cladding of aerospace materials, J. Mater. Process. Technol., 122, 63, 10.1016/S0924-0136(01)01121-9 Shabnam Hosseini, 2012. Fatigue of Ti-6Al-4V, Biomedical Engineering – Technical Applications in Medicine, Dr. Radovan Hudak (Ed.), ISBN: 978-953-51-0733-0, InTech, DOI: 10.5772/45753. Available from: 〈http://www.intechopen.com/books/biomedical-engineering-technical-applications-in-medicine/fatigue-of-ti-6al-4v〉 Sola, 2011, Bioactive glass coatings: a review, Surf. Eng., 27, 560, 10.1179/1743294410Y.0000000008 Srivastava, 2012, Elastic properties of substituted 45S5 bioactive glasses and glass–ceramics, Int. J. Sci. Eng. Res., 3, 1 Tang, 2006, Nanomechanical properties evaluation of bioactive glass coatings on titanium alloy substrate, J. Optoelectron. Adv. Mater., 8, 1194 Torrisi, 1993, Thermally assisted hydroxyapatite obtained by pulse-laser deposition on titanium substrates, Thin Solid Films, 227, 32, 10.1016/0040-6090(93)90183-P Vedel E., Arstila H., Ylänen H., Hupa L., Hupa M. Predicting physical and chemical properties of bioactive glasses from chemical composition. Part 1: viscosity characteristics. Glass Technology: European Journal of Glass Science and Technology, Part A, 49(6), 251–259. Vijayalakshmi, 2005, Synthethis and characterization of porous silica gels for biomedical applications, Trends Biomater. Rtif. Organs, 18, 101 Wang, 2008, In situ synthesis of hydroxyapatite coating by laser cladding, Colloids Surf. B Biointerfaces, 66, 155, 10.1016/j.colsurfb.2008.06.003 2011 Yang, 2010, Experimental investigation and 3D finite element prediction of the heat affected zone during laser assisted machining of Ti6Al4V alloy, J. Mater. Process. Technol., 210, 2215, 10.1016/j.jmatprotec.2010.08.007