“Traveling-wave tube mechanics simulator suite” a CAD/CAE integrated rapid redesign system of vibration analysis for traveling-wave tubes

Abrams, 2001, Vacuum electronics for the 21st century, IEEE Microw Mag, 2, 61, 10.1109/6668.951550 Parker, 2002, Vacuum electronics, IEEE T Micro Theory, 50, 835, 10.1109/22.989967 Gaertner, 2012, Historical development and future trends of vacuum electronics, J Vac Sci Technol B, 30, 10.1116/1.4747705 Yeh, 1987, The role of structural stability in the reliability of microwave vacuum devices, IEEE T Electron Dev, 34, 494, 10.1109/T-ED.1987.22952 Yeh, 1987, Failure analysis of ceramic feedthroughs used in traveling-wave tubes, IEEE T Electron Dev, 34, 1862, 10.1109/T-ED.1987.23166 Kumar, 2003, Review of progress in indigenous design, development & production of microwave vacuum-electronic devices, IETE Tech Rev, 20, 75, 10.1080/02564602.2003.11417072 Laurent, 2009, High-power C-and X-band radar helix TWTs, IEEE T Electron Dev, 56, 906, 10.1109/TED.2009.2015409 Khorrami, 2014 Li, 2015, Thermal design of high efficiency, high reliability pulsed space TWT's grid-controlled electron gun, IEEE T Electron Dev, 62, 1648, 10.1109/TED.2015.2415255 Antonsen, 1999, Advances in modeling and simulation of vacuum electronic devices, P IEEE, 87, 804, 10.1109/5.757256 Antonsen, 2008, Advances in modeling of vacuum electronic devices Levush, 2015, Modeling and simulation of millimeter wave vacuum electronic devices at the naval research laboratory Li, 2009, Theory and design of microwave-tube simulator suite, IEEE T Electron Dev, 56, 919, 10.1109/TED.2009.2015413 Li, 2014, Recent developments to the microwave tube simulator suite, IEEE T Electron Dev, 61, 1735, 10.1109/TED.2014.2307058 Yuan, 2017, Mechanical analysis of Ku band radiation cooled space travelling wave tube Park, 2010, Structural optimization based on CAD–CAE integration and metamodeling techniques, Comput Aided Design, 42, 889, 10.1016/j.cad.2010.06.003 Xia, 2015, A CAD/CAE incorporate software framework using a unified representation architecture, Adv Eng Softw, 87, 68, 10.1016/j.advengsoft.2015.05.005 Wang, 2016, “Seen Is Solution” a CAD/CAE integrated parallel reanalysis design system, Comput Method Appl M, 299, 187, 10.1016/j.cma.2015.10.022 Matin, 2012, A CAD/CAE-integrated injection mold design system for plastic products, Int J Adv Manuf Tech, 63, 595, 10.1007/s00170-012-3926-5 Liu, 2015, A novel CACD/CAD/CAE integrated design framework for fiber-reinforced plastic parts, Adv Eng Softw, 87, 13, 10.1016/j.advengsoft.2015.04.013 Wang, 2017, A CAD/CAE-integrated structural design framework for machine tools, Int J Adv Manuf Tech, 91, 545, 10.1007/s00170-016-9721-y Wang, 2014, A CAD/CAE integrated framework for structural design optimization using sequential approximation optimization, Adv Eng Softw, 76, 56, 10.1016/j.advengsoft.2014.05.007 Hamri, 2010, Software environment for CAD/CAE integration, Adv Eng Softw, 41, 1211, 10.1016/j.advengsoft.2010.07.003 Nagashima, 2000, Development of a CAE system based on the node-by-node meshless method, Comput Method Appl M, 187, 1, 10.1016/S0045-7825(99)00135-8 Hughes, 2005, Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement, Comput Method Appl M, 194, 4135, 10.1016/j.cma.2004.10.008 Cottrell, 2009 Bazilevs, 2010, Isogeometric analysis using T-splines, Comput Method Appl M, 199, 229, 10.1016/j.cma.2009.02.036 Beer, 2015, A simple approach to the numerical simulation with trimmed CAD surfaces, Comput Method Appl M, 285, 776, 10.1016/j.cma.2014.12.010 Akhras, 2017, Towards an automatic isogeometric analysis suitable trivariate models generation—Application to geometric parametric analysis, Comput Method Appl M, 316, 623, 10.1016/j.cma.2016.09.030 Xu, 2018, Constructing IGA-suitable planar parameterization from complex CAD boundary by domain partition and global/local optimization, Comput Method Appl M, 328, 175, 10.1016/j.cma.2017.08.052 Shapiro, 2011, Geometric issues in computer aided design/computer aided engineering integration, J Comput Inf Sci Eng, 11, 10.1115/1.3593416 Li, 2013, A goal-oriented error estimator for the analysis of simplified designs, Comput Method Appl M, 255, 89, 10.1016/j.cma.2012.11.010 Zhuang, 2012, Integration of subdivision method into boundary element analysis, Int J Comp Meth-Sing, 9 Huang, 2017, Closed loop geometry based optimization by integrating subdivision, reanalysis and metaheuristic searching techniques, Comput Struct, 182, 459, 10.1016/j.compstruc.2017.01.005 Hu, 2018, Closed-loop optimization and investigation of bistable interlocked structure, Int J Mech Sci, 144, 10, 10.1016/j.ijmecsci.2018.05.037 Wang, 2009, Integration of CAD and boundary element analysis through subdivision methods, Comput Ind Eng, 57, 691, 10.1016/j.cie.2009.01.009 Shen, 2016, Converting a CAD model into a non-uniform subdivision surface, Comput Aided Geom D, 48, 17, 10.1016/j.cagd.2016.07.003 Reif, 2018, Old problems and new challenges in subdivision, J Comput Appl Math Cashman, 2012 Liu, 2018, Isogeometric FEM-BEM coupled structural-acoustic analysis of shells using subdivision surfaces, Int J Numer Meth Eng, 113, 1507, 10.1002/nme.5708 Kirkwood, 2018, Sustained CAD/CAE integration: integrating with successive versions of step or IGES files, Eng Comput, 34, 1, 10.1007/s00366-017-0516-z Louhichi, 2015, CAD/CAE integration: updating the CAD model after a FEM analysis, Int J Adv Manuf Tech, 76, 391, 10.1007/s00170-014-6248-y Gujarathi, 2011, Parametric CAD/CAE integration using a common data model, J Manuf Syst, 30, 118, 10.1016/j.jmsy.2011.01.002 Yin, 2017, The modal analysis of high-frequency circuit in microwave tube based on finite element method Hajela, 1990, Structural damage detection based on static and modal analysis, AIAA J, 28, 1110, 10.2514/3.25174 Lanczos, 1950 Paige, 1972, Computational variants of the Lanczos method for the eigenproblem, IMA J Appl Math, 10, 373, 10.1093/imamat/10.3.373 Parlett, 1979, The Lanczos algorithm with selective orthogonalization, Math Comput, 33, 217, 10.1090/S0025-5718-1979-0514820-3 Simon, 1984, Analysis of the symmetric Lanczos algorithm with reorthogonalization methods, Linear Algebra Appl, 61, 101, 10.1016/0024-3795(84)90025-9 Bathe, 1973, Solution methods for eigenvalue problems in structural mechanics, Int J Numer Meth Eng, 6, 213, 10.1002/nme.1620060207 Bathe, 2013, The subspace iteration method–revisited, Comput Struct, 126, 177, 10.1016/j.compstruc.2012.06.002 Hurty, 1965, Dynamic analysis of structural systems using component modes, AIAA J, 3, 678, 10.2514/3.2947 Jakobsson, 2011, A posteriori error analysis of component mode synthesis for the elliptic eigenvalue problem, Comput Method Appl M, 200, 2840, 10.1016/j.cma.2011.05.002 Bathe, 2014, Component mode synthesis with subspace iterations for controlled accuracy of frequency and mode shape solutions, Comput Struct, 139, 28, 10.1016/j.compstruc.2014.03.003 Calvetti, 1994, An implicitly restarted Lanczos method for large symmetric eigenvalue problems, Electron T Numer Ana, 2, 1 Wu, 1999, Thick-restart Lanczos method for electronic structure calculations, J Comput Phys, 154, 156, 10.1006/jcph.1999.6306 Najafi, 2007, A new restarting method in the Lanczos algorithm for generalized eigenvalue problem, Appl Math Comput, 184, 421, 10.1016/j.amc.2006.06.079 Lehoucq, 1998, Vibrational eigenstates of four-atom molecules: a parallel strategy employing the implicitly restarted Lanczos method, Comput Phys Commun, 109, 15, 10.1016/S0010-4655(98)00002-2 Yang, 2017, An improved parallel block Lanczos algorithm over GF (2) for integer factorization, Inf Sci, 379, 257, 10.1016/j.ins.2016.09.052 Ericsson, 1980, The spectral transformation Lanczos method for the numerical solution of large sparse generalized symmetric eigenvalue problems, Math Comput, 35, 1251 Golub, 2012 Duff, 1983, The multifrontal solution of indefinite sparse symmetric linear, ACM Trans Math Soft, 9, 302, 10.1145/356044.356047 Liu, 1992, The multifrontal method for sparse matrix solution: theory and practice, SIAM Rev, 34, 82, 10.1137/1034004 Amestoy, 2015, Improving multifrontal methods by means of block low-rank representations, SIAM J Sci Comput, 37, A1451, 10.1137/120903476 Wang, 2015, An inverse-based multifrontal block incomplete LU preconditioner for the 3-D finite-element eigenvalue analysis of lossy slow-wave structures, IEEE T Micro Theory, 63, 2094, 10.1109/TMTT.2015.2432771 Lee, 2004, p-Type multiplicative Schwarz (pMUS) method with vector finite elements for modeling three-dimensional waveguide discontinuities, IEEE T Micro Theory, 52, 864, 10.1109/TMTT.2004.823554 Zhang, 2000, On preconditioning Schur complement and Schur complement preconditioning, Electron T Numer Ana, 10, 115 Lin, 2001, Accurate and highly efficient algorithms for structural stationary/non-stationary random responses, Comput Method Appl M, 191, 103, 10.1016/S0045-7825(01)00247-X Lin, 1992, A fast CQC algorithm of PSD matrices for random seismic responses, Comput Struct, 44, 683, 10.1016/0045-7949(92)90401-K Krasner, 1988, A description of the model-view-controller user interface paradigm in the smalltalk-80 system, J Object Orient Programm, 1, 26 Corp. S. 3D ACIS MODELING. https://www.spatial.com/products/3d-acis-modeling2013. Inc. S. Simmetrix’ Modeling Suite. http://www.simmetrix.com2013. 3D TS. HOOPS 3D Application Framework. https://www.techsoft3d.com2011. Inc. A. ANSYS. http://www.ansys.com2016. Kirsch, 2000, Combined approximations–a general reanalysis approach for structural optimization, Struct Multidiscip O, 20, 97, 10.1007/s001580050141 Huang, 2011, Modified combined approximations and the application in reanalysis of vehicle frame stiffness, J Mech Eng, 47, 86, 10.3901/JME.2011.18.086 Wang, 2013, A parallel reanalysis method based on approximate inverse matrix for complex engineering problems, J Mech D, 135 Zuo, 2017, Sensitivity reanalysis of vibration problem using combined approximations method, Struct Multidiscip O, 55, 1399, 10.1007/s00158-016-1586-z Huang, 2014, A reanalysis method for local modification and the application in large-scale problems, Struct Multidiscip O, 49, 915, 10.1007/s00158-013-1022-6 Saito, 2015, Efficient forced vibration reanalysis method for rotating electric machines, J Sound Vib, 334, 388, 10.1016/j.jsv.2014.09.004 Rieger, 1986, Relationship between finite element analysis and modal analysis, Nature, 369, 436 Zienkiewicz, 2013 Zhu, 2006 Castro, 2016, Three dimensional hierarchical mixed finite element approximations with enhanced primal variable accuracy, Comput Method Appl M, 306, 479, 10.1016/j.cma.2016.03.050 Bathe, 1996 Xu, 2010, Accurate and fast finite-element modeling of attenuation in slow-wave structures for traveling-wave tubes, IEEE Trans Electron Devices, 59, 1534, 10.1109/TED.2012.2186140 Bramble, 1991, Convergence estimates for product iterative methods with applications to domain decomposition, Math Comput, 57, 1, 10.1090/S0025-5718-1991-1090464-8 Smith, 2004 Karypis, 1998, A fast and high quality multilevel scheme for partitioning irregular graphs, SIAM J Sci Comput, 20, 359, 10.1137/S1064827595287997 Xie, 2016, Thermal analysis of Helix slow-wave structure using finite element method