The simulation of solid—liquid adsorption in activated carbon columns using estimates of intraparticle kinetic parameters obtained from continuous stirred tank reactor experiments

Anabela Leitão1, Alírio Rodriguez2
1Department of Chemical Engineering, Faculty of Engineering, Agostinho Neto University, P.O. Box 1756, Luanda, Angola
2Laboratory of Separation and Reaction Engineering, School of Engineering, University of Porto, 4099 Porto Codex Portugal

Tài liệu tham khảo

Leitão, 1992, Modeling of solid-liquid adsorption: effects of adsorbent loads on model parameters, Can. J. Chem. Eng., 70, 690, 10.1002/cjce.5450700411 Leitão, 1993, Modelling of solid-liquid adsorption: effects of adsorbent heterogeneity, Chem. Eng. J., 51, 159, 10.1016/0300-9467(93)80026-K Seidel, 1989, The concentration dependence of surface diffusion for adsorption on energetically heterogeneous adsorbents, Chem. Eng. Sci., 44, 189, 10.1016/0009-2509(89)85244-3 Peel, 1981, A branched pore kientic model for activated carbon adsorption, AIChE J., 27, 26, 10.1002/aic.690270106 Leitão, 1994, Tracer experiments in fixed-beds: effects of flow maldistribution on the estimation of transport kinetic parameters, Chem. Eng. J., 53, 193 Finlayson, 1980 Madsen, 1979, PDECOL: general collocation software for partial differential equations, ACM Trans. Math. Software, 5, 326, 10.1145/355841.355849 Evans, 1953, Mass transfer from benzoic acid granules to water in fixed and fluidized beds at low Reynolds numbers, Chem. Eng. Prog., 49, 135