Prediction of the fatigue behaviour of physically vapour deposited coatings in the ball-on-rod rolling contact fatigue test, using an elastic–plastic finite elements method simulation

Wear - Tập 206 - Trang 197-203 - 1997
K.-D Bouzakis1, N Vidakis1
1Laboratory for Machine Tool and Machine Dynamics, Aristoteles University, Thessaloniki, Greece

Tài liệu tham khảo

K.-D. Bouzakis and N. Vidakis, The fatigue performance of thin hard PVD coatings in bearing applications, Proc. 7th Int. Danube Adria Association for Automation and Manufacturing (DAAAM) Symp., Vienna, 17–19 October 1996, publisher DAAAM international, Vienna 1996, pp. 53–54

K.-D. Bouzakis and N. Vidakis, Effect of the mechanical stresses developed during gear hobbing on the fatigue failure of tool coatings, Int. J. Manufact. Sci. Product., (1996) in press

O. Knotek et al., A new technique for testing the impact load of thin films: the coating impact test, Surf. Coat. Technol., 54–55 (1992) 102–107.

K.-D. Bouzakis et al., Determination of the fatigue behaviour of thin hard coatings using the impact test and a FEM simulation, Proc. Int. Conf. on Metallurgical Coatings and Thin Films, ICMTF96, April 1996, San Diego, CA, in Surf. Coat. Technol., Vol. 86–87 pp. 549–556.

O. Lemmer et al., The contribution of CemeCon to the BRITE project EUROBEARINGS N°BRE2-CT92-0333, Third Annual Report, 1995 (BRITE, Turin).

K.-D. Bouzakis et al., The contribution of the Laboratory for Machine tools and Machine Dynamics (LMD) to the BRITE project EUROBEARINGS N°BRE2-CT92-0333, Third Annual Report, 1995 (BRITE, Turin).

K.-D. Bouzakis and N. Vidakis, An evaluation method of thin PVD films adhesion using the impact test and a FEM simulation of the contact response, Tribol. Ind., 3 (1995) 69–75.

H. Djabella and R.D. Arnell, Finite element analysis of the contact stresses in an elastic coating on an elastic substrate, Thin Solid Films, 213 (1992) 205–219.

P.K. Gupta and J.A. Walowit, Contact stresses between an elastic cylinder and a layered elastic solid, J. Lubr. Technol., 96 (April 1974) 250–257.

C.H. Kuo and L.M. Keer, Contact stress analysis of a layered transversely isotropic half-space, J. Tribol., 114 (1992) 253–262.

K. Komvopoulos, Elastic–plastic finite element analysis of indented layered media, J. Tribol., 111 (1989) 430–439.

J.R. Cahoon, W.H. Broughton and A.R. Kutzak, The determination of yield strength from hardness measurements, Metall. Trans., 2 (1971) 1971–1983.

L.E. Samuels Author Collective Works, Micro Indentation Techniques in Materials Science and Engineering, ASTM Symp., ASTM, Philadelphia, PA, 1984, pp. 15–18

A. Igartua et al., The contribution of TEKNIKER to the BRITE project EUROBEARINGS N°BRE2-CT92-0333, Third Annual Report, 1995 (BRITE, Turin).

A. Igartua et al., Application of low temperature PVD coatings in rolling bearings, tribological tests and experiences with spindle bearing systems, Int. Conf. on Metallurgical Coatings and Thin Films, San Diego, CA, April 1996, ICMTF96. Also in Surf. Coat. Technol., Vol. 86–87 pp. 460–466.

K.-D. Bouzakis and N. Vidakis, Determination of plastic behaviour of hard materials using the Rockwell B test and a FEM simulation, Proc. Second Int. Conf. Balcantrib 96, Thessaloniki, 5–7 June DN-R300, Houston, USA, 1996, 1996, pp. 448–459.

ANSYS User Manuals, Vol. 1 Theory, Vol. 2 Procedures, Vol. 3 Elements, Vol. 4 Commands, Swanson Analysis System Inc., DN-R300, Houston, USA, 1995.

Thông tin
Thông tin xuất bản

Wear

Tập 206

197-203

Thông tin tác giả